No, I always power OFF using the K3S Power Switch.
Regards,
Danny Higgins
From: Nr4c
Sent: 23 May 2016 18:58
To: danny.higgins
Cc: Don Wilhelm; Vic Rosenthal 4X6GP/K2VCO; elecraft@mailman.qth.net
Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile?
Are you using the Power switch
73 Gene, N9TF
K3S 10057
- Original Message -
From: "Gary Smith" <g...@ka1j.com>
To: "elecraft" <Elecraft@mailman.qth.net>
Sent: Monday, May 23, 2016 1:57:55 PM
Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile?
I just checked on my K3s and
y.higgins'" <danny.higg...@keme.co.uk>;
> elecraft@mailman.qth.net
> Sent: 5/23/2016 7:17:03 AM
> Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile?
>
> >Same thing happens here with K3S SN 10057. I have no digital SW running
> >or rig control at the time of po
TT-KEY
> after a power cycle – it always goes back to OFF-OFF. The same thing happens
> in USB or DATA modes.
>
> Danny, G3XVR
>
> From: Don Wilhelm
> Sent: 23 May 2016 06:26
> To: danny.higgins; Vic Rosenthal 4X6GP/K2VCO; elecraft@mailman.qth.net
> Subject: Re:
Yes, running in UNSAFE mode remembers the PTT-KEY setting.
Danny, G3XVR
From: Gene Gabry
Sent: 23 May 2016 13:30
To: 'danny.higgins'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] PTT KEY CONFIG setting volatile?
Check the updates to latest firmware version. There is a safe mode and Unsafe
there is still
something not quite right with the keying logic yet.
Danny, G3XVR
From: Gene Gabry
Sent: 23 May 2016 13:17
To: 'danny.higgins'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] PTT KEY CONFIG setting volatile?
Same thing happens here with K3S SN 10057. I have no digital SW running
Message --
From: "Gene Gabry" <n...@comcast.net>
To: "'danny.higgins'" <danny.higg...@keme.co.uk>;
elecraft@mailman.qth.net
Sent: 5/23/2016 7:17:03 AM
Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile?
Same thing happens here with K3S SN 10057. I have no di
s'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile?
Same thing happens here with K3S SN 10057. I have no digital SW running or rig
control at the time of power down. If I set PTT to DTR and power down for some
period of time, PTT defaults back to OFF when power up. Al
/K2VCO; elecraft@mailman.qth.net
Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile?
WSJT not running – K3S not connected to PC. I still need to reset PTT-KEY
after a power cycle – it always goes back to OFF-OFF. The same thing happens
in USB or DATA modes.
Danny, G3XVR
From: Don Wilhelm
Sent
@mailman.qth.net
Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile?
Danny,
Do a test without WSJT running. Set PTT key config to DTR - OFF, then
cycle power on the K3S. Does that setting survive the power cycle? If
so, it is not a K3S problem, look to the WSJT software for the solution
4X6GP/K2VCO
Sent: 23 May 2016 04:29
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile?
Which radio is it? I've never seen this on my K3.
If you are running some kind of rig control software, try it with the
software not running.
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
@mailman.qth.net
Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile?
Which radio is it? I've never seen this on my K3.
If you are running some kind of rig control software, try it with the
software not running.
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/
On 23 May 2016 05:51
com>
Sent: Sunday, May 22, 2016 4:23 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] PTT KEY CONFIG setting volatile?
I notice the PTT KEY selection under CONFIG doesn't appear to be
non-volatile as when the radio is power cycled, it always reverts to
OFF - OFF. I'd like it to stay set t
behalf of Ken
Arck <k...@arcomcontrollers.com>
Sent: Sunday, May 22, 2016 4:23 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] PTT KEY CONFIG setting volatile?
I notice the PTT KEY selection under CONFIG doesn't appear to be
non-volatile as when the radio is power cycled, it always re
.net
Subject: [Elecraft] PTT KEY CONFIG setting volatile?
I notice the PTT KEY selection under CONFIG doesn't appear to be
non-volatile as when the radio is power cycled, it always reverts to
OFF - OFF. I'd like it to stay set to DTR -- RTS but it doesn't
Even if I leave 13.8 to the radio, tu
I notice the PTT KEY selection under CONFIG doesn't appear to be
non-volatile as when the radio is power cycled, it always reverts to
OFF - OFF. I'd like it to stay set to DTR -- RTS but it doesn't
Even if I leave 13.8 to the radio, turning it OFF and back ON and
that setting reverts.
16 matches
Mail list logo
