I use SpectraVue as a panoramic adapter with my K3 and three XV transverters.
Connected to the K3's IF out is an SDR-IQ, which is connected using the USB
port to my PC.
I don't have any issues with a 'variable frequency error' on 6 meters or any
other band. I can point and click to a signal
> Not if you connect via USB.
I am (was) connecting via USB.
73,
... Joe, W4TV
On 6/26/2013 4:56 PM, Wes Stewart wrote:
From: "Joe Subich, W4TV"
The only issue is the constantly changing IF offset in the
K3 (IS)
which SpectraVue does not track. This results in a variable
frequency
As a part of the referenced thread, that's not what it says at all.
--- On Wed, 6/26/13, amsct...@comcast.net wrote:
> From: amsct...@comcast.net
> Subject: Re: [Elecraft] K3 & SDR/IQ
> To: elecraft@mailman.qth.net
> Date: Wednesday, June 26, 2013, 12:21 PM
> Spectr
> From: "Joe Subich, W4TV"
>
> The only issue is the constantly changing IF offset in the
> K3 (IS)
> which SpectraVue does not track. This results in a variable
> frequency
> error based on mode.
Not if you connect via USB.
__
Ele
> http://groups.yahoo.com/group/SDR-IQ/message/6543
>
>
> Mike Alexander - N8MSA
>
> amsct...@comcast.net
>
> - Original Message -
> From: "Joe Subich, W4TV"
> To: elecraft@mailman.qth.net
> Sent: Wednesday, June 26, 2013 2:04:31 PM
&
From: "Joe Subich, W4TV"
To: elecraft@mailman.qth.net
Sent: Wednesday, June 26, 2013 2:04:31 PM
Subject: Re: [Elecraft] K3 & SDR/IQ
On 6/26/2013 1:43 PM, Wes Stewart wrote:
LP-Bridge will handle the serial port issue.
Maybe - if none of your software uses one of the commands tha
: "Joe Subich, W4TV"
To: elecraft@mailman.qth.net
Sent: Wednesday, June 26, 2013 2:04:31 PM
Subject: Re: [Elecraft] K3 & SDR/IQ
On 6/26/2013 1:43 PM, Wes Stewart wrote:
> LP-Bridge will handle the serial port issue.
Maybe - if none of your software uses one of the comman
Joe Subich, W4TV wrote:
From: Joe Subich, W4TV
Subject: Re: [Elecraft] K3 & SDR/IQ
To: elecraft@mailman.qth.net
Date: Tuesday, June 25, 2013, 8:09 PM
> So how do yu set it up to watch lower end of 6m on the
K3, without
> using a transverter?
Connect SDR-IQ to the IF Out jack (n
LP-Bridge will handle the serial port issue. I run the K3, Spectravue, DXBase
and N1MM with one USB to Serial adapter and ports to spare.
--- On Tue, 6/25/13, Joe Subich, W4TV wrote:
> From: Joe Subich, W4TV
> Subject: Re: [Elecraft] K3 & SDR/IQ
> To: elecraft@mailman.q
You don't say what software you are running but if it's Spectravue, just go to
the ExtRadio tab, select the K3 from the drop down list, set the com port, baud
rate and check mode tracking. In the SDR-IQ setup, set the filter BW to 100 or
150. Press F12 and you should be in business.
Wes, N7WS
> So how do yu set it up to watch lower end of 6m on the K3, without
> using a transverter?
Connect SDR-IQ to the IF Out jack (not the RX Ant) and tune SpectraVue
to 8.125 MHz manually *or* in SV's "ExtRadio Setup" Select the K3 and
uncheck "HF Tracking Mode."
Note: If you want to use the fre
On Thursday Wilhelm used a Straight-Key to send:
-Original Comment---
> Bob,
> You are OK.
> There is some bleed-through
"Whew!" .:B Thanks Don. And thanks too to Irizzary who replied.
--
Best regards,
Bob KD7YZWin7-64bit + K3
_
, 2012 09:58 AM
To: KD7YZ Bob
Cc: K3 List
Subject: Re: [Elecraft] K3 + SDR-IQ and regular CW operation
Bob,
You are OK.
There is some bleed-through of the IF output during transmit, and I
believe that is what you are seeing.
73.
Don W3FPR
On 12/13/2012 8:16 AM, KD7YZ Bob wrote:
> Howdy K3'
Bob,
You are OK.
There is some bleed-through of the IF output during transmit, and I
believe that is what you are seeing.
73.
Don W3FPR
On 12/13/2012 8:16 AM, KD7YZ Bob wrote:
Howdy K3' people:
I was wondering what precautions are taken, or I need to invoke, when I
use any form of transmitt
Bob,
What are your specific questions? I have the K3 with SDR-IQ here.
I've used it both with the IF connection (as a panadapter) and with
an RF connection (RX Out/RX In and a splitter) for CW Skimmer.
It was in use for about a year but is off-line at the present - I'm
not completely sure the r
Why not publicly? Would be helpful to others, I should think, if it is
possible.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Paul Christensen
Sent: Sunday, August 08, 2010 8:16 AM
To: elecraft@mailman.qth.net
Subject:
16 matches
Mail list logo
