for contesting. FT8 is OK for DX, but when I get serious,
less often these days, I use CW. My station is modest compared to many,
just a K3s and some wire in the backyard; no amp, tower, rhombics, etc.
I do have DXCC mixed, phone, CW, and am short 23 for digital and 21 on
80 for 5BDXCC.
73,
Barry
K3NDM
be
more straight forward.
If you want, I can talk you through it via LL phone. It really
shouldn't take more than about 30-45 minutes to make it all play.
Contact me directly and I'll give you my phone number. But, I don't
function before about noon EDT.
73,
Barry
K3NDM
-- Original
work well this way. This is what I do and have had no problems.
73,
Barry
K3NDM
-- Original Message --
From: "JAY"
To: Elecraft@mailman.qth.net
Sent: 3/12/2019 11:23:52 AM
Subject: [Elecraft] Settings for Digital use
I have the KI03BU installed.No problem RX but unable to
He will also need com0com, a free port replicator that runs really well
with Win4K3. I have a half dozen virtual ports defined and have run with
as many as 4 at a time with no noticeable issues.
73,
Barry
K3NDM
-- Original Message --
From: "Mark Musick"
To: "roc
m overseas, avoid them.
Barry W2UP
Michael Walker wrote
> What has worked for me is make sure that Elecraft tags it as:
>
> "Amateur Radio being returned from Warranty Repairs".
>
> The tricky part is if they insure it for full value. CRA sometimes sees
> that as a valu
Paul,
You are correct the K3s does have a built in sound card and it can
obviate the need for a SignaLink interface. However, you can just use
the radio's VOX vice computer controlled PTT. It works fine this way.
This is what I do.
73,
Barry
K3NDM
-- Original Message --
From
. Have fun.
73,
Barry
K3NDM
-- Original Message --
From: "Doug Turnbull"
To: "Petr, OK1RP/M0SIS" ; elecraft@mailman.qth.net
Sent: 4/16/2019 9:16:34 AM
Subject: Re: [Elecraft] K3 SignaLink & FT8 Question
Petr, I have no idea how the threads are combined. I
to make play other than just setting it up.
73,
K3NDM
Barry
-- Original Message --
From: "Richard Thorne"
To: "Elecraft Reflector"
Sent: 5/28/2019 7:54:42 PM
Subject: [Elecraft] K3S: CW and Digital Interface
When I had a K3 I used a Microham microKeyer II to handle
Olli,
You are correct. He did give the answer. Mea culpa. Somehow, I
missed that.
73,
Barry
K3NDM
-- Original Message --
From: "Oliver Dröse"
To: elecraft@mailman.qth.net
Sent: 5/31/2019 1:35:02 PM
Subject: Re: [Elecraft] The K4's new noise reduction
Didn't Wayne a
Wayne,
Will this be implimented for the K3/K3s also??
73
Barry
K3NDM
-- Original Message --
From: "Wayne Burdick"
To: "Elecraft Reflector"
Cc: elecraft...@groups.io
Sent: 5/31/2019 1:11:23 PM
Subject: [Elecraft] The K4's new noise reduction
We've recently s
uld also put in some EV charging stations. "Greene" county is a
misnomer.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Wayne must have been the first one to get his deposit in at Dayton... :-)
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
updates. Setting up a Linux
machine and VMs is just too much work!
73,
Barry
K3NDM
-- Original Message --
From: "Dave Cole (NK7Z)"
To: elecraft@mailman.qth.net
Sent: 6/9/2019 10:14:55 AM
Subject: Re: [Elecraft] K3S - Win4K3Suite - SDRPlay
Gwen,
I too am on Windows 7 for
and receive K3 band,
frequency, and mode data. Using Win4K3 suite with com0com does make that
easy and you could use what you describe using a pair of virtual ports.
Should work well.
73,
Barry
K3NDM
-- Original Message --
From: "Bob McGraw K4TAX"
To: elecraft@mailman.qth.net
Sent: 5
pair to Skimmer so it integrates and
plays with everything else. I have played with a few different
configurations and feel comfortable that this is the easiest way to go
and it yields great flexibility with stability. Best of Luck.
73,
Barry
K3NDM
-- Original Message --
From: "
and whatever you want.
Hopefully, this whole thing helps.
73,
Barry
K3NDM
-- Original Message --
From: "Peter Dougherty"
To: "Barry" ; "Bob McGraw K4TAX"
; elecraft@mailman.qth.net
Sent: 5/23/2019 10:00:14 PM
Subject: RE: [Elecraft] Connecting SDRPlay t
, but there is no easy single answer. I do believe most
everyone is operating as I do, within the SSB filters of their radio.
73,
Barry
K3NDM
-- Original Message --
From: "Frank O'Donnell"
To: "elecraft@mailman.qth.net"
Sent: 5/5/2019 5:54:34 PM
Subject: [Elecraft] K3S filter
Whoever designs such a radio could save a few bucks by not putting a speaker
in it.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
down to 200 Hz. And the the tones can go as high as
the sending stations transmitter will allow, typically less than 2.7-2.8
KHz. This assume that that you have tuned your radio the the FT8/FT4
frequencies correctly.
73,
Barry
K3NDM
-- Original Message --
From: "Andy D
ands might be difficult, but it may be the correct
approach, However, it will require being able to "see" both sidebands on
an equal basis.
73,
Barry
K3NDM
-- Original Message --
From: "Wes"
To: elecraft@mailman.qth.net
Sent: 8/28/2019 1:45:11 PM
Subject: Re: [Elec
Another thought - oxidation in the ribbon cable connector. I just went
through this with a touchscreen thermostat. Removed the connector from the
PC board and put it back in and all good again.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com
upgrade security on your system, and in today's world, you need the best
security you can find.
73,
Barry
K3NDM
-- Original Message --
From: "Andy Durbin"
To: "elecraft@mailman.qth.net"
Sent: 7/30/2019 3:02:28 PM
Subject: [Elecraft] Windows Update and the K3 USB Audi
I suspect that you could do as you suggest, but it is almost mindlessly
simple to use an SDRPlay driving Win4K3 Suite. You have mouse control
and other features.
73,
Barry
K3NDM
-- Original Message --
From: "Conrad PA5Y"
To: "elecraft@mailman.qth.net"
Sent:
Thought it was an amusing typo in your original post, but apparently not.
It's Begali. No N, unless you're referring to the very rare Indian-made
key.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft
and water
really does a number on boat stuff. Only suggestion is that your
stainless be marine grade.
73,
Barry
K3NDM
-- Original Message --
From: "Richard"
To: "Elecraft Reflector"
Sent: 11/2/2019 10:16:24 AM
Subject: [Elecraft] Turnbuckle Threads
For stainless s
that wasn't right. It turned out to be a bad capacitor, BUT the tech was
the designer, Wayne. My experience with Elecraft has been over the top,
but dealing directly with the developer has been something else.
73,
Barry
K3NDM
-- Original Message --
From: "Michael Walker"
To:
, test out his developments, etc. However, I am really glad there is
someone in the company like him.
73,
Barry
K3NDM
-- Original Message --
From: "Michael Walker"
To: "Barry"
Cc: "Fred Soop" ; "Elecraft@mailman.qth.net"
Sent: 12/11/2019 2:39
about a 3% degradation - not bad!
It's a real shame that most device manufacturers don't tell you any of this,
especially with the trend of making batteris in cell phones, laptops, etc.,
not user-replaceable.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com
easier.
73,
Barry
K3NDM
-- Original Message --
From: "Don Wilhelm"
To: "Olof Lundberg" ; elecraft@mailman.qth.net
Sent: 11/26/2019 12:14:02 PM
Subject: Re: [Elecraft] K3S WSJT and FT8
Olof,
Are you connected to the K3S using the USB cable?
If so, check the s
works well and can control the radio.
73,
Barry
K3NDM
-- Original Message --
From: "B Deuby"
To: elecraft@mailman.qth.net
Sent: 10/7/2019 8:11:24 PM
Subject: [Elecraft] K3 CW Text Decoding
I am unable to get the Text Decode function on my K3 to produce accurate
results. I hav
just the receiver audio. But, that was not a rigorous
test and someone who is really interested can do the follow up.
73,
Barry
K3NDM
-- Original Message --
From: "David Gilbert"
To: "rich hurd WC3T"
Cc: elecraft@mailman.qth.net
Sent: 10/8/2019 12:23:13 AM
Subject:
when I'm tired, it does better than I do. Do keep us up
with whatever you find.
73,
Barry
K3NDM
-- Original Message --
From: "Edward R Cole"
To: "Elecraft Reflector"
Sent: 10/9/2019 2:43:58 PM
Subject: Re: [Elecraft] K3 CW Text Decoding
Barry,
I had CW skimmer
the bill.
Anyone?
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Try Elecraft. That's where I got mine.
73,
Barry
K3NDM
-- Original Message --
From: "Richard Donner"
To: "Elecraft@mailman.qth.net"
Sent: 1/25/2020 4:51:03 PM
Subject: [Elecraft] anyone recommend where to buy a SERIAL to USB cable
for a k3
Hi
I ha
Frank,
My read of your comments is that it is all OK. If you are getting
power out, you're on the air. Nothing to do but operate. Pick some
strong station calling CQ and give him a call. And, see what happens.
There should be nothing else on the rig to fiddle with at this time.
73,
Barry
Frank,
Not all of us have your backyard, like me. Using two different
polarization will get you there also, And, cross polarization will
enhance decoupling between the antennas.
73,
Barry
K3NDM
-- Original Message --
From: donov...@starpower.net
To: elecraft@mailman.qth.net
Sent
really clear after your 3rd or so contact. :-) Have fun.
73,
Barry
K3NDM
-- Original Message --
From: "Frank O'Donnell"
To: "Barry" ; "elecraft@mailman.qth.net"
Sent: 1/28/2020 3:00:01 PM
Subject: Re: [Elecraft] K3S, VOX and WSJT-X?
Barry,
Thanks. I wa
. Nothing fancy! One caution: watch your PA temperature. It will
definitely rise.
73,
Barry
K3NDM
-- Original Message --
From: "Frank O'Donnell"
To: "elecraft@mailman.qth.net"
Sent: 1/28/2020 1:22:43 AM
Subject: [Elecraft] K3S, VOX and WSJT-X?
I've successfully
these sorts of things.
73,
Barry
K3NDM
-- Original Message --
From: "Bob McGraw K4TAX"
To: "Elecraft Reflector" ;
"elecraft...@groups.io"
Sent: 1/18/2020 1:44:49 PM
Subject: [Elecraft] OT - Radio interference from Solar Panels
The Swedish Electrical
write down what you've set up for reference; it will
save you in the future.
73,
Barry
K3NDM
-- Original Message --
From: "Aubrey Mason"
To: "Elecraft Reflector"
Sent: 1/8/2020 4:28:56 PM
Subject: [Elecraft] Fw: KX3 with KX3 Companion application
___
Aubrey,
A point that I missed, make sure your mic input is actually stereo
and not mono, many are. It must be stereo.
73,
Barry
K3NDM
-- Original Message --
From: "Don Wilhelm"
To: "Aubrey Mason" ; "Elecraft Reflector"
Sent: 1/8/2020 4:51:04 PM
S
If Elecraft makes the K4 I data avail in MME format, there will be no
need to implement these on the radio itself. They can all reside on the
computer that is used for control and whatever else. It will be
basically like running with a KX3.
73,
Barry
K3NDM
-- Original Message --
From
850 814 8339
Sent from my iPhone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
850/722/0231
Sent from my iPhone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
of the things I do is use Skimmer to spot what it decodes to the
Clublog spotting window on Win4K3. This tells me what my antenna is
picking up. Uing general spotting just tells me what others are hearing
which I may not hear.
73,
Barry
K3NDM
-- Original Message --
From: "Ted Roy
, but at that time, 2 guys
(DJ1YFK and YT7AW) broke 200 WPM. When in my prime, I hit about 120 WPM
running RUFZ. 200 sounds like a buzz saw to me. Maybe these guys have
narrower gaps in their synapses?
Barry W2UP (HST 2011 Bronze medal in RUFZ)
--
Sent from: http://elecraft.365791.n2.nabble.com
a SSB radio for 2-3 years, so did CW only. Found
the QRQ guys (in the early 70s) at the low end of 40 CW and programs were
available, I found I hit a wall at ~100 WPM, despite practice. Other than
contesting, I really haven't been active for the last 5-10 years and my
speed has significantly d
I use none. The K3s has an IF out that requires no protection. I've been
doing this for over a year with no problem. I drive the panadapter in
the Win4K3 suite with it, and it controls what I see out of the RSP.
Works like a champ with nothing special to do.
73,
Barry
K3NDM
-- Original
are going to need to account for the fact that each has a slightly
different calibration frequency. It's no big deal, but it should be set
for your specific radio.
73,
Barry
K3NDM
-- Original Message --
From: "Bob McGraw K4TAX"
To: "Don Sayler"
Cc: "Elecraft R
The manual says, "Normally, the left channel is
main receiver audio, and the right channel is sub
receiver audio (if applicable). "
So is the left channel (main) the tip and the right channel (subrcvr) the
ring?
Tnx,
Barry W2UP
--
Sent from: http://elecraft.365791.n2.
t get warm, even
at QRQ :-)
Barry W2UP
donovanf wrote
> This is probably unrelated to your capacitor failure, but your
> "big hulking linear supply" is underrated for the K3 unless you
> run your K3 at less than full output power. The RS-20A might
> be okay for SSB, but c
something worthwhile. ;-)
73,
Barry
K3NDM
-- Original Message --
From: donov...@starpower.net
To: elecraft@mailman.qth.net
Sent: 3/31/2020 3:39:44 PM
Subject: Re: [Elecraft] Transceiver Test Bed at W3LPL
Hi Jim,
Very good ideas! I'll also use my FTdx5000s as QRM radios and
also try the K3s
to the trouble of swapping out filters.
However, there are a number of hams who will disagree with me.
73,
Barry
K3NDM
-- Original Message --
From: "Gary Hunt via Elecraft"
To: elecraft@mailman.qth.net
Sent: 3/31/2020 2:55:44 PM
Subject: [Elecraft] Subject: K3 SSB filters
Something that I think is being missed. Didn't Elecraft address all of
this in the K3s upgrade and design? I do contest using SSB, and haven't
seen a problem with my K3s.
73,
Barry
K3NDM
-- Original Message --
From: "Igor Sokolov"
To: elecraft@mailman.qth.net
Sent: 3/29/20
of
paper, for example) to dampen the induced vibration.
Barry W2UP
Does anyone have a way to dampen the physical hum generated by the
transformer in an RS-35M PS?
This really is just transformer hum I’m hearing, not signal hum…my station
is fully bonded and as a result quiet in that regard. Most
, another reason to go
PC..
73,
Barry
K3NDM
-- Original Message --
From: "Tommy Judson via Elecraft"
To: elecraft@mailman.qth.net
Sent: 5/1/2020 8:38:35 AM
Subject: Re: [Elecraft] Windows Needed
Good Morning Clay,
Thank you for the offer to chat. I’m overwhelmed with the info
capability.
Personally, I read this "forum" on Nabble, but it's a poor interface,
breaking up email threads into multiple subjects and not putting them in the
correct categories.
Barry W2UP
I still wonder why Elecraft a forward looking company uses a "reflector"
like mailman rath
in business. Set your software to the external sound card and
start to operate.
73,
Barry
K3NDM
-- Original Message --
From: "MIKE W1SRR"
To: "Elecraft Reflector"
Sent: 5/4/2020 12:21:10 PM
Subject: [Elecraft] KX3 digital 0ps?
so rookie question as I jus
Thanks Don.
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
figure it out. Another buddy picked up on the fact that time
was not set correctly and he fixed it after which decodes started. I
missed that one. So, just get the correct time and I infer that should
fix your problem. You only need tro be seconds off to not work.
73,
Barry
K3NDM
.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
With ever increasing volume, sure to increase exponentially when the K4's
start coming, is it time to replace this list with a forum?
Yes, emails can be filtered, but does it make sense to download hundreds of
emails when only a handful are of interest due to your equipment inventory?
Barry W2UP
My point is there's no need to hit a DELETE key in a forum with a list of
subject titles that one may choose to read, or not. Email lists are 1980s
technology.
Barry W2UP
Nr4c wrote
> Hmmm... “DELETE” is your friend.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>>
David Gilbert-2 wrote
> And as others have pointed out, there is already a K4 forum on .io .
> why doesn't that work for you??
>
> Dave AB7E
Because I'm not looking for a K4 forum. I'm looking to AVOID all the K4
traffic that will be comping.
Barry W2UP
--
Sent from: htt
I use Nabble, too. It's better than email, but it's been broken for years.
Often, responses to a topic is split from the original, and 99% of posts
wind up in the main section, rather than parsed to the subheadings by radio.
Barry W2UP
John_N1JM wrote
> I use and go to Nabble. No emails f
On a semi-related note, I don't understand why manufacturers continue to put
a mic jack, with its overly bulky mating connector, on the front panel. It
always gets in the way.
Barry W21UP
--
Sent from: http://elecraft.365791.n2.nabble.com
You could use your keyboard with N1MM. Won't cost you anything.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Remember the early days of transistor radios and how they advertised the
number of transistors on the case? The more the better! Turns out some of
those with big numbers had transistors not connected to anything.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com
Try some ATT.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Listening to the recording, I find the thumping during xmit very annoying.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Oops, sorry, I listened to the recording before reading the message!
Double oops. Me, too!
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
I saw the K4 at Dayton last year. The remote connection was via Ethernet and
directly between radios with no interface boxes such as remoterig. So
unless there's also a K3 remote mode via serial port, too, the answer would
be no.
Barry W2UP
Barry
--
Sent from: http://elecraft.365791.n2
available; I wouldn't go more than about 25 feet which
should put the feed about 31 or so feet over the water,m close to a 1/4
wave on 40. This arrangement will allow all band operation above 40 with
a K3 as the tuner is just plain magic.
73,
Barry
K3NDM
-- Original Message --
From: "R
. Like I said at the top, EE is an art
and not science and this artist has chosen to approach a solution swet
this way. I'm quite sure there are other artists who may have other
compromises.
73,
Barry
K3NDM
-- Original Message --
From: "Jim Brown"
To: elecraft@mailman.qth.net
This will look like the 23' HF whip used by boaters and the wire can be
barely seen. I can't see how this would look much worse than what
boaters already do for HF except this will be ground independent.
-- Original Message --
From: "W2xj"
To: "Barry"
Cc: "
in. Each
will be a compromise. Look to this reflector to see what I mean. Each
ham has his own idea of what needs to be done; it gets down to how you
interpret the requirement set.
73,
Barry
K3NDM
-- Original Message --
From: "Don Wilhelm"
To: "Barry" ; elecraft@
Phil,
I think I understand your point. I think I can live with it.
However, I never studied philosophy.
73,
Barry
K3NDM
-- Original Message --
From: "Phil Hystad via Elecraft"
To: "Barry"
Cc: elecraft@mailman.qth.net
Sent: 6/10/2020 1:50:48 PM
Subjec
and there may be only
answer to the equation, but that wasn't the world I was living in; I
could have many different solutions based on the requirements. This is
the point I was trying to make.
73,
Barry
K3NDM
-- Original Message --
From: "Don Wilhelm"
To: elecraft@mailm
, but only in data interpretation and not design. Sorry you couldn't
be more wrong.
73,
Barry
K3NDM
-- Original Message --
From: "Jim Brown"
To: elecraft@mailman.qth.net
Sent: 6/10/2020 1:53:14 AM
Subject: Re: [Elecraft] K3 on motorboat.
On 6/9/2020 3:54 PM, Barry wrote:
EE
Don,
I never got the chance to work as a scientist. It might have been
fun. I did enjoy doing designs to products, but there were times when I
was ready to change career field. :-\
73,
Barry
K3NDM
-- Original Message --
From: "Don Wilhelm"
To: "Barry" ; elec
Mark,
Where did you find the utility? I just search the web and the
Elecraft site for the utility, but it never showed up.
73,
Barry
K3NDM
-- Original Message --
From: "Mark Forsyth"
To: "Grant Youngman"
Cc: "Elecraft Refl"
Sent: 6/13/2020 12:1
or use a
ground independent antenna like a dipole variant. See the note I just
wrote to Peter that should be here on the reflector.
73,
Barry
K3NDM
-- Original Message --
From: "M. Bottles via Elecraft"
To: "Peter Kaletsch"
Cc: "elecraft@mailman.qth.net&qu
schemes in both brackish and saltwater.
73,
Barry
K3NDM
-- Original Message --
From: "John Langdon"
To: "j...@audiosystemsgroup.com" ;
"elecraft@mailman.qth.net"
Sent: 6/8/2020 9:09:51 PM
Subject: Re: [Elecraft] K3 working on motorboats - possible
The
LM400.
The SWR will be high on most of the bands but should be in the Elecraft
range, more importantly, is containing the losses associated with high
SWR.
73,
Barry
K3NDM
-- Original Message --
From: "Peter Kaletsch"
To: "elecraft@mailman.qth.net"
Sent: 6/8/202
Yes, this is the answer. The original KSYN boards didn't have a powerful
enough processor for high speed CW.
My K3 works just fine for my weekly QRQ sked at about 60 WPM, and at least
one other in the group runs a K3.
Barry W2UP
Klaus Koppendorfer wrote
> Put KSYN3A Synthesizer Upgrade Boa
There's no place for anonymous posting, either. How hard is it to include
your name and/or call?
Barry W2UP
Elecraft mailing list wrote
> Listen.
> This is no place for political BS. I don’t care if you are right, left, or
> in the f’ing middle. This is a place to discuss Elecraft
Just another reason why a forum makes so much more sense than pushing out
emails to everyone.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
they made me go into
medicine.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@
High school in 1975? You're just a kid in ham circles, Wayne :-)
Barry W2UP (HS class of '74)
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Nabble has been unavailable (DNS error) to read the kist for a few
days. Temporary glitch or is it gone forever?
Barry W2UP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
,
Barry W2UP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
Thanks for the replies. I'll pass it along to the station owner.
73,
Barry W2UP
On 11/28/2021 11:27 AM, Geert Jan de Groot wrote:
Was operating remote in CQWW using a K3 and RCforB.? I was unable to
adjust the sidetone volume, which I found too loud.? The host is using
Line Out to connect
Glad to see that I am not the only Steely Dan fan. And 40m is pretty good
too !
73
Barry Simpson VK2BJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
Is there a complete, in one file, list of all K2 commands and queries
including
the PA, SSB, DSP, etc modules?
Thanks for any info.
Steve, AE2G
K2 s/n #377
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Yes, currently the K3 rx audio passband rolls off below 250hz. It's a
limitation in DSP that hopefully will get opened up soon.
No, it's not an issue of what communications receivers do. The Orion
passband is flat down to 50hz.
73,
Barry N1EU
pappy_c wrote:
That is what communications
antenna with the main receiver, you
need the KXV3. It doesn't matter whether or not the KAT3 is
installed.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
filter edge above 250hz
for opposite sideband rejection. The dsp filtering slope is very
steep. You can set the Orion lower filter edge to 50hz and it sounds
great.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
, this thread was about receive, not transmit.
73,
Barry N1EU
--
View this message in context:
http://www.nabble.com/K3-2.7kHz-filter-DSP-FC-tp16160748p16182733.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing list
Post
the countdown begins.
Barry Simpson VK2BJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
and nylock nut or do better by purchasing a
Linemaster GEM-V footswitch or similar.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
301 - 400 of 1488 matches
Mail list logo