[Elecraft] Thanks to all for many great suggestions about a PTT Switch

Following Kevin Stover’s and Don Wilhelm’s advice – a normally open push button mounted in a film can or in a Sharpie cap respectively -- I have settled on fitting a button switch into a tennis ball . . . . If I drop it, it might come right back With their usual

Re: [Elecraft] Thanks for all the portable operation photos so far

Jim K8MR -Original Message- From: Eric Swartz - WA6HHQ, Elecraft <e...@elecraft.com> To: Wayne Burdick <n...@elecraft.com> Cc: Elecraft Reflector <elecraft@mailman.qth.net>; KX3 <k...@yahoogroups.com> Sent: Fri, Sep 1, 2017 7:28 am Subject: Re: [Elecraft] Thanks for all th

Re: [Elecraft] Thanks for all the portable operation photos so far

Wayne, These should be forwarded to Margaret and me for our promo use. Eric elecraft.com _..._ > On Aug 29, 2017, at 2:50 PM, Wayne Burdick wrote: > > I’ve received so many great photos already that I won’t be able to thank > everyone personally. But keep ‘em coming. >

[Elecraft] Thanks for all the portable operation photos so far

I’ve received so many great photos already that I won’t be able to thank everyone personally. But keep ‘em coming. Clearly some folks had a lot more fun than I did this summer. 73, Wayne N6KR > On Aug 29, 2017, at 9:22 AM, Wayne Burdick wrote: > > Hi all, > > We’re

Re: [Elecraft] Thanks to all

On 9/10/2016 7:12 PM, Louis Ives wrote: I have also found that to connect to the K3 utility the K3 must be powered up. Yes, just like any other application using RS232/USB to communicate with the rig. The manual stated that it should connect to the utility regardless if it is powered up or

Re: [Elecraft] Thanks to all

What baud rate is K3 set to? Should be USB if using the USB to USB cable. I don't think the computer will connect to the radio if radio is not ON. You do not use a KUSB with the KIO3B upgrade. You should also get the new P3 "Y" cable to connect the P3 to the K3. Sent from my iPhone

Re: [Elecraft] Thanks to all

Louis, Do you have the menu RS-232 set to USB? It should be to use the USB connection - see page 63 of the K3S manual. HF-TRN and TRN refer only to the band encoding - see page 21 of the K3S manual. The computer may recognize the K3 USB to serial converter with power off the K3, but

[Elecraft] Thanks to all

I would like to thank everybody that responded to my questions about upgrading my K-3. All of the upgrades went without a problem, due in large part to the advise given. Everything works but I have a strange working K103B. The only way it will connect to the K3 utility page is to connect my

[Elecraft] Thanks for all the feedback regarding Winlink & K3.

Folks, I appreciate all the feedback that I have received. I am now able to link up to Winlink stations reliably with my K3 and my SCS DR-7400. 73, Tony L. (KJ5XF) __ Elecraft mailing list Home:

[Elecraft] Thanks to all

Just a note to thank everyone not only for their responses to my pathetic plea :) but also for all the information I have picked up just reading these threads. Fyi I did fire it up today & it only took me 15 minutes to realize the paddle plug does not go in the key socket :( I did some 'off

[Elecraft] Thanks for all info

I would like to thank everyone for all the information about K3 repair and shipping time to Elecraft.73 Dave...NK8A __ Elecraft mailing list Home:

[Elecraft] Thanks for all the help!!!

I wanted to thank everyone who responded with help for connecting a Kenwood MC-60 with a boom to my K3. Once again many thanks!!! Mark Griffin, KB3Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Thanks to all

Thanks to all who replied to my queries about messages not appearing. This one should be in plain text and should appear. Thanks also to those who replied off list and answered my original query. John, VE1JS __ Elecraft mailing list

Re: [Elecraft] Thanks to all

* On 2012 13 Dec 17:30 -0600, John Scott wrote: Thanks to all who replied to my queries about messages not appearing. This one should be in plain text and should appear. Thanks also to those who replied off list and answered my original query. Looks good here! 73, de Nate, N0NB -- The

[Elecraft] Thanks to all who replied - KPA500 - 500W out on 120VAC?

Thanks to all who replied on my question about using a KPA500 on 120. The input is appreciated. Zack N8FNR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] Thanks for all the replies on the width!

Philip LaMarche LaMarche Enterprises, Inc mailto:p...@lamarcheenterprises.com p...@lamarcheenterprises.com http://www.lamarcheenterprises.com/ www.LaMarcheEnterprises.com 727-944-3226 727-937-8834 Fax 727-510-5038 Cell http://www.w9dvm.com/ www.w9dvm.com K3 # 1605

[Elecraft] Thanks to all!!

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

[Elecraft] Thanks to all re: stiffner and usb cable

Ordered a pair of synth stiffeners and a updated USB cable from Madelline at Elecraft a few minutes ago. Thanks to all jim ab3cv __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Thanks to all of you.

Dave has it hands down. His cases look very nice and appear to be of high quality. He contacted me directly, and I am waiting for the case. 73 Alan W1HYV _ Windows Live: Keep your friends up to date with what you do online.

Re: [Elecraft] Thanks to all of you.

You will not be disappointed :-) 73 de M0XDF, K3 #174 -- I believe I found the missing link between animal and civilized man. It is us. -Konrad Lorenz, ethologist, Nobel laureate (1903-1989) On 21 Aug 2009, at 23:27, Alan Price wrote: Dave has it hands down. His cases look very nice and

[Elecraft] thanks to all!

thanks to all who postsed info on the anti-static mats. located one at radio shack!! thanks again !! i have been reading on the reflector here for a while. what a wealth of knowledge and help! i think i will enjoy radio once again i am looking forward to trying some of the digital modes out.

[Elecraft] Thanks to all on the List

Hi to the List, I must say a big thank you to the you all for the advice particularly over the last week. I have now sorted the problem of R116 by using a 5.6 M Ohm resister. I have also now completed the Stage 2 Alignment. It's very nice to hear signals of all sorts on 40m. Now onto the PA

[Elecraft] Thanks to all

K1-4, KAT1 serial 2269 is now complete and calibrated. This would have been a lot more difficult without the great people on this forum and great support from Gary at Elecraft. I hooked up a 100' wire stretched across a couple of low trees to see how the KAT1 tunes up. 3.6 to 1 on 40m 2.6

[Elecraft] Thanks to all who helped!

Hello everyone, I just wanted to quickly send out a very big THANK YOU to all who responded to my BL2 antenna question. The insight and help I got from various people across the US was WONDERFUL! I am really glad this forum exists for us Elecraft enthusiasts. A quick follow up: I did

Re: [Elecraft] thanks for all the KX1 photos....

On September 25, 2006 05:37 pm, wayne burdick wrote: I can see that I'm spending too much time in the lab and not enough out on the trail :) You just had time away from the lab in San Diego. Back to work! We need more kits to build. ;-) Just kidding. We all appreciate the huge amount of

[Elecraft] Thanks to all! was:blank display

Just wanted to send a note of thanks to the many responses for help to me. I will try some more of these new suggestions and also have a couple of offers for personal assistance. I think I'm on the right path now no matter what. I'm slow because of my work schedule and off times I watch our