d
Marco HB9CAT
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
Subich, W4TV
Sent: sabato, 22. agosto 2015 01:37
To: Elecraft Reflector
Subject: Re: [Elecraft] Microham Station Master Inhibit -> K3 ?
> Then why do I measure 12V in "rest
only ones using Station Masters with Elecraft ? Curious to
gather experiences
Marco HB9CAT
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
Subich, W4TV
Sent: giovedì, 20. agosto 2015 22:14
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Mic
, 20. agosto 2015 22:14
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Microham Station Master Inhibit -> K3 ?
> According to the Microham manual this output is provided to be >
connected to Yaesu, TenTec and Elecraft transceivers; I was tempted > to
plug it directly into my K3
> According to the Microham manual this output is provided to be
> connected to Yaesu, TenTec and Elecraft transceivers; I was tempted
> to plug it directly into my K3, but I decided to measure the voltage
> on the Station Master's Inhibit out connector: it's 13V.
Measure the current on the SM I
Marco,
I use a LM7805 voltage regulator to provide inhibit voltage to my K3
(accessory pin-7). Since I use a sequencer it defeats the inhibit
voltage to enable transmit by grounding the voltage regulator thru a
1K current limiting resistor. But the simple voltage divider concept
looks fine
-boun...@mailman.qth.net] On Behalf Of Marco
HB9CAT
Sent: Thursday, August 20, 2015 7:24 AM
To: "Reflector"
Subject: [Elecraft] Microham Station Master Inhibit -> K3 ?
Hello,
I'm optimizing the shack setup and taking a more careful look at hot
switching; Antenna switching is mana
Hello,
I'm optimizing the shack setup and taking a more careful look at hot switching;
Antenna switching is managed through a couple of Microham Station Masters,
which provide an Inhibit Output as cinch connector. So Inhibit will be set
during any Antenna transtition to protect the switches, th
7 matches
Mail list logo
