On 07/05/2018 12:32 PM, Dewey Garrett wrote:
In <5b3e4726.5080...@pico-systems.com> Jon Elson
writes:
Any suggestions?
docs section on updating 2.7 to master (2.8~pre):
http://linuxcnc.org/docs/devel/html/getting-started/updating-linuxcnc.html
Thanks, this is what I was looking for!
Well,
On 5 July 2018 at 20:28, Peter C. Wallace wrote:
> This should also work for any 1 turn absolute encoder (like the common Hall
> effect encoders from AMS etc)
It should, but the drivers need to be modified to support it. And I
don't have any to test it with.
--
atp
"A motorcycle is a bicycle w
On Thu, 5 Jul 2018, andy pugh wrote:
Date: Thu, 5 Jul 2018 20:18:37 +0100
From: andy pugh
Reply-To: EMC developers
To: EMC developers
Subject: [Emc-developers] Absolute resolvers
Using the position.txt file and a tweak to the Mesa resolver driver I
have had good results making my lathe work
Using the position.txt file and a tweak to the Mesa resolver driver I
have had good results making my lathe work as if it has absolute
encoders.
Does anyone have any opinions about whether I should, or should not, push it?
Naturally it would need docs, but you basically just need to connect
joint
On 17 April 2017 at 15:48, andy pugh wrote:
> was finally prompted to try to get
> Touchy to report the current override value in the case where it was
> set from another source.
>
> I added a couple of lines around line 798 in touchy.py
>
> + self.fo_val = s.feedrate * 100
> +
In <5b3e4726.5080...@pico-systems.com> Jon Elson
writes:
>Any suggestions?
docs section on updating 2.7 to master (2.8~pre):
http://linuxcnc.org/docs/devel/html/getting-started/updating-linuxcnc.html
--
Dewey Garrett
-
On Thursday 05 July 2018 12:46:55 andy pugh wrote:
> On 5 July 2018 at 17:44, Gene Heskett wrote:
> > The biggest thing I can think of is the joint-axis merge, which is
> > still a bit incomplete, requiring matching, duplicate entries for
> > some of the vars used in the .ini file.
>
> They are n
On 5 July 2018 at 17:44, Gene Heskett wrote:
> The biggest thing I can think of is the joint-axis merge, which is still
> a bit incomplete, requiring matching, duplicate entries for some of the
> vars used in the .ini file.
They are not duplicates. Though with a trivkins machine the values
will
On Thursday 05 July 2018 12:28:22 Jon Elson wrote:
> Are there up-to-date release notes for LinuxCNC? There is a
> release notes file in the Wiki, but the last entry is
> February 2016 (2.7.4)! There seems to be some
> incompatibility with my configs files sets and the 2.8
> release, and I need
Are there up-to-date release notes for LinuxCNC? There is a
release notes file in the Wiki, but the last entry is
February 2016 (2.7.4)! There seems to be some
incompatibility with my configs files sets and the 2.8
release, and I need to make whatever changes are required.
I see a lot of di
10 matches
Mail list logo