Re: [Elecraft] New owner with New K3S kit need help?

I plugged the REF IN TMP cable to J4 on the Main KSYN3 board per the diagram on page 15 of the K3EXREF installation and operations manual. The 2 meter frequency is off according to the K3S display and verified being not centered with my P3. If I plug the REF IN TMP cable into J1 on the Main KSYN

Re: [Elecraft] New owner with New K3S kit need help?

Glenn, The K3EXREF manual is dated later.  The other document does not include the K3EXREF and would apply only if the K3XREF were not installed. 73, Don W3FPR On 7/14/2018 12:02 PM, WA7SPY wrote: Hi Don, I understand about the Errata. The confusion is the Errata is for the KXV144 Reference

Re: [Elecraft] New owner with New K3S kit need help?

Hi Don, I understand about the Errata. The confusion is the Errata is for the KXV144 Reference module dated Dec 5 2013 showing placement at J1 on the KSYN3A. The K3EXREF manual is dated August 23, 2016 and shows placement at J4 on the KSYN3A. Hence confusion? Glenn Maclean WA7SPY > On Jul 14,

Re: [Elecraft] New owner with New K3S kit need help?

Glenn, The errata sheets always supersedes the manual - it is the latest update/correction. The designation on the errata title carries the manual designation that is to be corrected. Go to the Documentation download page to be certain you have the latest. 73, Don W3FPR On 7/14/2018 10:41 A

Re: [Elecraft] New owner with New K3S kit need help?

Sorry - spell check strikes again: 2. From J1 on the Main KSYN3A board to REF IN on the K144XV with Reference Oscillator Phase Lock Option installed. John > On Jul 14, 2018, at 10:51 AM, John Stengrevics > wrote: > > Hi Glenn, > > I had problems with this as well. I asked tech support and

Re: [Elecraft] New owner with New K3S kit need help?

Hi Glenn, I had problems with this as well. I asked tech support and they sent an email showing the following correct cable placement: 1. From J2 on KREF3 board to J83 on the Main KSYN3A board. 2. From J1 on the Main KSYN3A board to REF I note K144XV with Reference Oscillator Phase Lock Opt

[Elecraft] New owner with New K3S kit need help?

I have a new K3S kit and P3 kit that I put together. The following options are installed: FL1 - 13khz FM filter FL2 - 2.7 khz filter FL3 - 400 hz filter FL3 - 200 hz filter KPA3A 100 watt PA KAT3A 100 watt Tuner KBPF3A General coverage band pass KTCX03-1 High stability TCXO K144XV internal 2 meter