Subich, W4TV
Sent: Wednesday, August 12, 2015 9:30 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 TX Mon question
As N1AL indicated, the TX MON goes to maximum gain at low signal levels.
You're probably seeing inter station coupling - hopefully at low levels.
Is the SWR very high - all
: [Elecraft] P3 TX Mon question
As N1AL indicated, the TX MON goes to maximum gain at low signal levels.
You're probably seeing inter station coupling - hopefully at low levels.
Is the SWR very high - all reflected?
73,
... Joe, W4TV
On 8/12/2015 9:20 AM, W4CCS wrote:
I have two K3's and two
.
No need to purchase a W2 wattmeter now. Smile and enjoy; life is good.
73 Doug EI2CN
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil
Hystad
Sent: 12 August 2015 16:39
To: Elecraft Reflector
Subject: [Elecraft] P3 TX Mon
or on the LP-100.. Only the
TX Mon.
W4CCS
-Original Message-
From: Joe Subich, W4TV [mailto:li...@subich.com]
Sent: Wednesday, August 12, 2015 10:51 AM
To: W4CCS; Elecraft
Subject: Re: [Elecraft] P3 TX Mon question
Almost certainly inter station coupling particularly if the two
antennas
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Guy
Olinger K2AV
Sent: Wednesday, August 12, 2015 3:46 PM
To: n...@sonic.net
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 TX Mon question
It would appear that the display needs an option
Sold.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-TX-Monitor-For-Sale-tp7606183p7606209.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
My order arrived today and after reviewing the materials, installation took
less than 30 minutes.Installed the Beta firmware and as usual it worked
flawlessly.Thanks again to all the folks at Elecraft.Bill - W0BBI
__
Elecraft mailing
My TX Monitor arrived today. (Got to hate those customs charges).
Installation went smoothly in less than 20 mins and once powered up,
a couple of menu changes and everything
is working perfectly, Tnx to the crew at Elecraft for the TX Monitor
option and the speedy shipping.
73 De Mike
Installed and uninstalled today. Changed my mind on its necessity. $185
shipped. 2K coupler.
Email direct at callsign at arrl.net
NW0M Mitch
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-TX-Monitor-For-Sale-tp7606183.html
Sent from the Elecraft mailing list
I finally decided to install the TX monitor in my P3 today which was the
first time I have used beta firmware. All went fine with the load and the
monitor function works with the following exceptions:
1. dBm level modes end in 9 as noted earlier on this list.
2. The CW Split Screen waveform
The 9 bug will be fixed in the next release.
CW Split is a toggle function. Just select it again to turn it back on.
Alan N1AL
On 08/10/2015 03:10 PM, Roger Gagos wrote:
I finally decided to install the TX monitor in my P3 today which was the
first time I have used beta firmware. All went
Installed the TX monitor as I was building the new P3 adapter. Easy as
others have indicted. After loading all the firmware from the production
side of the Elecraft web site to test initial functionality, I loaded the
Beta code to enable the TX Monitor features. Everything went well ...
having
I got my TX monitor but not installed yet. However, I am surprised that
Beta code is required as noted in the quoted message below. I didn’t
know this. Beta required for a released product?
73, phil, K7PEH
On Aug 8, 2015, at 5:35 PM, Jobst Vandrey jvand...@gmail.com wrote:
….some parts
Phil
The current production release code for the P3 is over a year old - the
Txmonitor function hardware was introduced at Dayton this year and the
first units did not ship till about a week ago so the firmware has not yet
caught up to current. I suspect that between Dayton and version 1.50 of
I just installed the P3 TXMON and all seems well. Aside from the 9
digit anomaly, I notice with ver. 1.50 beta that when either Mkr A or
Mkr B is displayed, and the envelope monitor is enabled, the marker ID
and frequency are superimposed over the transmit envelope display. My
preference, if
Loaded 1.50 per notes given here and see the DBM reading on p3 ending in 9
but on VGA display ending in 0.
Beta loaded without error.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Yes I have also upgraded to 1.50 as I am waiting for the P3TX to arrive and
the dbm scale is now ending in 9 as well.
No SVGA module fitted
73
George GI4SJQ
__
Elecraft mailing list
Home:
Thanks Russell,
We've noted that and it will be fixed in the next release.
73,
Paul n6hz
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-firmware-1-50-displays-dBm-scale-ending-with-9-tp7605866p7605873.html
Sent from the Elecraft mailing list archive at
Hi Stephen,
Try performing a parameter reset (MENU+PWR) and see if that fixes the
problem. You will lose all your function key settings so you might want to
write them down beforehand. Almost all SVGA parameters are saved within the
P3, let me know if the param reset fixes it.
-Paul
--
Yes, same observed here.
73, Tony K4QE
P3/wSVGA #2058
On Mon, Aug 3, 2015 at 9:58 PM, Charles Johnson k4...@icloud.com wrote:
Just received the P3TXMON and installed same. Updated firmware to 1.50.
Now I notice the -dBm scale on the left of the display has the increments
always ending with a
Cc: Dan Maase AC6DM ; Elecraft Reflector
Subject: Re: [Elecraft] P3 - still in trouble with new firmware
Will add my name to list about no NB on SVGA. I didn't know that was
supposed to be working. Additionally bringing up the NB Level menu entry
blue screens the SVGA display and shows Tx/Rx
Let's all not loose sight that this release is a B E T A. There will
be bugs. There will be another release. Feedback regarding issues
found is what the developers want out of this cycle. We are lucky
Elecraft has decided to run a public beta cycle. Typically, beta
releases are released to
Hi Guy,
The issue you are reporting with the SVGA screen going blue and showing the
Rx/Tx window size can happen if you didn't upgrade the SVGA to 1.24 . The
SVGA noise blanker was added in 1.24 . (actually it was put out as a beta
earlier, but we pulled it back to fix some other issues).
Rechecking stuff for Paul at Elecraft. I think the last P3 upgrade I did
was a Send All New Firmware. When I checked just now I had 1.24 SVGA in
the firmware available list but the menu display said I was running 1.16
SVGA. I had loaded 1.50 for the P3. Now rerunning the load firmware, but
using a
@mailman.qth.net
Subject: Re: [Elecraft] P3 - still in trouble with new firmware
Stephen:
Posted this to the wrong thread earlier.
Have you loaded the new SVGA firmware 1.24? You need this as well as the
P3
firmware 1.50 for the SVGA to function correctly.
I've installed both and have not observed
to the P3.
73 Tom
From: Guy Olinger K2AV
Sent: Monday, August 03, 2015 5:39 PM
To: Tom
Cc: Dan Maase AC6DM ; Elecraft Reflector
Subject: Re: [Elecraft] P3 - still in trouble with new firmware
Will add my name to list about no NB on SVGA. I didn't know that was supposed
to be working
Guys:
While I don't really see much benefit from NB, it does seem to work same on
P3 and SVGA.
NB text is upper right corner as expected.
SVGA displays fill below peak level as configured -- no change in behavior
here.
My display resolution is 1024 x 768. Wonder if there is a memory mapping
Just received the P3TXMON and installed same. Updated firmware to 1.50. Now I
notice the -dBm scale on the left of the display has the increments always
ending with a 9. So, I have -79, -99, -119, etc. Previous firmware 1.29 had the
-dBm scale numbers ending with a 0 such as -70, -80, -90, etc.
Yes, same here. Notified Paul Saffren.
73,
Dan
AC6DM
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-firmware-1-50-displays-dBm-scale-ending-with-9-tp7605837p7605842.html
Sent from the Elecraft mailing list archive at Nabble.com.
@mailman.qth.net
Subject: Re: [Elecraft] P3 - still in trouble with new firmware
Stephen:
Posted this to the wrong thread earlier.
Have you loaded the new SVGA firmware 1.24? You need this as well as the P3
firmware 1.50 for the SVGA to function correctly.
I've installed both and have not observed
Hi Paul,
As you might have expected given other recent responses, MENU+PWR reset
produced no cure unfortunately.
73 Stephen, G4SJP
On 3 August 2015 at 16:50, Paul Saffren N6HZ pa...@elecraft.com wrote:
Hi Stephen,
Try performing a parameter reset (MENU+PWR) and see if that fixes the
I wrote too soon,
Having uploaded all firmware to the P3 rather than just the new files, I am
still seeing problems - in particular with the sizing of the SVGA waterfall
not being remembered. Also I have a grey background and lose the fill
under the spectrum line. Toggling the display button on
I also have the exact problem as described by Stephen below. 73, Guy K2AV.
On Monday, August 3, 2015, Stephen Prior eastbrantw...@gmail.com wrote:
I wrote too soon,
Having uploaded all firmware to the P3 rather than just the new files, I am
still seeing problems - in particular with the
Hi Guy,
That's reassuring, no point in me downloading the zipped file again from
the ftp site by the sound of it. I'll await a fix!
Thanks and 73,
Stephen G4SJP
On 3 August 2015 at 10:48, Guy Olinger K2AV k2av@gmail.com wrote:
I also have the exact problem as described by Stephen below.
Stephen:
Posted this to the wrong thread earlier.
Have you loaded the new SVGA firmware 1.24? You need this as well as the P3
firmware 1.50 for the SVGA to function correctly.
I've installed both and have not observed the problems reported.
See Paul Saffren - N6HZ message on FW loading sent
Dale
See, there are limitations to both tracking and fixed modes.
1. Yes, in tracking mode you don’t lose your waterfall - BUT you lose your
averaging when you tune.
2. If you want averaging to stay on all the time - tuning or not, then you can
choose “fixed”, but then the limitation with that
John,
The P3 and PX3 use entirely different interfaces to the radio. The P3 taps into
the K3/K3S 8.2 MHz I.F., while the PX3 uses a baseband I/Q signal from the KX3.
While both methods provide the basic benefits of a panadapter, the P3's
implementation provides higher performance, using more
Received the P3 TXMON option yesterday.. Took about 10 minutes to install
and works flawless.. THANKS Elecraft..!!
The only drawback I see is the lack of the option to set full scale at 1500
watts and not 2000 watts.. Just a personal preference But all is good..
Clyde Scott - W4CCS
/elecraft@mailman.qth.net/msg183823.html
- [Elecraft] P3 vs SDR-IQ
http://www.mail-archive.com/elecraft@mailman.qth.net/msg183784.html
n1ix
-
- Re: [Elecraft] P3 vs SDR-IQ
http://www.mail-archive.com/elecraft@mailman.qth.net/msg183788.html Wes
(N7WS)
- Re
#183822
- Next message
http://www.mail-archive.com/elecraft@mailman.qth.net/msg183823.html
- [Elecraft] P3 vs SDR-IQ
http://www.mail-archive.com/elecraft@mailman.qth.net/msg183784.html
n1ix
-
- Re: [Elecraft] P3 vs SDR-IQ
http://www.mail-archive.com/elecraft@mailman.qth.net
John,
It's true that in Fixed tune mode when you cross the boundary at either
end of the current span, the screen refreshes to the new span and you lose
your waterfall history. But in Tracking mode, don't you lose waterfall
history each time you tune?
Regarding your PX3, have you tried
I agree with Joe. My usage of the P3 and the PX3
is 100% fixed-tune mode, and I find both the P3
and PX3 to work very well for me. They do differ
in amplitude scale in A-B comparisons, but this is
compensated for by scale adjustments.
I've never really found a situation where Tracking
mode
On Fri,7/31/2015 6:08 AM, Joe Word wrote:
1. I am using Tracking mode and have Averaging set at 14. I want to see the
SSB pattern smoothly and not like an O'scope. I always slow the pattern
down to see clearly the transmitted bandwidth and treble/bass balance.
So your primary interest is the
Phil
So….you’re okay using “fixed tune” where your VFO window moves off-centre, and
heads off
towards the edge of the screen - at this point you can’t see whats ahead of you
because you’re
near the edge of the pan adapter. If you go any further, you fall off the edge,
and it plonks you back
It’s difficult to see a station, and find where you are trying to
tune to, when the display loses itsaveraging.
As a long time user of the P3, I strenuously disagree with that
assessment.
73,
... Joe, W4TV
On 2015-07-31 9:57 AM, John Kramer wrote:
Wayne
Apologies, I have never seen a
Wayne
Apologies, I have never seen a P3 in action before, I live too far away from
locations
that have regular hamfests. Maybe I should go and watch some youtube clips.
I just thought the basic architecture in the P3 would be the same as my
PX3.
But, reading your last two paragraphs, tells me
Interesting. I wondered how this worked. My P3TXMON was shipped this week so
ill get to play with it soon, but one would think the scale would be adjustable
so that whatever power is seen, you could make that the full scale. This is
just a scaling issue. Otherwise running the KPA500 with the
the K3 by itself,
the bar display is very low.. However, the digital readout indicates the
correct power.
CCS
From: Dr. William J. Schmidt, II [mailto:b...@wjschmidt.com]
Sent: Friday, July 31, 2015 10:50 AM
To: W4CCS
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 TX mon
On Jul 31, 2015, at 9:51 AM, Jim Brown j...@audiosystemsgroup.com wrote:
What you want is not possible -- Averaging is working on the IF signal. We
can choose to always center it, or tune across it. When we tune in Tracking
Mode, it MUST begin averaging again.
Not quite impossible.
It
Eric
Thanks for that info, I would like to try that out - I must have missed that in
the manual….unless it was
incorporated in the new firmware, and I didn’t see it in the release notes.
Thanks for the heads up
73
John, ZS5J
On 31 Jul 2015, at 9:20 PM, Eric Swartz - WA6HHQ, Elecraft
Hello John,
Phil
Soâ¦.youâre okay using âfixed tuneâ where your VFO window moves
off-centre, and heads off
towards the edge of the screen - at this point you canât see whats ahead
of you because youâre
near the edge of the pan adapter. If you go any further, you fall off the
One minor note: There are three different P3 and PX3 fix mode tuning defaults
you can select in the menu for when you tune past the edge of the display:
slide, 1/2 screen and full screen jump.
I generally prefer the slide mode as it is less jarring and drags the window
incrementally in the
I think I know what Joe is getting at….and I agree with him, if I understand
him correctly. When he refers to “noise floor”
he means that he loses averaging when he tunes, resulting in the crazy spectrum
display (what Joe refers to as noise).
I haven’t seen or used a P3, but I bought my first
I would be interested in comments from Elecraft as to why the KX3/P3 differ
from
the products you list in the way averaging is handled.
73
Stewart G3RXQ
On Fri, 31 Jul 2015 10:13:25 +0200, John Kramer wrote:
I think I know what Joe is getting atand I agree with him, if I
understand
him
Has anyone compared the SDR-IQ as a panadapter with the P3?
I am using the SDR-IQ now but would like to be able to use my entire
computer screen for other displays during contests.
Dave N1IX
__
Elecraft mailing list
I have seen a couple in operation but do not personally own a P3. I do use an
SDR-IQ running SpectraVue on my K3 and have a second one to use with my new K3S
when it gets back from Elecraft rehab:-(
To me the P3 display is just too small. Apparently, many agree, hence the VGA
adapter. So
In my case my use of the panadapter in a contest is for
A. Finding a run frequency
B. Observing above and below when experiencing interference, plus A above
in deciding whether to get a different run frequency.
C. Catching all the active frequencies when search and pounce
None of these require
Yes, I have both. The SDR-IQ with SpectraVue remains off 95%
of the time while I use the P3 (without SVGA) for everything
else.
The P3 does not provide a second receiver (but I have the KRX3)
or the ability to QSY by clicking a mouse on the screen but I
haven't missed that capability.
The P3
Hi Joe - Do you have signal averaging turned on to reduce the noise floor? If
you do, it has to stop averaging when the freq is being changed while tuning,
temporarily raising the noise floor slightly. It then re-starts multi-pass
averaging once you stop tuning. This is normal for signal
.
73, Charlie k3ICH
-Original Message-
From: Elecraft
[mailto:elecraft-boun...@mailman.qth.net] On
Behalf Of Phil Wheeler
Sent: Thursday, July 30, 2015 9:06 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 vs SDR-IQ
I've seen nothing like that here, Joe, in well
over a year
I've seen nothing like that here, Joe, in well
over a year of using the K3-P3 combo.
Something is amiss in your setup. Be sure to check
all cables since that is a common problem.
73, Phil W7OX
On 7/30/15 5:43 PM, Joe Word wrote:
I have been using a P3 with my K3 for the last two weeks and
It seems like it would be possible to keep the averages for the old part of the
spectrum and only start fresh in the new part. It would look odd for a bit, but
it would be great for the portion that was not disrupted.
wunder
K6WRU
CM87wj
http://observer.wunderwood.org/ (my blog)
On Jul 30,
I have been using a P3 with my K3 for the last two weeks and not happy with it's
operation. I set the parameters to what I like, the patterns look
good, but when
I tune the screen fills with noise and you can not see the signals up
and down the band.
I am told the SVGA option does the same thing.
On Thu,7/30/2015 5:43 PM, Joe Word wrote:
I have been using a P3 with my K3 for the last two weeks and not happy with
it's operation. I set the parameters to what I like, the patterns look good,
but when I tune the screen fills with noise and you can not see the signals up
and down the band.
Joe - I use Fixed Tune mode because I just like that display the best -
BUT I just checked Tracking Mode and I see about a half S unit noise when
I tune - I do not see any in Fixed Tune . UNLESS I look with the K3 on a
dummy load so no external antenna noise at all. Its visible there but
Joe,
Are you by some chance using your P3 with the FixTrack mode set to
Tracking mode rather than Fixed-tune mode? If so, WHY??? ;-)
I used PowerSDR with a FLEX-5000A for years and always hated that it ONLY
supported what Elecraft refers to as Tracking mode. Eventually, as
PowerSDR was
New BETA firmware for the P3/SVGA is available for download from HERE
ftp://ftp.elecraft.com/P3/firmware/beta/P3-0150_SVGA-0124BETA.zip
This release includes support for the new Elecraft P3TXMON accessory board.
Please refer to the P3/SVGA Manual Rev E
When will the update to the P3 firmware to support the TX Monitor function
be available?
Jobst
AC0LP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On 07/27/2015 10:46 PM, Jim Brown wrote:
On Mon,7/27/2015 10:28 PM, Phil Wheeler wrote:
Oh oh, Jim: We need a P3A :-) Good you took this on.
Perhaps P3 firmware can be re-written to allow display of greater
dynamic range to the extent that electronics headroom supports it?
The limit is the
On 07/28/2015 07:38 AM, Alan Bloom wrote:
The limit is the 32-bit arithmetic in the DSP firmware. 32 bits gives
you 96 dB less some headroom to allow for the averaging function.
I should clarify that these are calculations that are done after the
conversion from voltage to power, so you
On Tue,7/28/2015 7:38 AM, Alan Bloom wrote:
On 07/27/2015 10:46 PM, Jim Brown wrote:
On Mon,7/27/2015 10:28 PM, Phil Wheeler wrote:
Oh oh, Jim: We need a P3A :-) Good you took this on.
Perhaps P3 firmware can be re-written to allow display of greater
dynamic range to the extent that
On Mon,7/27/2015 10:28 PM, Phil Wheeler wrote:
Oh oh, Jim: We need a P3A :-) Good you took this on.
Perhaps P3 firmware can be re-written to allow display of greater
dynamic range to the extent that electronics headroom supports it?
73, Jim K9YC
Just wondering if anyone received their P3TXMON as yet.Bill-W0BBI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Not yet. Hopefully, they will start shipping this week.
73,
Bob Nobis - N7RJN
n7...@nobis.net
On Jul 27, 2015, at 05:43, Bill Wiehe via Elecraft elecraft@mailman.qth.net
wrote:
Just wondering if anyone received their P3TXMON as yet.Bill-W0BBI
I finally got around to repeating a few measurements using with the new
K3SYNA boards. I've added the results near the beginning of
P3_Spectrum_Measurements.pdf
There's also a measurement of an un-keyed, unmodulated carrier.
Executive summary -- the screen of the P3 can display only 80 dB of
Oh oh, Jim: We need a P3A :-) Good you took this on.
73, Phil W7OX
On 7/27/15 10:05 PM, Jim Brown wrote:
I finally got around to repeating a few
measurements using with the new K3SYNA boards.
I've added the results near the beginning of
P3_Spectrum_Measurements.pdf
There's also a
Will Elecraft going release a new firmware for P3 for the TX monitor?
--
George Rebong
KE6TE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On 07/17/2015 07:08 AM, George Rebong wrote:
Will Elecraft going release a new firmware for P3 for the TX monitor?
Yes. We've gone through several rounds of alpha testing. Assuming
the latest version (01.44) looks good we should shortly be releasing it
for beta test.
In addition to the
Webpage says Shipping Approximately July 24th.
This is the third date published.
W4CCS
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Nr4c
Sent: Wednesday, July 15, 2015 3:42 PM
To: elecraft
Subject: [Elecraft] P3 TX Module
Has anyone heard from
Has anyone heard from this option as yet?
Sent from my iPhone
...nr4c. bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
/15/2015 12:46 PM, W4CCS wrote:
Webpage says Shipping Approximately July 24th.
This is the third date published.
W4CCS
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Nr4c
Sent: Wednesday, July 15, 2015 3:42 PM
To: elecraft
Subject: [Elecraft] P3 TX
Hello
Is there now, or will there soon be, a video of this unit in operation?
Thanks
Steve KZ1X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
in a window on my PC and move it around
From: Amateur Radio Operator N5GE n...@n5ge.com
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Thursday, June 18, 2015 12:28 PM
Subject: [Elecraft] P3
I thought the P3 would output 1920 x1080, but I can find no setting
for the P3 resolution
I thought the P3 would output 1920 x1080, but I can find no setting
for the P3 resolution.
But then again I may be wrong. :-)
Amateur Radio Operator
N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
:28 PM
Subject: [Elecraft] P3
I thought the P3 would output 1920 x1080, but I can find no setting
for the P3 resolution.
But then again I may be wrong. :-)
Amateur Radio Operator
N5GE
__
Elecraft mailing list
Home: http
I wouldn't want to start a huge ruckus, but I would love to be able to
show off the P3 transmit monitor for Field Dayjust saying.
73 de
K2QY
John
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Maybe next year, John.
Phil W7OX
On 6/10/15 4:59 AM, John Fritze wrote:
I wouldn't want to start a huge ruckus, but I would love to be able to
show off the P3 transmit monitor for Field Dayjust saying.
73 de
K2QY
John
__
Elecraft P3 Panadapter (serial #888) with P3-SVGA for large screen monitor FOR
SALE,
Lightly used. $750 shipped CONUS - new this would cost $980 plus shipping.
Contact direct, please.
73,
H. Cary, K4TM
Lynchburg VA
Sent from my iPad
Would there be any support for a P3 option to display the VFO cursors in
the waterfall area? The WF is mainly what I watch, I can see signals
there that I'd never find in the spectrum display [and sometimes can't
hear either :-)]. Admittedly mainly in contests, I will find a trace in
the WF
Sounds like a great idea. That would be a great aid for teaching on the GOTA
station.
73, Fred, AE6QL
-Original Message-
From: Fred Jensen k6...@foothill.net
Sent: May 30, 2015 8:09 PM
To: Elecraft Reflector elecraft@mailman.qth.net
Subject: [Elecraft] P3: VFO Cursors in WF
Would
I was doing some power line noise tracking with my AM VHF radio and brought it
into the shack and laid it on the desk with no antenna and started receiving a
loud buzz from it. The tracker radio was tuned in the 135 Mhz area. I moved
it around to all the suspects like computer monitors, TV,
Yes, mine does it as well. I was using an Icom IC-91A HT on 135Mhz AM (with
rubber duck antenna) and as I moved the HT away from the P3, the noise
diminished into the normal noise level at a distance of about 2 feet. Seems to
be strongest directly in front of the display. Even to the sides of
-- Original Message --
From: Harry Yingst via Elecraft elecraft@mailman.qth.net
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: 5/22/2015 12:05:00 PM
Subject: [Elecraft] P3 TX Monitor, and KBPF3 Mod Kit Shipping date?
Is there an estimate for the P3 TX Monitor, and KBPF3 Mod Kit
Shipping
Roy,
The short answer is NO. The modulation envelope display is good for
displaying any clipping, but it will not show you the frequency
response. If you have seen the modulation envelope of an SSB signal on
an oscilloscope, that is what you can expect, it shows relative
amplitude and any
That would be the best option, I hope that is the way it works!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Based on recently installing an SVGA card, I
suspect it will be pretty easy.
Phil W7OX
On 4/20/15 9:16 PM, David Cole wrote:
I wonder how difficult the install will be.
__
Elecraft mailing list
Home:
This would be a big deal for me because of the insane cost of shipping
anything bigger than an envelope to Israel.
On 20 Apr 2015 20:38, Wayne Burdick wrote:
It may be possible to modify W2 sensors for use with the P3. We'll
let you know when we get closer to releasing the product.
73, Wayne
On 2015-04-20 10:06 AM, Ian - Ham wrote:
I would hope this comes in a firmware upgrade, not a for-fee add-on.
There is most certainly a hardware add-on involved. Wayne has already
said there was an external sensor (similar to the sensor in the W2)
plus a small board to connect into the P3.
I
Hi Jim,
I am running the 1.35/1.22 firmware but I haven't tried the NB feature. My
interest was in the SVGA hang-up going from transmit to receive. In that
regard this version is 90% better than 1.29. It still experiences the
hang-up occasionally. Other than that I have not experienced any bugs.
I can't seem to find the latest beta firmware for the P3 - I downloaded the
1.21/1.34 version (NB on SVGA) but didn't download the 1.22/1.35 version
when it came out. I don't see it in the P3/beta firmware directory now -
what happened or what am I doing wrong?
Jim KS7S
1201 - 1300 of 4853 matches
Mail list logo