Greg, did you set CONFIG:RS232 to USB?
Cheers, Alan
Alan D. Wilcox, W3DVX (K3S-10457, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
Williamsport, PA 17701
On 1/11/24
Greg,
In CONFIG, make sure that RS232 is set to USB, and that you’re using the USB
port on the KIO3B as the proper connection. It’s easy to overlook that change,
and the rig won’t talk to the computer without it.
Tony W3FLH
__
Ele
I had previously used my K3 utility program with my K3 that had the standard
analog I/O board module. I recently upgraded to the KIO3B and now my k3
utility no longer functions. All the functions on the KIO3B work fine. What
is necessary to get the K3 utility running again? I do not need it f
It's been a long time since I used the utility, and seem to be having a
brain cramp. I'm unable to figure out how to download my current settings.
I have done it before on another computer that died, and can't seem to do
it with the new setup. I see where I can upload current firmware, etc but
not
tting back to you, I was on an extended trip.
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Steve Zabarnick
Sent: Friday, January 21, 2022 07:45
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 Utility saving macros to PC
I recently upgrade
I recently upgraded my ham radio computer, which required re-installation
of the K3 Utility. Previously, my macros appeared to be saved to the
computer, as they would appear in "edit macros" in the "command tester".
With this new install, the macros no longer show when starting the utility,
althoug
Does the USB port show up when you go to 'About This Mac' and then to 'System
Report' and then to 'Hardware:USB' ?
Assuming you are using a quality USB cable (from either Elecraft or Sabrent)
that uses the FTDI chip set, and not someother cable that uses a Prolific chip
set. (I have several USB
Today was the first time I tried using the K3 Utility since upgrading my
MacBook Pro to macOS Monterey v12.1 . The Utility doesn't see the USB
ports, only the Bluetooth port. Anyone else having this problem? Time for a
K3 Utility update? The last update was in September 2019.
73 Don NA6Z
__
On the website, go to Support/Firmware&Software. Pick the K-Line on the list,
and then K3S. Scroll down.
It’s used for firmware upgrades, configuration save/restore and several other
useful things, such as filter assignment by mode, etc.
Grant NQ5T
> On Jan 24, 2021, at 1:53 PM, NJMike wr
I've seen on the website a couple references to something called "K3
Utility". I can't find anything that actually explains what it is but I
think it has something to do with installing firmware upgrades.
Thanks,
Mike NJ2OM
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
After a computer configuration change, I needed to figure out which COM
port my K3 was coming up on. I ran K3 Utility and started trying COM ports.
After several "Port Closed" responses, I tried another and the rig began
sending *AA* and other stuff repeatedly. I couldn't stop it with the XMIT
butt
Thanks for the idea, unfortunately the problem persists. This makes me a
bit more nervous than before as I have done quite a bit of upgrading
lately (144MHz, Reflock, TCXO) and I had a fault in the tuner (capacitor
blown), and now the refclock is off by 220Hz.
Did anybody else had the problem
I’ve gotten that. I just saved again and that one was ok. Then I deleted the
error one...but I don’t think the save with the error is necessarily bad.
Chuck Jack Hawley
KE9UW
Sent from my iPhone, cjack
> On Jun 19, 2020, at 6:38 PM, "g...@gmx.net" wrote:
>
> Hello,
> anybody encountered a
Hello,
anybody encountered a problem restoring a previously saved
configuration? The error is "No response to write EEPROM block".
tnx 73 Gernot DF5RF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Sorry, if someone mentioned this, but the original KUSB uses a Prolific chipset.
That’s always been temperamental. Plugable.com have drivers for 10.15.3 but you
have to buy them and I haven’t tried them.
73 de David, M0XDF
The difference between genius and stupidity is that genius has its limits.
Hi Don,
I just upgraded to 10.15.4 and launched K3 Utility. It loaded fine, but
I noticed that the options under the Configuration and Calibration tabs
were grayed out. I switched to the Port tab and selected Test
Communications. When I got the positive response back from the K3, the
options und
The Mac Utilities currently on the Elecraft web site are both signed and
Notarized. They are ready to go with Catalina.
No need to right-click open any longer. A Big thank-you to the program’s
author, W4SMT for taking care of this.
73!
Jack, W6FB
> On Mar 27, 2020, at 8:27 PM, Hisashi T Fujina
I think it's unsigned and you need to right click and open it (or is it
command-click?) and then select "open" and click some dialog boxes.
At least that's how it worked for me right now.
On Fri, 27 Mar 2020, Grant Youngman wrote:
K3 Utility also ?.
On Mar 27, 2020, at 9:46 PM, Grant Youngma
K3 Utility also ….
> On Mar 27, 2020, at 9:46 PM, Grant Youngman wrote:
>
> I just put up Catalina 10.15.4. KX3 and PX3 Utility (latest versions) run
> just fine.
>
> Grant NQ5T
>
__
Elecraft mailing list
Home: http://mailman.qth.n
I just put up Catalina 10.15.4. KX3 and PX3 Utility (latest versions) run just
fine.
Grant NQ5T
> On Mar 27, 2020, at 8:32 PM, Grant Youngman wrote:
>
> Never mind. I just got notification for 10.15.4.
>
> I’ll put it up tonight, and see if the same thing happens.
>
> Grant NQ5T
>
;
> Grant NQ5T
>
>
>> On Mar 27, 2020, at 7:50 PM, Don Putnick wrote:
>>
>> I'm using macOS Catalina version 10.15.4 (not .3)
>> I'm using the latest version of the K3 Utility downloaded yesterday. Here's
>> the system info:
>>
;
> Grant NQ5T
>
>
>> On Mar 27, 2020, at 7:50 PM, Don Putnick wrote:
>>
>> I'm using macOS Catalina version 10.15.4 (not .3)
>> I'm using the latest version of the K3 Utility downloaded yesterday. Here's
>> the system info:
>>
>> *El
esterday. Here's
> the system info:
>
> *Elecraft K3 Utility:*
>
>
> Version: 1.19.9.6
>
> Obtained from: Identified Developer
>
> Last Modified: 9/6/19, 2:15 PM
>
> Signed by: Developer ID Application: David Fleming (N35N9C572M),
> Developer ID Ce
That shouldn’t have been needed. The drivers have been built into the macOS
since 10.9.
David, suggestions?
73,
Jack, W6FB
> On Mar 27, 2020, at 5:08 PM, Don Putnick wrote:
>
> That didn't work. BTW when I got the KUSB yesterday I went to the FTDI
> website to download the drivers. The VCP i
That didn't work. BTW when I got the KUSB yesterday I went to the FTDI
website to download the drivers. The VCP installer wasn't able to mount, so
I loaded the D2XX drivers. They do work with the KPA500 Utility.
On Fri, Mar 27, 2020 at 5:04 PM David Fleming wrote:
> Hi Don,
>
> Are you seeing th
Hi Don,
Are you seeing the K3 Utility menu at the top of the screen when you start the
app? If so, click Window -> Set To Default Position and see if that helps. If
not, we’ll have to try something else.
David, W4SMT
On Friday, March 27, 2020, 7:05 PM, Don Putnick wrote:
Hi all,
I'm working
Guys;
32 bit apps won’t even launch on Catalina. I suspect that the application’s
preferences are corrupt, and have advised him how to find and delete them.
73!
Jack, W6FB
> On Mar 27, 2020, at 4:38 PM, Grant Youngman wrote:
>
> The latest versions posted on the website all work fine under C
I'm using macOS Catalina version 10.15.4 (not .3)
I'm using the latest version of the K3 Utility downloaded yesterday. Here's
the system info:
*Elecraft K3 Utility:*
Version: 1.19.9.6
Obtained from: Identified Developer
Last Modified: 9/6/19, 2:15 PM
Signed b
The latest versions posted on the website all work fine under Catalina 10.15.3.
If you still have 32 bit apps installed, just upgrade them.
Grant NQ5T
> On Mar 27, 2020, at 7:22 PM, Walter Underwood wrote:
>
> Check whether it is a 32 bit app. I just checked my apps and my KXPA and PX3
> app
Check whether it is a 32 bit app. I just checked my apps and my KXPA and PX3
apps are 32 bit. Catalina requires 64 bit apps.
This explains how to check.
https://support.apple.com/en-us/HT208436
wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)
> On Mar 27, 2020, at
Don;
Which version of the K3 Utility are you using, and which version of Catalina?
73!
Jack, W6FB
> On Mar 27, 2020, at 4:04 PM, Don Putnick wrote:
>
> Hi all,
> I'm working with Rob at Elecraft on this, but I'm trying to gather more
> data for us. When I open the K3 Utility under Catalina, n
Hi all,
I'm working with Rob at Elecraft on this, but I'm trying to gather more
data for us. When I open the K3 Utility under Catalina, nothing is
displayed. If I go down to the dock, right click on the utility, then
select "Show all windows", the utility main screen opens. BUT if I click on
the sc
No, I find the Utility doesn't do that.
However, HRD/DM780 and FLDIGI will do that. Just put the radio in TEST
mode and send away.
73
Bob, K4TAX
On 3/12/2020 10:47 AM, Tom and Karen Norris wrote:
Are there K3s/K3 Utility settings that will allow me to monitor my K3s CW
keyer sending in the
Are there K3s/K3 Utility settings that will allow me to monitor my K3s CW
keyer sending in the K3 Utility Terminal window in addition to monitoring
it on the K3s rig display? It seems I've tried every CWT/TEXT DEC setting
available but still no luck. I'm just wanting to work on my CW character
send
We're about ready to release an update to the Windows version of the K3
Utility. While there are no sweeping changes, there are a lot of little
changes, new compiler, help text, fixed-speed capability.
Can a few of you help me test it?
Please reply directly to me.
73 de Dick, K6KR
d.
ave a PC at the remote site
and then connect via something like TeamViwer.
73 Tom va2fsq.com
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Mitch Wolfson DJ0QN / K7DX
Sent: December 17, 2019 11:03 PM
To: Rick Tavan ; Elecraft Reflector
Subject: Re: [Elecraft] K3 Ut
K7DX
Sent: December 17, 2019 11:03 PM
To: Rick Tavan ; Elecraft Reflector
Subject: Re: [Elecraft] K3 Utility vs. RemoteRig?
Rick,
This is a bug in the K3 Utility that you and I reported to Dick to fix in
February 2018. I am not sure where he is in getting this taken care of.
73,
Mitch K7DX /
Rick,
This is a bug in the K3 Utility that you and I reported to Dick to fix
in February 2018. I am not sure where he is in getting this taken care of.
73,
Mitch K7DX / DJ0QN
--
Mitch Wolfson K7DX / DJ0QN
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424
Can someone remind me why K3 Utility can't connect to a remote K3 via a
microBit RemoteRig Controller pair even though N1MM and Logger32 connect
just fine?
/Rick N6XI
--
Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home:
n 7.
> >
> > Ben
> >
> > Sent from Mail for Windows 10
> >
> > From: Don Wilhelm
> > Sent: Monday, April 15, 2019 4:16 PM
> > To: w4sc; Elecraft@mailman.qth.net
> > Subject: Re: [Elecraft] K3 Utility and Win 10
> >
> > Are you using a USB
Make sure your Registry is clean and no fragments from installs and
uninstalls exists. I use a product called CCleaner, Pro version, to
get rid of junk files and also clean the Registry. That's two different
functions. There is a free version available. You might be
surprised at the cr
I run everything on hubs - except for the K3. And, to make matters
worse, updates often upset the computer and a complete reinstall is
needed. Back up, back up, and back more. Gotta luv Windows 10!!!
__
Elecraft mailing list
Home:
"Use a USB port on the computer, not on a hub."
Why is this restriction imposed on the K3 utility? The KAT500 and KPA500
utilities work fine through my 10 port hub.
Andy, k3wyc
__
Elecraft mailing list
Home: http://mailman.qth.net/mail
@mailman.qth.net
Subject: Re: [Elecraft] K3 Utility and Win 10
Are you using a USB to serial adapter? If so, have you downloaded and
installed the latest drivers for that adapter (if the Elecraft KUSB the
drivers are from FTDI). Reboot the computer after installation.
Use a USB port on the
Using FTDI USB from Elecraft, FTDI latest drivers, No HUB, Works with win7,
does not work with Win10.
Going back to Win 7.
Ben
Sent from Mail for Windows 10
From: Don Wilhelm
Sent: Monday, April 15, 2019 4:16 PM
To: w4sc; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Utility and Win
Are you using a USB to serial adapter? If so, have you downloaded and
installed the latest drivers for that adapter (if the Elecraft KUSB the
drivers are from FTDI). Reboot the computer after installation.
Use a USB port on the computer, not on a hub.
73,
Don W3FPR
On 4/15/2019 3:54 PM, w4s
Having trouble with Win10 and K3 Utility communicating with K3. Latest K3
utility, and have tried 2 different Win10 machines, all latest updates. Tried
lower/higher speeds, no joy. Works FB win7. (tnx again Microsoft!!) Ideas
anyone??
Sent from Mail for Windows 10
__
Hello Again,
Thanks to all who responded. I found the answer:
The "SAVE" button in the K3 Utility Macro Editor writes directly to the
Windows Registry. That was the ONE place I hadn't thought to look!
BTW: The "Write to K3" button is an entirely different function, not the one
I was seeking.
73,
Ji
G'day,
Can someone tell me where the K3 Utility Macro Editor saves its data files?
Or what file type is used? I'm using Win 10. The help files don't seem to
mention it, and an Internet search came up empty.
I find the saved configuration files, and the K3 Frequency / Memory Editor
saved data files,
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
Solved.
I am using a 10 point USB hub and somehow the comm port number changed.
Sent from my iPhone
> On Mar 8, 2018, at 9:37 AM, Harlan Sherriff via Elecraft
> wrote:
>
> Does the utility save any info in Windows registry?
>
> I opened the utility to check for firmware. As soon as I opened
Does the utility save any info in Windows registry?
I opened the utility to check for firmware. As soon as I opened it, I received
the “K3 waiting for firmware load.” message.
I was unable to get anywhere using info from the help file, so connected the K3
to another computer and all was FB
Hi Tom!
Fancy meeting you here! ;-)
73,
Carl
N8VZ
Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
c...@n8vz.com
www.n8vz.com
EM89wh
IRLP 4533 Echolink 116070
PSK and JT65 Forever!
===
> On Mar 2,
I'm beginning my learning curve with my new K3S Kit (after a trip to
Elecraft for them to correct the 400hz filter I put in backwards! Otherwise
it was a good, fun build). I'm wanting to practice CW sending and I am able
to see my K3S paddle input characters in the K3S VFO B. But I am not able
to r
quot;
-larry (K8UT)
-Original Message-
From: Rick Tavan
Sent: Monday, January 02, 2017 7:04 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 Utility Not Connecting (Virtual Windows
Environmentmay be a factor)
Looking for a sounding board here to jump-start my brain. I run Windows 7
unde
Looking for a sounding board here to jump-start my brain. I run Windows 7
under VMware Fusion on a Macbook Pro. Although it's a difficult environment
to maintain, most Windows software works well. I run RemoteRig boxes to
connect a local K3 acting as a control head to a remote K3. The RemoteRig
box
oblem...!!!
73, Terry, N4TLF
-Original Message-
From: Bill Johnson
Sent: Sunday, December 18, 2016 9:04 PM
To: 'Ken Arck' ; 'Rick Braun' ; 'Elecraft'
Subject: Re: [Elecraft] K3 Utility with Windows 10
I have a surface pro 3 and surface book and neither have i
] K3 Utility with Windows 10
My Surface Pro sucks with driver compatibility issues so perhaps that is
your proble.
My "ham" computer runs Win 10, 64 bit and no problems at all connecting to
the K3s with anything
Ken
At 03:43 PM 12/18/2016, Rick Braun wrote:
>I downloaded the late
aft"
Sent: 12/18/2016 6:43:28 PM
Subject: [Elecraft] K3 Utility with Windows 10
I downloaded the latest K3 utility onto my Surface Pro 4 with Windows
10. My K3 is serial 2869, with RS232 to USB adapter cable. I
downloaded the driver indicated on the Elecraft site. Problem: I
cannot, f
The issue with the Prolific chipset (or more
accurately, the counterfeit driver issue) is well
known and well documented as affecting Win 7 and later
At 04:16 PM 12/18/2016, Nr4c wrote:
Which KUSB? The older Prolific or the more
recent FTDI? Different drivers. Sent from my
iPhone ...nr4c.
Which KUSB? The older Prolific or the more recent FTDI? Different drivers.
Sent from my iPhone
...nr4c. bill
> On Dec 18, 2016, at 6:43 PM, Rick Braun wrote:
>
> I downloaded the latest K3 utility onto my Surface Pro 4 with Windows 10. My
> K3 is serial 2869, with RS232 to USB adapter cab
My Surface Pro sucks with driver compatibility
issues so perhaps that is your proble.
My "ham" computer runs Win 10, 64 bit and no
problems at all connecting to the K3s with anything
Ken
At 03:43 PM 12/18/2016, Rick Braun wrote:
I downloaded the latest K3 utility onto my
Surface Pro 4 wit
see the port
disappear and then show up look for any exclamation marks.Start with that.73
Tom www.va2fsq.com
Sent from my Samsung Galaxy smartphone.
Original message From: Rick Braun Date:
2016-12-18 6:43 PM (GMT-05:00) To: Elecraft
Subject: [Elecraft] K3 Utility with
Rick,
All Windows 10 versions are not created equal. If you have a Win10 full
size computer, try it on that. I have not had any problem with Win10 on
either my laptop or my desktop computers.
On 12/18/2016 6:43 PM, Rick Braun wrote:
I downloaded the latest K3 utility onto my Surface Pro 4
I downloaded the latest K3 utility onto my Surface Pro 4 with Windows 10. My
K3 is serial 2869, with RS232 to USB adapter cable. I downloaded the driver
indicated on the Elecraft site. Problem: I cannot, for the life of me, get the
radio to connect to the computer. Could this be a 32 bit ver
There are two aspects in the terminal mode pertaining to CW that need
adjustment. There is no auto scrolling for typed text to be transmitted in
the bottom panel and the separation bar between received and transmitted
text is frozen and can't be moved. I don't use the received text per se but
wol
Any idea of when the K3 Utility for Mac will be updated?
Tom K4AEN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list h
I use VSPE. My logging program and WSJTX work with it just fine. Yes, Omnirig
is also used for WSJTX.
http://www.eterlogic.com/Products.VSPE.html
Been using it for years.
Jim Leder
__
Elecraft mailing list
Home: http://mailman.qth.ne
Gary,
I also had a look around for control software - but could find nothing
I really liked (There re some great programs out there) - but either too
complex or not focused on what I want. So….
Write your own ! I know it sounds daunting - but the K3 has an
excellent programming
I'm starting to explore other options with
different software and my K3s. My main
interest is in being able to send CW, RTTY
and it would be a nice plus to send from
the voice memories when calling in a
pileup and not have to keep hitting the
function button every time I put out my
call.
Se
73, Mike NF4L
>>>
>>>
>>>> On Dec 7, 2015, at 10:11 AM, Dick Dievendorff wrote:
>>>>
>>>> I'm looking into it now.
>>>>
>>>> Dick, K6KR
>>>>
>>>>
>>>> -Original Message-
>> -Original Message-
>>> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike
>>> Reublin NF4L
>>> Sent: Monday, December 7, 2015 07:06
>>> To: Kenneth A. Christiansen
>>> Cc: Elecraft List
>>> Subject: Re:
:
>>
>> I'm looking into it now.
>>
>> Dick, K6KR
>>
>>
>> -Original Message-
>> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike
>> Reublin NF4L
>> Sent: Monday, December 7, 2015 07:06
>> To
Of Mike
> Reublin NF4L
> Sent: Monday, December 7, 2015 07:06
> To: Kenneth A. Christiansen
> Cc: Elecraft List
> Subject: Re: [Elecraft] Elecraft K3 Utility problem
>
> Ken -
>
> I can duplicate your problem on my Win10 Pro setup. Elecraft support is
> supp...@el
elecraft-boun...@mailman.qth.net] On Behalf Of Mike
> Reublin NF4L
> Sent: Monday, December 7, 2015 07:06
> To: Kenneth A. Christiansen
> Cc: Elecraft List
> Subject: Re: [Elecraft] Elecraft K3 Utility problem
>
> Ken -
>
> I can duplicate your problem on my Win10 Pro
I'm looking into it now.
Dick, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike
Reublin NF4L
Sent: Monday, December 7, 2015 07:06
To: Kenneth A. Christiansen
Cc: Elecraft List
Subject: Re: [Elecraft] Elecraft K3 Utility problem
ER or click Close I get the
> following error and the programs quits.
>
> " Elecraft K3 Utility
> Elecraft K3 Utility has stopped working
> A problem caused the program to stop working correctly.
> Windows will close the program and notify you if a solution is available.
>
this list though you
could also call Elecraft Tech Support (see their website for the phone#)
and let them know as well.
Jim - W0EB
-- Original Message --
From: "Kenneth Christiansen"
To: "Elecraft@mailman.qth.net"
Sent: 12/7/2015 6:05:04 AM
Subject: [Elecraft] El
Hi to the group
I was helping a friend get on PSK31 and discovered I have a problem with the
Elecraft K3 Utility program revision 1.15.8.18, my K3s sn 10329 and my HP 64
bit laptop running the latest updates of Windows 10 Home.
Everything works OK until I click PSK 31 or RTTY and Options. If i
st ordered a multi-port serial converter, so we'll see how that works
out.
73,
Alan. G4GNX
-Original Message-
From: Bob McGraw - K4TAX
Sent: Saturday, September 12, 2015 8:34 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 Utility Save Configeration freezes
I've foun
/
73
Bob, K4TAX
<https://www.rtsystemsinc.com/>
Date: Sat, 12 Sep 2015 07:24:08 -0700 (MST)
From: way235 via Elecraft
To:elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Utility Save Configeration freezes
Message-ID:<1442067848692-7607476.p...@n2.nabble.com>
Content-Type: text/plai
I found that my computer has a serial connector so I ordered a serial cable.
The serial cable saves the configuration in a few seconds. I will use the
serial cable and not use the serial to USB since it does not work. I really
like this K3 Utility and find it very useful.
Thanks.
Wayne
--
Vie
I am out of town untill Friday. I ordered a 10 foot serial cable and will see
how it works. If you works in a few seconds then I will see if I can get the
serial to Iusb work.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Utility-Save-Configeration-freezes-tp760
You might want to look at your computer.
It sounds to me like K3Utility has no problem gathering the
configuration information, but your computer is having trouble saving
the data to the file.
73,
Don W3FPR
On 9/6/2015 11:44 PM, way235 via Elecraft wrote:
way235 wrote
The Save Configuration
G'day,
FWIW config save on my Win7/64 box with 38400 bit/sec between it and the
K3 takes about 4 seconds beginning to end.
Regards,
Mike VP8NO
On 07/09/2015 00:44, way235 via Elecraft wrote:
way235 wrote
I am using version 1.15.8.18 with windows 7. The save configuration bar
goes to about
way235 wrote
> I am using version 1.15.8.18 with windows 7. The save configuration bar
> goes to about 80 percent and then the program freezes and I have to go to
> task manager to close the utility.
> Configure crystal filters works, Edit CW memories works, Power on banner
> and time and date wo
I am using version 1.15.8.18 with windows 7. The save configuration bar goes
to about 80 percent and then the program freezes and I have to go to task
manager to close the utility.
Configure crystal filters works, Edit CW memories works, Power on banner
and time and date work.
I just can't save t
K3 Utility revision 1.15.8.18 has been placed on our web site, see
http://www.elecraft.com/K3/k3_software.htm
The new version has several timing adjustments (for K3 and K3S) and commands
to react to new K3S capability.
It is particularly important for K3S owners to upgrade to this new Utility
rev
I did my TX cal with a Mac running OS X 10.10.3
(Yosemite): No problem.
Phil W7OX
On 5/28/15 5:05 PM, Hisashi T Fujinaka wrote:
I had problems as well. I used my work laptop
with Windows 8.1 and it
worked fine. I think there are issues with
Yosemite.
On Thu, 28 May 2015, Jim Hooper wrote:
, and 6m.
Thanks in advance,
Hoop
K9QJS
Elecraft K3 Utility for OS X Revision 1.14.10.24
OS X Version 10.10.3
K3 MCU revision 05.14. RS-232 speed 38400 bps.
Starting 5 watt calibration.
Calibrating at 1.900 MHz
Calibrating at 3.750 MHz
Calibrating at 5.366 MHz
Calibrating at 7.150 MHz
Calibrating
tried two different dummy loads on Antenna 1.
The K3 automatic tuner gets a 1.0/1 on the dummy load for all bands including
15m, 12m, 10m, and 6m.
Thanks in advance,
Hoop
K9QJS
Elecraft K3 Utility for OS X Revision 1.14.10.24
OS X Version 10.10.3
K3 MCU revision 05.14. RS-232 speed 38400
,
Hoop
K9QJS
Elecraft K3 Utility for OS X Revision 1.14.10.24
OS X Version 10.10.3
K3 MCU revision 05.14. RS-232 speed 38400 bps.
Starting 5 watt calibration.
Calibrating at 1.900 MHz
Calibrating at 3.750 MHz
Calibrating at 5.366 MHz
Calibrating at 7.150 MHz
Calibrating at 10.125 MHz
Calibrating
Subject: [Elecraft] K3 Utility help in England, please
Dear UK K3 owners,
This email is a request for some help in troubleshooting my recently
acquired K3. It is an early model Ser No 104 and has been hardly used. I
suspect I am suffering from front panel to RF board pin corrosion problems
since
Dear UK K3 owners,
This email is a request for some help in troubleshooting my recently acquired
K3. It is an early model Ser No 104 and has been hardly used. I suspect I am
suffering from front panel to RF board pin corrosion problems since K3 utility
fails to connect and comes up with the e
I used the K3-utility in parallel to my contest-program. Its "terminal"
is really helpful to read the decoded rtty and cw
while it already disappeared out of the display of the K3. My K3 often
decodes rtty better than my contest-program.
For possible post-contest comparing I want to store the wh
Hi All,
After over a week of trying various fixes, Bill, NR4C, may have found
the solution to my communications interface problem! I had total
forgotten about a severe Thunder storm we has less than a weeks
ago! Never thought to couple my problem with nearby lightning strikes!
Bill wisely
Tom.
I suspect one of two possibilities. Check ALL RS-232 settings, both on computer
and radio. You seem ok w/computer end, chk CONFIG:RS232 for radio settings.
Mine says 38,400 b.
But you may have an issue with the serial interface chip in the K3. This is not
a common occur acne but it has
I need help! I cannot get my computer to communicate with my K3. A
week ago, I had no trouble doing this. Now, when I attempted to use
the transceiver using either the K3 Utility, revision 1.13,5.9, or
TRX-Manager (a CAT program), there is no handshaking. At one time,
both of these programs
time.
73 de Dick, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Robert
Weiman
Sent: Tuesday, June 10, 2014 8:55 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3 Utility Terminal Program
The terminal tab provides a nice CW keyboard, exc
[Elecraft] K3 Utility Terminal Program
The terminal tab provides a nice CW keyboard, except that I'm not able to
maintain it in "Transmit" mode without keeping the buffer populated. Does
anyone know of a way to do that? It would surely make normal QSOs less of a
chore.
1 - 100 of 455 matches
Mail list logo
