Don,
I confirmed the correct com port is com3.
Mark
WU6R
> On Jun 2, 2018, at 3:53 PM, Don Wilhelm wrote:
>
> Mark,
>
> Are you using the USB interface on the K3S, or a USB to serial adapter to
> connect to the K3?
>
> If that is the case, did the assigned COM port get changed with the Win
Don,
I am using the USB cable that is USB to USB from my pc to the USB connection on
the back corner of the K3.
Mark
> On Jun 2, 2018, at 3:53 PM, Don Wilhelm wrote:
>
> Mark,
>
> Are you using the USB interface on the K3S, or a USB to serial adapter to
> connect to the K3?
>
> If that is
Mark,
Are you using the USB interface on the K3S, or a USB to serial adapter
to connect to the K3?
If that is the case, did the assigned COM port get changed with the
Windows 10 Update? Some have reported it has happened to them.
To check the COM port that is assigned, open Device Manager
What I meant was, can you use some other program besides K3 Utility, like
Hyperterm, etc. (a simple terminal server) to communicate with the K3? An
updated terminal utility may have been included with your new OS.
Wayne
> On Jun 2, 2018, at 12:10 PM, Mark Wheeler wrote:
>
> Wayne,
>
> No I c
Wayne,
No I cannot. The command tester tab and terminal tab are grayed out.
Mark
WU6R
Sent from my iPad
> On May 30, 2018, at 11:40 PM, Wayne Burdick wrote:
>
> Can you communicate with the K3 using a simple terminal server? E.g., send
> “FA;” and see if you get the VFO A frequency in respo
Another issue to check once you get your USB sound going. Windows Sound
> Recording > Advanced - make sure you have a 2 channel device
format. Mine was 1 channel (mono) when I reinstalled the drivers.
Rich
K3RWN
__
Elecraft mailing
Can you communicate with the K3 using a simple terminal server? E.g., send
“FA;” and see if you get the VFO A frequency in response.
That would demonstrate that the port and driver are working.
Wayne
http://www.elecraft.com
> On May 30, 2018, at 4:48 PM, Mark Wheeler wrote:
>
> Wayne
Wayne,
Yes, I confirmed the USB port does function with my external DVD-ROM drive. I
reinstalled my RT Systems software for my Icom IC-5100A. It worked without a
hitch.
Mark
WU6R
> On May 28, 2018, at 7:25 PM, Wayne Burdick wrote:
>
> Not so sure. For example, see:
>
>
> https://www.wi
Autery
*Sent:* Tuesday, May 29, 2018 6:42:03 PM
*To:* elecraft@mailman.qth.net
*Subject:* Re: [Elecraft] Windows 10 Update Breaks COM Port for K3 &
P3 Utilities
This is such a cluster and should never have happened... when I can
break loose, I will see what I can do to repriduce this situa
great day,
Bill J
From: elecraft-boun...@mailman.qth.net on
behalf of Clay Autery
Sent: Tuesday, May 29, 2018 6:42:03 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities
This is such a cluster and sho
: Tom , Mark Wheeler
, elecraft@mailman.qth.net Cc: Mark Wheeler
Subject: Re: [Elecraft] Windows 10 Update Breaks COM Port
for K3 &
P3 Utilities
Tom, I get prereleases for WIN 10 Pro which means I got the release you are
probably discussing in this thread some time ago. The a
-Original Message-
From: Mark Wheeler
Sent: Sunday, May 27, 2018 10:29 AM
To: elecraft@mailman.qth.net
Cc: Mark Wheeler
Subject: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities
With the latest Windows 10 update earlier this week, my K3S and P3 can no
lo
lecraft uses. Make
> sure it is set to allow.
> 73 Tom
> va2fsq.com
>
>
>
>
> -Original Message- From: Mark Wheeler
> Sent: Sunday, May 27, 2018 10:29 AM
> To: elecraft@mailman.qth.net
> Cc: Mark Wheeler
> Subject: [Elecraft] Windows 10 Update Breaks COM Por
set to allow.
73 Tom
va2fsq.com
-Original Message-
From: Mark Wheeler
Sent: Sunday, May 27, 2018 10:29 AM
To: elecraft@mailman.qth.net
Cc: Mark Wheeler
Subject: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities
With the latest Windows 10 update earlier this week, my
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
Sent: Monday, May 28, 2018 4:33 PM
To: Mark Wheeler
Cc: Elecraft Reflector
Subject: Re: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities
Mark,
This, too, appears relevant:
h
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
Sent: Monday, May 28, 2018 4:33 PM
To: Mark Wheeler
Cc: Elecraft Reflector
Subject: Re: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities
Mark,
This,
Mark,
This, too, appears relevant:
https://www.silabs.com/community/interface/forum.topic.html/cp210x_driver_v101-91Gl
It specifically mentions amateur radio gear, though it’s specific to SiLabs
parts. I’m not sure off the top of my head whether it applies to the USB
hubs/codecs we use.
Not so sure. For example, see:
https://www.windows10forums.com/threads/com-ports-since-last-april-update-faulty.16976/
If I find anything more relevant I’ll let you know.
Meanwhile, can you confirm that your PC’s COM ports still work with other
devices, and that the K3/P3 still work with t
Wayne,
There were tons of problems listed associated with the latest windows 10
update, but none were COM port issues. The search for a solution continues...
Thanks.
Mark
WU6R
On May 27, 2018, at 06:43 AM, Wayne Burdick wrote:
Try this:
https://www.ghacks.net/2018/05/01/all-the-issues-of
Clay,
I tried the fix below and my COM port connection still does not work.
Mark
WU6R
On May 27, 2018, at 07:59 AM, Clay Autery wrote:
A similar problem has happened to VNWA users on Windows 10 upgrades. USB Vodecs are
still in the registry, but Win10 upgrade set them to "DISABLED".
You s
Bob,
I tried the fix below and it did not work...
Mark
WU6R
Mark..If you use google type in.. pl2303_64bit_installer.. then go down to..
Prolific usb to serial fix official solution to code 10 error...
73s Bob W5RG
On Sunday, May 27, 2018, 11:08:08 AM CDT, Mark Wheeler
wrote:
Bob,
else can help, or maybe Google is
your friend. :-)
73,
Alan. G4GNX
-Original Message- From: Mark Wheeler
Sent: Sunday, May 27, 2018 3:29 PM
To: elecraft@mailman.qth.net
Cc: Mark Wheeler
Subject: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3
Utilities
With the latest W
riend.
:-)
73,
Alan. G4GNX
-Original Message-
From: Mark Wheeler
Sent: Sunday, May 27, 2018 3:29 PM
To: elecraft@mailman.qth.net
Cc: Mark Wheeler
Subject: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities
With the latest Windows 10 update earlier this week, my K3S a
With the latest Windows 10 update earlier this week, my K3S and P3 can no
longer communicate with my Windows 10 PC via the USB cables. I’ve gone into
Device Manager and right clicked on the COM12 device drive and clicked “update
driver” and that updated from a 2016 driver to a 2017 CM port driv
24 matches
Mail list logo
