Safety Engineer position opening at Bose

Hello Ladies and Gents, I have an immediate opening for a product Safety Engineer here at Bose. This is a fulltime permanent position and is the result of department growth and not due someone leaving. You can view the position at the following website

RE: Accredited Lab / Data Question [R&TTE Directive]

You are right as along this is for the self certification process. If a notified body is involved as required for certain annexes of the R&TTE than it may become an issue, since the NB may question the qualification of the test lab / test data. Regards Lothar Schmidt Technical Manager

RE: Accredited Lab / Data Question [R&TTE Directive]

First I think we need separate data from laboratory accreditation. Data is not really ‘accredited or unaccredited”, it is simply taken by an accredited lab or by an unaccredited lab. The value of that data may simply be given more consideration by those accepting the accreditation schemes in plac

Re: Conducted Emissions on Ethernet

In message , dated Thu, 13 Apr 2006, jim.hulb...@pb.com writes >We have an ethernet port to which is connected a CAT5 cable. When this >cable is routed through an ISN per EN 55022 for conducted emissions >measurements, the port is unable to function. What experience have >people had with ISNs

RE: NEBS requirements interp

Brian, SR-3580 defines which tests are part of each NEBS level. You can check the definition there, but for level 3 assume pretty much everything in GR-1089 and GR-63! That being said, GR-1089 has a matrix in Appendix B which defines what the appropriate tests are for the various port types. For

Re: NEBS requirements interp

On 4/13/2006, Brian O'Connell wrote: A customer has given me GR-1089 and GR-63 "compliance" requirements of Criteria Level 3 for Port Types 2 and 4. GR-63 and 1089 both mention these SR-3580 levels, but do not seem to specify specific performance requirements for three distinct levels. I am no

Accredited Lab / Data Question [R&TTE Directive]

Colleagues, An associate asked me if I would post the following question: Question - If an unaccredited lab takes test data and submits the data to an 17025 accredited lab, who then reviews and approves it, is it considered accredited data and / or would it be acceptable for demonstrating comp

NEBS requirements interp

Good People, A customer has given me GR-1089 and GR-63 "compliance" requirements of Criteria Level 3 for Port Types 2 and 4. GR-63 and 1089 both mention these SR-3580 levels, but do not seem to specify specific performance requirements for three distinct levels. I am not certain how to map the "

RE: Conducted Emissions on Ethernet

From: jim.hulb...@pb.com [ mailto:jim.hulb...@pb.com] Sent: Thursday, April 13, 2006 7:38 AM To: emc-p...@ieee.org Subject: Conducted Emissions on Ethernet We have an ethernet port to which is con

Re: Conducted Emissions on Ethernet

Jim, I am not a test-house, so I don't have experience with various ISNs. However, I have done a considerable amount of work in common-mode voltage and current measurements, as well as investigating imbalance (i.e. mode conversion) in differential-signaling, especially in the hi-speed signalin

Connector Query

Dear Listers, ITT Cannon make a sub-miniature D type connector that can host a high voltage contact (2800 v rms at sea level). I have attempted to get some basic additional safety related data for the sub-miniature D type connector when using the high voltage contacts from both distributors and IT

RE: Unique time thread

Return Receipt Your RE: Unique time thread document:

RE: Unique time thread

Return Receipt Your RE: Unique time thread document:

Conducted Emissions on Ethernet

We have an ethernet port to which is connected a CAT5 cable. When this cable is routed through an ISN per EN 55022 for conducted emissions measurements, the port is unable to function. What experience have people had with ISNs in this application, or what experience do people have with the alternat

RE: Unique time thread

Return Receipt Your RE: Unique time thread document:

Re: Connector Query

In message <7303a459c921b5499af732cceead2b7f212...@craws161660.int.rdel.co.uk>, dated Thu, 13 Apr 2006, "Speakman, Jim" writes >a) what clearance distances apply (pin to pin and pin to shell) >b) what creepage distances apply (pin to pin and pin to shell) >c) what CTI applies over the relevant

RE: Unique time thread

Return Receipt Your RE: Unique time thread document:

RE: Unique time thread

Return Receipt Your RE: Unique time thread document:

RE: UL approvals

Does anyone have this list of states which require an NRTL mark? _ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Tyra, John Sent: 11 April 2006 14:40 To: peter merguerian; Richards, Carl; emc-p...@ieee.org Subject: RE: UL approvals You can import the product into the U