Great! Thanks.
Sent from Nine<http://www.9folders.com/>
From: Andy Durbin
Sent: Sunday, December 10, 2023 1:58 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT500 Sleep current?
"Anyone interested in the current draw for Sleep and Off (
"Anyone interested in the current draw for Sleep and Off (but powered) states
could simply put a multimeter in the PSU lead. I would expect a difference in
current between Off and Sleep that would depend strongly on the number of
tuning relays that were active while sleeping. No relays are act
"Off" and "sleep" are not the same states. Also "Off" is not the same state as
"not powered".
"PS Power on/off
GET format: PS;
SET/RESPONSE format: PS0; or PS1;
Turns the KAT500 ON (PS1;) or OFF (PS0;).
The KAT500’s microcontroller operates whenever DC power is applied. LEDs and
relays are off
gene W2HX
> Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx/videos
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net On
> Behalf Of G4GNX
> Sent: Saturday, December 9, 2023 5:41 PM
> To: Elecraft Reflector
> Subject: Re: [Elecraft] KAT500
2hx/videos
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of G4GNX
Sent: Saturday, December 9, 2023 5:41 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] KAT500 Sleep current?
From the KAT500 manual:
"Idle Sleep
In some installations a 28004.5 MHz signal may b
From the KAT500 manual:
"Idle Sleep
In some installations a 28004.5 MHz signal may be heard from an oscillator in
the KAT500. If this is an issue, you can shut it down when it is not needed.
Click on Idle Sleep to put a check in the radio button. The oscillator will
stop running shortly after
When I use the KAT Utility to power down the KAT500, anyone know how much
current it consumes in this sleeping mode? I ask because I was surprised that I
had a dead battery this morning after a week or so of non-use (battery is a
rechargeable Lipo so no problem) but I was wondering how "asleep"
7 matches
Mail list logo