You can make a macro that toggles, my PF1 goes to split and up 5, sub
receiver, hitting it again goes back to
normal.. saves PF2 for another use.
Merv K9FD/KH6
H ... that seems like a whole lot of effort to work an other wise
user-friendly radio/panadapter, but to each his own. I can s
Gary Smith-2 wrote
> How about the software engineers at Elecraft making that an option in
> the next firmware update. You don't like it, don't use it. You do
> like it, then you can use it. To me it makes all the sense in the
> world.
Gary,
If you don't want the sub-receiver engaged, then tak
der transceivers with
a very inferior 2nd RX... but it still seems to make good sense today.
73 from Ian GM3SEK
-Original Message-
From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
boun...@mailman.qth.net] On Behalf Of Vic Rosenthal K2VCO
Sent: 19 March 2014 14:26
To: elecraft@ma
I have my priorities, you have yours.
Out
Gary
KA1J
>
> > How about the software engineers at Elecraft making that an option in
> > the next firmware update. You don't like it, don't use it. You do
> > like it, then you can use it. To me it makes all the sense in the
> > world.
>
> I can t
> How about the software engineers at Elecraft making that an option in
> the next firmware update. You don't like it, don't use it. You do
> like it, then you can use it. To me it makes all the sense in the
> world.
I can think of a lot more important things for the software engineer
(N1AL) on
Hi Joe & others who kindly replied,
What I expect and what I see as efficient may be an "abnormal action"
to another person but to me it is incredibly efficient and doing it
otherwise is making work and is to me an abnormal action.
What I want is engage split when I engage Magenta MKR 2, not t
H ... that seems like a whole lot of effort to work an other wise
user-friendly radio/panadapter, but to each his own. I can spot DX in a
heartbeat from the pileup on the P3 and of course, just below the pile
will be the UP Cops and [hopefully], the DX under them. I finally built
a PF1 ma
net] On Behalf Of Vic Rosenthal K2VCO
>Sent: 19 March 2014 14:26
>To: elecraft@mailman.qth.net
>Subject: Re: [Elecraft] P3 & marker B transmit freq.
>
>This is what I've learned to do. The only problem is that once you
enter
>this mode, if you want to fool with selectivity,
Gary,
If you are willing to push a different button than MKRB, you can modify your
DX split procedure by using the PF1 and PF2 buttons to execute a macro that
puts turns the sub-receiver on, copies VFO settings from A to B to make sure
they are on the same band and consistent, sets VFO B to be the
Hi Gary,
I understand your need and as others have indicated it's not really how most
folks use markers. My findings have been that the markers are not optimum
for split DX chasing.
When DX is operating split I immediately hold the SPLIT button and turn on
the SUB RX and then spin the VFO B knob
What I was expecting as an built-in option though would be beneficial
for anyone who operates as I do.
That's not how it was designed to work. Enabling split anytime Marker B
was tapped would be disruptive to most users.
In the vast majority of cases setting/tapping Marker B says "this is an
This is what I've learned to do. The only problem is that once you enter
this mode, if you want to fool with selectivity, APF, shift, etc. to
hear the DX better, you must press BSET first.
On 3/19/2014 6:42 AM, Peter Wollan wrote:
Another thought how about putting the magenta marker on th
Sam,
No, I've never made a macro, no idea how I'd approach that to
accomplish this. If it would work I'd be willing to try. What I was
expecting as an built-in option though would be beneficial for anyone
who operates as I do.
Gary
KA1J
> just a thought
> how about creating a macro that d
Hi Peter,
There are several ways to do what for me are work-arounds but all
require doing several things to accomplish what to me should be a one
step operation, leave out a step & I hear the cops yelling UP LID or
worse only to see the QSY did not engage transmit and I was
transmitting on the
Another thought how about putting the magenta marker on the DX
transmit frequency, and roam up with the A green main knob? And leave
split off.
Peter W0LLN
On Wed, Mar 19, 2014 at 8:35 AM, Sam Morgan wrote:
> just a thought
> how about creating a macro that does what you want...
just a thought
how about creating a macro that does what you want...?
On 3/19/2014 9:31 AM, Gary Smith wrote:
Bill,
Understood that some only use it that way, that is not my norm
though. I chase DX and If I engage the magenta operation with the P3,
its to be transmitting on a DX's listening
Bill,
Understood that some only use it that way, that is not my norm
though. I chase DX and If I engage the magenta operation with the P3,
its to be transmitting on a DX's listening frequency and in all those
cases I will be split.
Since 1979 I've never listened on two bands simultaneously and
No, not intuitive.
MKR B is the VFO B frequency. Often one wants to listen on the B frequency.
It may be on another band.
SPLIT is a special case, not the norm.
...bill nr4c
Sent from my Verizon Wireless 4G LTE DROID
Gary Smith wrote:
>Reading the P3 screen I see a station transmitting. I
Hello Dick,
That could be done but I would have to manually turn the sub Rx on to
do this, if I am to hear both. Hearing is not mandatory but it is an
asset. And more, it is somewhat disconcerting to use P3 marker A to
affect the K3's VFO "B" receiver and, P3 marker B with the K3s VFO
"A" rec
Reading the P3 screen I see a station transmitting. I use Marker A
(Green) to pin me on that desired station as soon as I tap the knob
to QSY me to a desired signal.
I listen to the station and they say UP so I know to hold in the MKR
button to activate B ((Magenta) I see where the last transmi
20 matches
Mail list logo