Thank you all..
We are fixed again :)
Larry k6ro
-Original Message-
From: Carl
Sent: Sunday, June 20, 2021 7:06 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware Update Failure ?
Look in the utility "help" tab. it tells you how to recover from this.
Carl
Look in the utility "help" tab. it tells you how to recover from this.
Carl
AB1DD
On 6/20/2021 9:11 PM, Larry Shapiro wrote:
Happy Father's day all !
I was updating the firmware today on a good working K3.
I have done this many times without any issues.
This time,while it was updating to 5.67
Happy Father's day all !
I was updating the firmware today on a good working K3.
I have done this many times without any issues.
This time,while it was updating to 5.67,it failed about 90% through.
A box came on saying to close the window on the k3 Utility program.
I did this,and was going to sta
Date: 2018-04-02 11:08 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject:
Re: [Elecraft] Firmware Update TM Command
I tried it via the Utility Command test. It is for computer functions and not
in the Radio Menu or Config Menu.
Bob, K4TAX
Sent from my iPhone
> On Apr 2, 2018, a
I tried it via the Utility Command test. It is for computer functions and not
in the Radio Menu or Config Menu.
Bob, K4TAX
Sent from my iPhone
> On Apr 2, 2018, at 9:40 PM, Rich wrote:
>
> I think it is a computer command, not a menu/config setting. At least I
> think so?
>
> Rich
Bob
This is a macro command so does not appear in the config or menu. Take
a look at page 27 of the Programmer Ref. You can use the command tester
in the Utility to try it out.
Just for reference here is the Programmer Manual reference
TM (Transmit Meter Mode; GET/SET; K3/K3S only)
RSP for
Is this feature new or unique to the K3 but has been resident for the
K3S? If not, I haven't found the TM command in either the Menu or
Config of my K3S.
73
Bob, K4TAX
K3S S/N 10163
Firmware update
K3 MCU 5.62 / DSP 2.88 / FPF 1.26, 11-16-2017
* NEW CONTROL COMMAND (TM): The TM comman
I had not updated the firmware on my K3 in a while, so I went to the Elecraft
site, downloaded the new K3 utility, found the new firmware, and proceeded to
download it to the K3. I have suddenly lost the 100 w amp in the K3, and I can
no longer link the two vfo's. I'm not sure what else is scr
Are you using K3 Utility to load the firmware from our site?
Eric
elecraft.com
_..._
> On Jul 5, 2015, at 6:23 AM, Alfredo Velez WP3C via Elecraft
> wrote:
>
> HI
>
> I can’t download the last firmware in the page, does anyone knows if the web
> is offline?
>
> Alfredo Velez WP3C/NP4DX
>
HI
I can’t download the last firmware in the page, does anyone knows if the web is
offline?
Alfredo Velez WP3C/NP4DX
e-mail: mailto:w...@aol.com
http://www.wp3c.comule.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/
During a recent firmware update of a new (to me) K3/100, I noticed a brief
message scroll across the screen indicating a PA Error. If I recall correctly
it occurred during the DSP update. I rarely look at the computer or radio when
updating an Elecraft product until it's completed because it is
Fred,
The files that are displayed are those in your computer - in the folder
identified in the folder bar in K3 Utility.
If you click "Copy New Files from Elecraft", the latest release version
will be downloaded into that identified folder on your computer.
Once that has happened, you should s
Thanks Iain, that worked. I just forgot to that. So simple.
73 de Fred WY2E
On Mon, Apr 1, 2013 at 2:07 PM, iain macdonnell - N6ML wrote:
> On Mon, Apr 1, 2013 at 11:04 AM, Fred Lauricella
> wrote:
> > I have Elecraft K3 Utility Version 1.13.2.27
> >
> > MCU 4.48, FPF 1.15, DSP1 2.73 shows as
On Mon, Apr 1, 2013 at 11:04 AM, Fred Lauricella
wrote:
> I have Elecraft K3 Utility Version 1.13.2.27
>
> MCU 4.48, FPF 1.15, DSP1 2.73 shows as installed and available when I check
> versions.
>
> Elecraft site says
>
> Current K3 Firmware Revisions
>
> MCU 4.60 / DSP 2.80, 11/17/2012
>
> Latest
I have Elecraft K3 Utility Version 1.13.2.27
MCU 4.48, FPF 1.15, DSP1 2.73 shows as installed and available when I check
versions.
Elecraft site says
Current K3 Firmware Revisions
MCU 4.60 / DSP 2.80, 11/17/2012
Latest Production Release
This release will automatically be recognized by K3 Uti
bject: RE: [Elecraft] Firmware update process stalled K3
> Date: Sun, 26 Feb 2012 12:34:26 -0800
>
> Yes, the firmware load was interrupted.
>
> Go through the procedure described in K3 Utility Help, Troubleshooting, MCU
> Boot Loader.
>
> 73 de Dick, K6KR
>
>
> -O
, February 26, 2012 11:59 AM
To: Elecraft Reflector
Subject: [Elecraft] Firmware update process stalled K3
I wanted to install the latest firmware beta release (4.47).
The process started, on the K3 display MCU LD appeared, but after a while
the message appeared, that the update failed.
The K3 stayed
I wanted to install the latest firmware beta release (4.47).
The process started, on the K3 display MCU LD appeared, but after a while the
message appeared, that the update failed.
The K3 stayed in the MCU LD mode and the K3 utility showed that there is a
communication problem with the COM port.
Thanks to Dave, Ken and Don for the help and suggestions.
Dug out the old laptop from under the bed. It has a real serial port.
The transfer went fine and now all is working.
Joy!
73 de K1ESE
John
Don Wilhelm wrote:
> John,
>
> The blinking TX LED and screen with backlight off is exactly the
John,
The blinking TX LED and screen with backlight off is exactly the
condition that you are looking for. Go on to the next step and Test
Communications between K3Utility and the K3. If that is successful,
start the firmware download. If the communications test fails, check
the serial port
John:
Off the top of my head, the only thing I can offer is to remove all
external connections from the K3, except the power cord and a dummy
load. Also, if you are using a USB-to-9 pin adaptor and you have the
ability to use a "traditional" serial cable, try using that.
73, Ken K3IU
~~
Dave -
No joy. I did as the Utility Help said, but after the 10second start
it goes back to the red TX led flashing and the screen is dark.
I took out the KIO3 thinking that something was in transmit mode.
Again, no joy, same symptoms.
I can't even get a screen display. I'm holding off tak
John in the K3 Utility Help file it explains what to do, it's under
troubleshooting - Force K3 into firmware load required mode
Hope that fixes the problem...
73 Dave, G4AON
K3/100 #80 (f/w 3.68)
-
I attempted to update my K3 to version 3.68 and now my K3 no longer wo
I attempted to update my K3 to version 3.68 and now my K3 no longer works.
It was working fine. I updated to version 3.67 yesterday. I tuned the
radio on just now. It was working fine. I downloaded and extracted
version 3.68. I opened the K3 Utility. The utility read the K3's
firmware and
Is (VK9DWX) on 40m cw earlier this evening through the EU wall.
Cheers,
Terry
G4MKP
-Original Message-
From: Iain MacDonnell - K6IAM [mailto:[EMAIL PROTECTED]
Sent: 21 October 2008 20:24
To: g4mkp
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware Update DSP 1 Problem
Terry
Terry,
That is NOT the latest firmware - you want MCU 2.46 / DSP 1.92. I don't
know if that will solve your problem or not, but there release notes
include:
"MCU 2.37 / DSP 1.90, 9-2-2008
* FIRMWARE UPGRADE PROCESS IMPROVEMENT: When upgrading firmware,
MCU and DSP code versions may temporari
Can you please help?
It never rainsI have downloaded the latest FW from the server as
follows:
MCU 2.22
FPF 0.02
DSP1 1.88
DSP2 0.188 (don't have the second rx so this is redundant I think.
Having completed the update to the K3 (Send all new firmware to K3) the
utility informs me
K3 Utility Help text (which I recently beefed up a bunch, there's a
new K3 Utility version just published a few minutes ago), I mention in a
couple of places that DSP2 is for the optional KRX3 second receiver.
73 de Dick, K6KR
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAI
DSP 2 is for the sub-receiver which does not yet exist.
Doug
W6JD
-- Original message --
From: "H. Cary III" <[EMAIL PROTECTED]>
> I just downloaded the latest Firmware update MCU v1.65 and DSP v1.52
> It was a piece of cake, literally! Took four minutes max, more like
I just downloaded the latest Firmware update MCU v1.65 and DSP v1.52
It was a piece of cake, literally! Took four minutes max, more like 3 and a
half.
The screen showed a DSP 2 version available but it did not download.
Did I do something wrong?
73,
Cary, K4TM
K3-100 #178
___
Glenn,
It is not necessary to order the firmware update - you will receive the
latest firmware with your new K2 kit.
73,
Don W3FPR
> -Original Message-
>
> I'm new to this list and looking into building my own K2.
> This evening I was browsing the European distributor's online
> shop as
y you will get
the latest firmware included with your K2 and any options you may order at
the same time.
Don Brown
KD5NDB
- Original Message -
From: "ON4WIX" <[EMAIL PROTECTED]>
To:
Sent: Monday, January 30, 2006 2:30 PM
Subject: [Elecraft] firmware update?
Hi all,
Hi all,
I'm new to this list and looking into building my own K2.
This evening I was browsing the European distributor's online shop as I was
getting ready to order the parts I thought were necessary.
One of the options offered on the page is the firmware update, valued at 45,00
EUR.
Is this onl
33 matches
Mail list logo
