Re: [Elecraft] FW: Elecraft K3/P3 last-time order

It’s on Elecraft’s web site to make it even easier for us. https://elecraft.com/products/k3s-transceiver Paul > On Apr 20, 2021, at 9:20 AM, w4sc wrote: > > Several months ago there was a request for “Who is interested” in K3/K3S > modules and accessories. I suspect if you did not express

Re: [Elecraft] FW: Elecraft K3/P3 last-time order

Several months ago there was a request for “Who is interested” in K3/K3S modules and accessories. I suspect if you did not express an interest, you may NOT have received the latest email of Monday 19 April with the link to an order page for making a half or full deposit on the items planned

Re: [Elecraft] FW: Elecraft K3/P3 last-time order

> b...@wjschmidt.com From: Robie Elms Sent: Tuesday, April 20, 2021 10:37 AM To: b...@wjschmidt.com Cc: Elecraft Mail List Subject: Re: [Elecraft] FW: Elecraft K3/P3 last-time order Bill, They are taking deposits now. Robie - AJ4F On Tue, Apr 20, 2021 at 10:34 AM Dr. William J. S

Re: [Elecraft] FW: Elecraft K3/P3 last-time order

Bill, They are taking deposits now. Robie - AJ4F On Tue, Apr 20, 2021 at 10:34 AM Dr. William J. Schmidt wrote: > I must have missed that email...?? and I wondered when they would start > taking orders for the upgrades. Anyway take note if you still want K3/K3s > parts before they are gone!

[Elecraft] FW: Elecraft K3/P3 last-time order

I must have missed that email...?? and I wondered when they would start taking orders for the upgrades. Anyway take note if you still want K3/K3s parts before they are gone! Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Moderator – North American QRO Group at

Re: [Elecraft] FW: [Elecraft-K3] K3S Comparison table finalized(linkattached)

How could you possibly know that? On 1/30/2019 2:08 PM, Ron Genovesi wrote: Having owned both, I can assure you of one thing. You really don’t want to go there. Believe me      Ron Genovesi            N3ETA Sent from my iPhone On Jan 30, 2019, at 12:30 PM, Wes >

Re: [Elecraft] FW: [Elecraft-K3] K3S Comparison table finalized(linkattached)

Having owned both, I can assure you of one thing. You really don’t want to go there. Believe me Ron Genovesi N3ETA Sent from my iPhone > On Jan 30, 2019, at 12:30 PM, Wes wrote: > > I agree. > >> On 1/30/2019 10:08 AM, Roger wrote: >> A comparison with TS-890S would be

Re: [Elecraft] FW: [Elecraft-K3] K3S Comparison table finalized(linkattached)

I agree. On 1/30/2019 10:08 AM, Roger wrote: A comparison with TS-890S would be interesting. 73, Roger DL2YDP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] FW: [Elecraft-K3] K3S Comparison table finalized (linkattached)

A comparison with TS-890S would be interesting. 73, Roger DL2YDP -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] FW: [Elecraft-K3] K3S Comparison table finalized (linkattached)

. -Original Message- From: Jim N7US Sent: Monday, January 28, 2019 8:18 PM To: Elecraft Reflector Subject: [Elecraft] FW: [Elecraft-K3] K3S Comparison table finalized (linkattached) I'd be interested in seeing a similar comparison of the K3S to the FlexRadio. Jim N7US -Original

[Elecraft] FW: [Elecraft-K3] K3S Comparison table finalized (link attached)

I'd be interested in seeing a similar comparison of the K3S to the FlexRadio. Jim N7US -Original Message- My two cents: > Rob wrote: > > I would count the order differently if numbering is of interest. The radio at #1 cannot be reproduced with current software. Clarified recently

[Elecraft] FW: Elecraft K3 Utlity 1.13.5.9 on Elecraft web site

Detlaf: I'm unable to respond directly because I keep getting this response: Delivery to the following recipients was aborted after 0 second(s): and your e-mail address. I've just tested the K3 Utility Terminal Page with 1.13.5.9 and it seems to be working as it did before. Do you have K3

[Elecraft] Fw: Elecraft K3; recent antenna mis-understanding

I think I mentioned on my last post that I was going to try the MFJ-212 with an ATU connected to coax to see what the P3 displayed then. I don't know if anyone is interested, so I won't take up bandwidth here. If anyone is, please reply off line and I will tell you what I found. Rich, n0ce

[Elecraft] FW: FW: [Elecraft K3] Volume Level with NR

I should mention that my NR is set for F8--4. Tom - W4BQF -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tommy Alderman Sent: Monday, October 04, 2010 8:57 PM To: elecraft@mailman.qth.net Subject: [Elecraft] FW: [Elecraft

FW: [Elecraft] K3 Annoying diddle in RTTY

Joe: What MCU revision and what version of the K3 Utility are you using? Wayne provided immediate EOT support in MCU firmware revision 2.48, and K3 Utility Version 1.0.10.17 exploited that capability. What's supposed to happen is when we run out of characters to send, the carrier should drop

FW: [Elecraft] K3

It occurred to me that others might benefit from this thread, especially Lee's pictures. 73, John, W2GW -Original Message- From: Lee (WW2DX) [mailto:l...@ww2dx.com] Sent: Thursday, December 11, 2008 4:41 PM To: John E. Reiser Subject: Re: [Elecraft] K3 Thanks John, I really

Re: Fw: [Elecraft] K3 and CQWW

. I hope to be able to purchase a K3 someday if Elecraft doesn't go belly up first. 73, Steve Brandt N7VS Portland, Oregon Steve, I wouldn't wait that long, you may be too old to enjoy it. :-) 73, Tony W7GO ___ Elecraft

Fw: [Elecraft] K3 and CQWW

Well put. I learned code from a former world war II Merchant Marine radio operator back in the 60's. He had me copying 25 wpm code groups, not plain language, effortlessly by the time I took my Extra class code test. I used to be able to carry on at 25 wpm. But I found 18 - 20 wpm was a very

FW: [Elecraft] K3 + Ameritron AL-811

-Original Message- I received a used 811-H that I had won on eBay Friday night and used on Saturday in the ARRL-SS-CW. I got the five states I needed for WAS CW with no problem. With 500 to 600 watts output I got answers to my calls immediately. Key out and no alc. Keep the drive

FW: [Elecraft] K3-Problem with DX spot point--click and ACLog

I think that, in the spirit of the Elecraft design team and this reflector (and before Wayne and Eric feel the need to step in), I would like to ask that this thread be terminated at this point. I was simply trying to provide a heads-up to other K3 owners. It has never been my intention to

FW: [Elecraft] K3 #1815

To: elecraft@mailman.qth.net Subject: [?? Probable Spam] [Elecraft] K3 #1815 order from: 14.06.2008 arrived: 26.09.2008 vy 73s de Stefan, DH0SP mine ordered 19.05.2008, sent to SP Land 16.09.2008, arrived 19.09.2008 and still laying in custom service... thought we are in Europe United

FW: [Elecraft] K3 #1140 For Sale on ebay

Another reason to ship overseas: More DX stations. Just trying to do my part to help out the DX chasers... Mike AI4NS ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr.

Re: FW: [Elecraft] K3 and StepIR/Icom PW-1

Subject: Re: FW: [Elecraft] K3 and StepIR/Icom PW-1 Adam -- I guess it depends on the user. Certainly having the ALC connected (if it were compatible) would be preferred...but my point is that saying the K3 should not be used as an exciter for the PW-1 [without ALC] is not entirely

FW: [Elecraft] K3 and StepIR/Icom PW-1

Hi Tom, The K3 should not be used as an exciter for the PW1 unless the polarity of its external ALC input has been changed from positive-going (original) to negative-going (range 0 to -4V). Failure to heed this warning will result in extensive damage to the PW1, necessitating costly repairs (as

Re: FW: [Elecraft] K3 and StepIR/Icom PW-1

I'm using the K3 with a PW-1 and the beauty of it is you don't need the ALC if you use the K3's capacity to store the power level (drive level) for each band. Obviously if you use the K3 barefoot at 100 watts you would have to be careful to turn it back down with the amp but I just leave it

FW: [Elecraft] K3 and StepIR/Icom PW-1

-Sep-08 19:05 To: Adam Farson Subject: Re: FW: [Elecraft] K3 and StepIR/Icom PW-1 I'm using the K3 with a PW-1 and the beauty of it is you don't need the ALC if you use the K3's capacity to store the power level (drive level) for each band. Obviously if you use the K3 barefoot at 100 watts you

Re: FW: [Elecraft] K3 and StepIR/Icom PW-1

of equipment such as the PW1 at risk by connecting it to an exciter without a fully-functional ALC loop. Cheers for now, 73, Adam VA7OJ/AB4OJ -Original Message- From: Greg - N4CC [mailto:[EMAIL PROTECTED] Sent: 7-Sep-08 19:05 To: Adam Farson Subject: Re: FW: [Elecraft] K3 and StepIR/Icom PW-1

RE: FW: [Elecraft] K3 and StepIR/Icom PW-1

: [Elecraft] K3 and StepIR/Icom PW-1 Adam -- I guess it depends on the user. Certainly having the ALC connected (if it were compatible) would be preferred...but my point is that saying the K3 should not be used as an exciter for the PW-1 [without ALC] is not entirely accurate. it is possible to use

Re: FW: [Elecraft] K3 and StepIR/Icom PW-1

/AB4OJ -Original Message- From: Greg - N4CC [mailto:[EMAIL PROTECTED] Sent: 7-Sep-08 19:05 To: Adam Farson Subject: Re: FW: [Elecraft] K3 and StepIR/Icom PW-1 I'm using the K3 with a PW-1 and the beauty of it is you don't need the ALC if you use the K3's capacity to store the power level

Re: FW: [Elecraft] K3 and StepIR/Icom PW-1

On Mon, 08 Sep 2008 00:00:06 -0400, Greg - N4CC wrote: Certainly having the ALC connected (if it were compatible) would be preferred.. It MAY be true for this amp, but at least some other amp mfrs advise against the use of ALC with their amps. They say that modern amps work fine without ALC

RE: FW: [Elecraft] K3 and StepIR/Icom PW-1

Hi Jerry, Glad to hear that the fix has now been implemented. Cheers for now, 73, Adam VA7OJ/AB4OJ -Original Message- From: Jerry Flanders [mailto:[EMAIL PROTECTED] Sent: 7-Sep-08 21:40 To: Greg - N4CC; Adam Farson Cc: elecraft@mailman.qth.net Subject: Re: FW: [Elecraft] K3

Fw: [Elecraft] K3 antenna tiner related question

John, Yes, it does happen in ATU bypass mode. I wonder if there's some relationship to the RX input overload circuit? There are no other antennas connected to the radio. Perhaps there's some relationship to the unshielded wires going to the two coax connectors that are currently being

Fw: [Elecraft] K3 - SSB levels

I noticed this same thing after upgrading my firmware to 1.88/1.70. I have been waiting to see if it was just me, or if someone else is experiencing it. It is not a big problem, but happens every time I power down, and then back up. Turning the power knob slightly, and then back, fixes it.

FW: [Elecraft] K3 Beta Firmware Revision 2.02

-Original Message- From: Tom Doligalski [mailto:[EMAIL PROTECTED] Sent: Sunday, June 08, 2008 7:29 AM To: 'Dave G4AON' Subject: RE: [Elecraft] K3 Beta Firmware Revision 2.02 I think you'll find that Channel Hopping on the K3 will work just as you wish try this: 1. Load your

Fw: [Elecraft] K3 no issues with output power on ssb!

Is the K3's wattmeter a peak reading type? If so, it only kicks up to about 50 watts until I increase the TXG VCE to 3 db which makes it double to 100 watts. So far, audio reports are good. Someone here reported distortion of some kind when doing this however. I really need a proper external

Fw: [Elecraft] K3 - That sacred date

I'll wager that few --- if any --- owners of Yakenom can quote the S/N's of their radio(s) either ... (:-)) 73! Ken Kopp - K0PP K2 #5665 K3 #56 [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to

Fw: [Elecraft] K3: preview of coming attractions

- Original Message - From: wayne burdick [EMAIL PROTECTED] To: Elecraft Reflector elecraft@mailman.qth.net Sent: Thursday, April 10, 2008 8:47 PM Subject: [Elecraft] K3: preview of coming attractions Hi all, I'm leaving Saturday for a long-planned 10-day vacation. I thought we'd

Re: Fw: [Elecraft] K3 CW Dual PB

I think that it got fixed, then broke in the latest FW release. 73 Stewart G3RXQ On Fri, 21 Mar 2008 16:32:17 -0400, Van W1WCG wrote: Strange, Stewart, that's just the way it sounds, also. I've listened with this mode engaged on several occasions now, and I can't really observe the dual

Fw: [Elecraft] K3 CW Dual PB

Strange, Stewart, that's just the way it sounds, also. I've listened with this mode engaged on several occasions now, and I can't really observe the dual passband effect. Moreover, the shift control seems to be disabled, and the width control moves the outer bands but does not seem to affect

Fw: [Elecraft] K3 -Firmware Downloader 1.1.3.6

I down loaded OK with the old version, but still don't know how to get the new version of the loader?? Bill - Original Message - From: Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED] To: John Reiser [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Friday, March 07, 2008 5:56 PM

Fw: [Elecraft] K3 Line-In for PSK31 not working

Ah Ha! This explains the sloppy fit 73! Ken Kopp - K0PP Alan - I have used PSK31, MFSK16 and RTTY using Hamscope with no problems. However, the rear panel LINE IN (mono) and LINE OUT (stereo) jacks are 3.5mm, NOT the old trusty 1/8 inch (they are slightly larger). I initially used some

Fw: [Elecraft] K3 Performance

Oh yes. Perhaps I should have mentioned that. I do have the KBPF3 installed--and the 6 khz filter also. From about 750 khz or so the radio is very good. It's just that bottom 200 khz or so that it seems to drop off. Dave W7AQK - Original Message - From: Tom Hammond [EMAIL

FW: [Elecraft] K3 AM mode

Everyone has applauded Wayne and Eric (and rightfully so) for their hard work and dedication that goes above and beyond expectations to provide the world amateur radio community with exceptional products. This, of course, includes the K3 which, I think, is destined to become THE standard,

FW: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter

My K3 back panel RS-232 connector is female. The USB to serial adapter I have is male. The m-f cable I have works fine. I'm not sure what picture you're looking at. I looked at the data sheet and it wasn't immediately clear to me which gender they were. The K3 15-pin accessory connector is also

Re: FW: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter

Mike Fatchett W0MU wrote: Or buy an adapter at radio shack...Gender changers. Better still, make yourself a universal gender-changer/extension-cable. Buy two male DB9 connectors for ribbon cable, and two female, then squeeze them onto a foot of 9-way ribbon cable like this:

FW: [Elecraft] K3 firmware DSP2 N/A?

Available means that there is a corresponding file (hauxsomething) available in your firmware folder. I made some attempt in the Help section on the Firmware topic to describe what the columns (and DSP2) mean. I know nobody reads help (I rarely do), but I did make an attempt in the Help file to

FW: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter

-- Forwarded Message From: Mike Fatchett W0MU [EMAIL PROTECTED] Date: Tue, 11 Dec 2007 19:27:22 -0700 To: John Reiser [EMAIL PROTECTED] Conversation: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter Subject: Re: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter

Fw: [Elecraft] K3 problem with logging program after download upgrade

Could this account for the Intel Hex file ran out of bytes before Intel End file record was read -and- Intel Hex Read error: Expected start characher : not found messages when attempting (unsuccessfully) to load the new upgrade into my K3? 73! Ken Kopp - K0PP [EMAIL PROTECTED] - Original

Fw: [Elecraft] K3 display for contesters

Might there be a user setting or mode setting where when pushed or implemented a completely new radio setting for contesting could be selected along with a totally different display set of functions ? Walt K8CV Royal Oak, MI. - Original Message - From: Ed Muns [EMAIL PROTECTED] To:

FW: [Elecraft] [K3] Can you turn a filter off

occurred to me (they do sometimes), in order to do A/B comparisons once I have my K3, can you leave a filter in place, but turn it 'off' via config menu, so the K3 effectively ignores it? Yes. The last time I tried this I had to then exit the menu and readjust the width to get it to

Fw: [Elecraft] K3 - any CTCSS encoding and decoding function

CTCSS is also needed on 10M FM frequencies. 73! Ken Kopp - K0PP [EMAIL PROTECTED] or [EMAIL PROTECTED] - Original Message - From: Siu Johnny To: elecraft@mailman.qth.net Sent: Sunday, 09 September, 2007 13:55 Subject: [Elecraft] K3 - any CTCSS encoding and decoding function Is

Fw: [Elecraft] K3 RX only in port - Summary

Many Thanks to everybody that responded, both via the Reflector and privately. To summarise, it seems the most straightforward and economical way of achieving my requirement is to purchase the KXV3 transverter i/f, (or optionally, but more expensive, the KAT3 ATU). Altho' I have no need for

Re: Fw: [Elecraft] K3: 21st century assembly manual

In the thinking of things for other people to do department, I took a sight-line using Google Earth from your QTH and it looks like you may have a straight shot to an industrial area in south west Butte, if you can get a 2.4GHz link up there to your tower. (Kevin KD5ONS would probably have to

Fw: [Elecraft] K3: 21st century assembly manual

Har Har! (:-)) I live in a small unincorporated community of about 400 houses. There's a small cable system with about 40 customers and there's never going to be an improvement. We're Dish Network subscribers. 45K dial-up is blazing fast service here. The same is true in the Oregon State

FW: [Elecraft] K3 Tools / Manual

Hi Ken and Bob...perhaps others. It occurred to me that when some order a K3, some might want to have their tools ready and an appropriate area prepared awaiting its arrival. Some wouldn't want to find themselves at midnight not recalling where they had last stored a perhaps required appliance.