- Original Message -
From: "Joe Word"
To:
Sent: Thursday, September 09, 2010 1:53 PM
Subject: [Elecraft] KPA-500 Features and Pricing
>I agree with Jack's comments below 100%. Sounds like the amp is way
> over priced to me.
>
> Joe N9VX
> no K3 at t
I agree with Jack's comments below 100%. Sounds like the amp is way
over priced to me.
Joe N9VX
no K3 at this time, but thinking about another one.
-
It looks like El
You make some very good points. Since you sent this to me directly, no one in
Aptos will see it but me. Perhaps you should post it on the reflector?
I'm sure Elecraft doesn't intend to compete with MFJ, but I don't think they
are in the Alpha league either. The K3 is a good product at a good
On Thu, 09 Sep 2010 11:28:29 -0400, Joe Subich, W4TV wrote:
>Yes, the KPA-500 we've been seeing at
>the hamfests has some interesting features but it is hard to
>justify a nearly 100% premium over the ALS-600 for a smaller
>form factor, six meters, QSK, and the Elecraft nameplate.
FWIW, the 6M-on
I'm not so sure. It's the same size as the K3, which is absolutely tiny.
Including the
built-in power supply, it's relatively light. So for operation in the field,
that is a big
plus. For those who operate 6 meters, that's imperative. For those who want QSK
-- again,
imperative.
Not to menti
Yeah, but . . . . . . . .
We've accepted this for years, reference ETO and Alpha Amplifiers.
And yes, I am a yuppie.
Dan -- N3ND
-Original Message-
From: Joe Subich, W4TV
To: elecraft@mailman.qth.net
Sent: Thu, Sep 9, 2010 11:28 am
Subject: Re: [Elecraft] KPA-500 Fea
Phil,
> Jack You are soo mean... "Stupid Yuppies"...
While "Stupid Yuppies" may be a bit harsh, Jack has an excellent
point on the price/performance point of the KPA-500 based on the
current "whisper price." Yes, the KPA-500 we've been seeing at
the hamfests has some interesting features but i
Ewww, Jack You are soo mean... "Stupid Yuppies"... Come on Jack, why so angry
at a great USA company that ACTUALLY builds some great products?
Phil
Santa Fe
> It looks like Elecraft may be abandoning their traditional "most bang
> for the buck" market position in favor of selling over priced
It is full QSK, but silent, using PIN diodes rather than vacuum relays.
73,
Lyle KK7P
> What I'm more interested as a big CW operator, rag chewer, DXer, es
> Contester, is It's ability to handle full seamless silent QSK using quality
> vacuum relays.
>
___
It looks like Elecraft may be abandoning their traditional "most bang
for the buck" market position in favor of selling over priced "matching
accessories" to stupid yuppies.
Unlike the K3, a $2000 500W amp is not going to be in the "best value"
position in anyone's analysis, although I'm sur
: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken Chandler
Sent: Thursday, September 09, 2010 4:04 AM
To: tom_k1tl
Cc:
Subject: Re: [Elecraft] KPA-500 Features and Pricing
What I'm more interested as a big CW operator, rag chewer, DXer, es
Contester, is It'
"Plus a power supply and in VK land we pay very dearly for 100amp switcher.
I would not see a lot of difference in an ALS-600 + Power supply and the
KPA-500 with it's onboard power supply sitting alongside my K3...Grin"
The ALS-600 price (about $1250) includes the power supply. BUT - no
6-met
power
output. The MRF150's also have very good IMD performance.
73
John
--- On Thu, 9/9/10, Ken Chandler wrote:
> From: Ken Chandler
> Subject: Re: [Elecraft] KPA-500 Features and Pricing
> To: "tom_k1tl"
> Cc: ""
> Date: Thursday, September 9, 2010, 1:0
What I'm more interested as a big CW operator, rag chewer, DXer, es Contester,
is It's ability to handle full seamless silent QSK using quality vacuum relays.
Have Elecraft got that bit right!!
Ken..G0ORH K2, K3, P3.
Sent from my iPhone
On 8 Sep 2010, at 21:14, "tom_k1tl" wrote:
>> F
Plus a power supply and in VK land we pay very dearly for 100amp switcher.
I would not see a lot of difference in an ALS-600 + Power supply and the
KPA-500 with it's onboard power supply sitting alongside my K3...Grin
Gary
On Thu, Sep 9, 2010 at 12:30 PM, Doug Person wrote:
> I use an Amerit
I use an Ameritron ALS-600 along with the MFJ 600 watt autotuner.
Together, this combination just breaks $1500. It works superbly with
the K3. The KPA-500 is expected to be priced around $2200. Worth every
penny I'm sure and I'll be among the first wave to order it. But, it
doesn't stop
At 9/8/2010 04:14 PM, tom_k1tl wrote:
> >From what I heard that the price may be $2000+. That price may not be "set
>in stone".
>It suppose to put out 500-600w even into the 6m band...neat!! What is nice
>about it
>if you are on 20m and have the amp set on 10m, it automatically goes to the
>20m ba
I seem to recall hints of external tunerS/matching unitS...desktop and
remote. It seems the power handling capability was to be in the range of
the KPA500.
If the above is correct, I wouldn't be surprised if a desktop version were
the size of a P3...6.1" wide x 4" high...
Conjecture and supposit
>From what I heard that the price may be $2000+. That price may not be "set
in stone".
It suppose to put out 500-600w even into the 6m band...neat!! What is nice
about it
if you are on 20m and have the amp set on 10m, it automatically goes to the
20m band
on the first "dit" or contact closure...fu
What I learned at the Elecraft booth
at Boxboro Convention is that there is
no ATU built in to the KPA500. I do not
know it there will be an external ATU
appropriate to that power lever. No info
on the expected price.
73, Ken K3IU
~
On 9/8/2010 3:12 PM, K4SC
After 45 years on the air, I'm finally getting an itch to bump my power over
100 watts; 500 - 600 watts seems like a reasonable amount of 75 meter power
for me. I'm seriously looking at amplifiers and tuners, but hesitant to
make a purchase decision before getting at least some warm fuzzies about
> KPA500 power supply...
> ... Is the toroid rated in such a way that no
> saturation/overheating will occur with the European mains frequency of 50Hz?
The The KPA500 power transformer toroid is rated for operation at 50 Hz
as well as 60Hz.
73,
Lyle KK7P
___
Hi Wayne and thanks for the info re KPA500 power supply
The toroid transformer in the KPA 500 takes up most of the space available
in the K3-sized cabinet and it is amazing that the developers managed to add
a linear regulator and even a 500W amp etc. – hi!
Now toroids are a bit "hard" on the inr
Yes. The KPA500 has an internal 60-V linear DC supply based on a
toroidal transformer.
73,
Wayne
N6KR
Barry Simpson wrote:
> Does anyone know if the KPA 500 has a built in power supply ?
__
Elecraft mailing list
Home: http://mailman
Yes Barry, it does.
Jeff Cochrane
VK4BOF
Innisfail QLD
Australia
Elecraft K3 #4257
- Original Message -
From: Barry Simpson
To: elecraft@mailman.qth.net
Sent: Friday, July 30, 2010 2:20 PM
Subject: [Elecraft] KPA 500
Does anyone know if the KPA 500 has a built in power
Does anyone know if the KPA 500 has a built in power supply ?
Barry Simpson VK2BJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qt
> ...I presently own a QRP rig which puts out 5w but,
> eventually, I'll upgrade to a 100w PA. My question is whether the KPA-500
> would function adequately with the QRP rig.
I've successfully used the KPA500 with less than 5 watts drive in
prototype testing. It does what you'd expect given t
I've been watching the details regarding the as-yet-to-be-released Elecraft
KPA-500 amplifier. I presently own a QRP rig which puts out 5w but,
eventually, I'll upgrade to a 100w PA. My question is whether the KPA-500
would function adequately with the QRP rig. Presuming 15db pow
> To: "Tony Lyon"
> Cc: "Elecraft Reflector"
> Sent: Wednesday, April 21, 2010 5:38 PM
> Subject: Re: [Elecraft] KPA-500 Question
>
>
>> Hi Tony,
>>
>> The KPA-500 is designed to work with any radio.
>>
>> 73, Eric WA6HHQ
>
d my P3. Now waiting on the KPA-500!
>
> Dave, N4QS
>
>
> - Original Message -
> From: "Eric Swartz"
> To: "Tony Lyon"
> Cc: "Elecraft Reflector"
> Sent: Wednesday, April 21, 2010 5:38 PM
> Subject: Re: [Elecraft] KPA-500 Question
>
>
>&
;Tony Lyon"
Cc: "Elecraft Reflector"
Sent: Wednesday, April 21, 2010 5:38 PM
Subject: Re: [Elecraft] KPA-500 Question
> Hi Tony,
>
> The KPA-500 is designed to work with any radio.
>
> 73, Eric WA6HHQ
> ---
>
> On 4/20/2010 5:51 AM, Tony Lyon wrote:
>>
Hi Tony,
The KPA-500 is designed to work with any radio.
73, Eric WA6HHQ
---
On 4/20/2010 5:51 AM, Tony Lyon wrote:
> Eric,
> Will the KPA-500 be designed to support both the K2 and the K3,
> or just the K3?
>
> 73,
> Tony Lyon ( KJ5XF)
>
>
_
What are the comparitive amounts of heat produced in a solid-state amplifier
in the RF section vs. the Power Supply section?
73,
Dick - KA5KKT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http:/
Yep, 7 dB is better than 5 dB. ;-)
--- On Tue, 4/20/10, ynkedra...@aol.com wrote:
> Is 500 watts not enough? For the rarest of the rare
> DX, for top-ten contest results, maybe not. But it is
> a better-than-5 dB improvement from exciter level.
Guess it depends on operations and locations, but I see the KPA-500 meeting
some broad operating needs.
I frequently operate portable, for contests, and enjoy a power boost above
exciter level power.
I've looked at the somewhat portable ACOM 1010, but it lacks 6 meter coverage
and full break-
901 - 935 of 935 matches
Mail list logo