[Bulk] Re: EMI Receivers

Is this not getting far afield from the original topic? --- On Fri, 11/28/08, John Woodgate wrote: > From: John Woodgate > Subject: Re: EMI Receivers > To: emc-p...@ieee.org > Date: Friday, November 28, 2008, 2:13 PM > In message > , dated > Fri, 28 > Nov 2008, Ken Javor > writes: > > > >T

RE: OK, what's going on?

resuldted in the units being produced that no longer meet the limits? It could be that a prototype was the only unit tested and a production unit never sampled. There are a multitude reasons for non-compliant products being on the market. Not all are devious. Pryor McGinnis c

RE: request sources for UL and/or IEC accessibility probe (test finger)

You might try ED&D at http://www.productsafet.com/pages/main.html Pryor McGinnis paul.j.sm...@teradyne.com wrote: Folks What sources are out there to purchase an articulated UL and/or IEC accessibility probe (test finger) from the various UL, IEC and other product safety stand

RCIC Website?

What happened to the RCIC Website? Pryor --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to:

Re: RE: Fish paper

GO FISH! - Original Message - From: Gary McInturff To: ; ; Cc: Sent: Friday, October 26, 2001 10:42 AM Subject: RE: RE: Fish paper > > Okay, I've pretty much Haddock! - I'm going to Ivars for fishpaper and > chips! > Gary > > -Original Message- > From: peter_denea...@atg.pac

Re: NIMDA virus

, Pryor McGinnis - Original Message - From: Stuart Lopata To: emc Sent: Thursday, September 20, 2001 10:47 AM Subject: NIMDA virus > > Yesterday our office was shut down all day because of the 'NIMDA virus'. > Has anyone else encountered this virus? > > I would like

Re: Calibration of test equipment

At the least, I would expect the test eqipment parameters/characteristics to be checked via other test equipment that is in current calibration traceable to NIST or NAMAS. This check would require a documented procedure. - Original Message - From: Brian Harlowe To: Sent: Monday, Februa

Re: Final EMC Testing In-House

Don't forget to ask for calibration certs for purchased equipment. Cal Certs are not automatic with the purchase of test equipment. - Original Message - From: Price, Ed To: ; Sent: Thursday, February 22, 2001 3:19 PM Subject: RE: Final EMC Testing In-House > > Joe: > > You also shoul

Re: Taiwan Contact Point

As I understand it, under the APEC MRA you could get BSMI accreditation via NIST/NVLAP, test results from an accredited lab in the US is acceptable; however, you still need a representative in Taiwan. - Original Message - From: Clement Dave-LDC009 To: 'John Cronin' ; Sent: Tuesday, Febr

Re: LV Directive

Sorry about that. I forgot to identify the device. The device is a detector for leaking refrigerant in a commercial environment. - Original Message - From: Pryor McGinnis To: Sent: Thursday, February 01, 2001 2:48 PM Subject: LV Directive Hello All, A client has a device that

LV Directive

Hello All, A client has a device that operates at 20 Vac, >1 A and is supplied by a CE Marked "Wall Plug In" transformer. His question: Does the Low Voltage Directive apply to his device or just the plug-in transformer? If Low Voltage Directive does not apply to his device, what safety regulatio

Regulatory Requiements for Various Countries

I have a client who wishes to ship Class A ITE equipment into various countries. Attached is a list of countries. Does anyone have a listing for the various countries or know of a source for this info? Thanks in advance. Best Regards, Pryor McGinnis c...@prodigy.net www.ctl-lab.com

Dale Albright

I need the email address or phone number of Dale Albright. The Email address I have does not appear to work. Best Regards, Pryor McGinnis c...@prodigy.net www.ctl-lab.com

Re: Test Laboratory/Tests Equipment

I apologise to all. The correct URL is: www.ctl-lab.com - Original Message - From: Pryor McGinnis To: emc-p...@ieee.org Sent: Wednesday, January 24, 2001 4:39 PM Subject: Test Laboratory/Tests Equipment Hello All, I know that this is not a vehicle for advertising

Test Laboratory/Tests Equipment

interested, Please contact me via phone (864) 843-1604; Fax (864) 843-1812; or email c...@prodigy.net Best Regards, Pryor McGinnis c...@prodigy.net www.ctl-lab.com

Telecom housing units

Does anyone know of any EU requirements/certifications necessary for Telecom Housing Units as outlined below? Thanks in advance, Pryor McGinnis c...@prodigy.net Product Specification Exterior Dimensions: 10' wide x 12 long x 9' 6" high Interior Dimensions: 9'3''

Re: Singapore

Try: link to the "Singapore Productivity and Standards Board" PSB. http://www.psb.gov.sg/awards/certification/sqm_procedure.html - Original Message - From: Bill Somerfield To: Sent: Tuesday, December 19, 2000 6:31 AM Subject: Singapore > > Hello Group, > > Could anyone point me in

UPS FUNCTIONAL TESTING

Regards, Pryor McGinnis c...@prodigy.net www.ctl-lab.com --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: majord...@ieee.org with the sin

Re: FCC Part 15 Class B

You can issue a Declaration of Conformity providing the testing is conducted by an accredited laboratory. Pryor McGinnis Compliance Test Labs - Original Message - From: Courtland Thomas To: emcpost Sent: Tuesday, November 28, 2000 1:20 PM Subject: FCC Part 15 Class B > > Hello

Re: BCIQ Taiwan

Peter, You are confusing Korea with Taiwan. Compliance Test Labs has been accredited with BSMI for a long time. BCIQ changed their name to BSMI. BSMI is the EMC agency for Taiwan. KTL is an authorized lab for Korea. I am not aware of any other lab in North America that has been authorized by

Virus

If you receive an email with subject "US PRESIDENT AND FBI SECRETS" DO NOT OPEN IT! IT IS A VIRUS It will overwrite files with extensions .vbs,.vbe, .js,.jes,.css,.wsh, .sct,.jpg,.jpeg,.mp3, and .mp2. Best Regards, Pryor McGinnis c...@prodigy.net www.ctl-lab.com

EMC Laboratory

If anyone is interested in purchasing a well equipped, accredited EMC Test lab with a 10 m OATS & 3 m semi-anechoic chamber, contact: Sunbelt Business Brokers Mr. Cecil E. Martin cmar...@sunbeltnetwork.com or contact me off line and I will put you in contact with the owners. --

Re: Conducted Emissions on Telecom Ports

nd its digitized Voice over Internet > Protocol (Voip) and does all of the phone stuff and makes the actual > metallic connection. That "birdge" has the only telecommunication ports on > it. > Gary > > > -Original Message- > From: Pryor McGinnis [mailto:c...@prod

Re: Conducted Emissions on Telecom Ports

isinterpreting something here? Thanks Pryor - Original Message - From: Gary McInturff To: 'Pryor McGinnis' ; Pettit, Ghery ; ; Sent: Tuesday, September 05, 2000 10:54 AM Subject: RE: Conducted Emissions on Telecom Ports > Define telecom port. > A LAN port isn't neccessaril

Re: Why routine hipot is required.

Mike, I made the same mistake. The power supply was recognized. - Original Message - From: Pryor McGinnis To: Mike Morrow ; EMC Society Sent: Friday, September 01, 2000 12:31 PM Subject: Re: Why routine hipot is required. > Mike, > > Back in my days as Compliance Engineer

Re: Why routine hipot is required.

Mike, Back in my days as Compliance Engineer for AT&T Global Information Solutions (NCR), I was successful in obtaining UL/CSA waiver for production line hipot testing of the end product on the basis of using a listed power supply that had already been subjected to hipot as a part of the power su

Re: choke

bloqueador - Original Message - From: Luciana Firmino To: Sent: Wednesday, August 02, 2000 2:43 PM Subject: choke Hey Folks: I´m a beginner at the list (and the subject) and I have a doubt about the translation of the word "choke" into portuguese, and also about if is there any form

Re: EN 55022 Conducted Emissions

Yes! - Original Message - From: Brooks, Barbara To: Sent: Wednesday, August 02, 2000 7:55 AM Subject: EN 55022 Conducted Emissions > > I have had an inquiry that I am not sure of the answer and I was hoping that > someone could provide me with an answer. > > If an EUT is DC powered de

Re: TCBs are designated

Sorry, My mistake! The links will take you to the Public Notice if you have the complete URL on one line. The way I received the message, the last 4 to 5 characters of the URL were on the second line. - Original Message - From: To: Sent: Tuesday, June 06, 2000 9:04 AM Subject: RE: TCB

Re: TCBs are designated

None of these links work for me. - Original Message - From: To: Sent: Tuesday, June 06, 2000 9:04 AM Subject: RE: TCBs are designated > > The correct link is > http://www.fcc.gov/Bureaus/Engineering_Technology/Public_Notices/2000/da0012 > 23.txt >

TAD 8465

Is anyone familiar with TAD 8465. I think it is a Bell Canada ESD Requirement. Where can copies be obtained? Best Regards, Pryor McGinnis c...@prodigy.net www.ctl-lab.com

Re: Contact at the FCC for Part 15C

Try Rich Fabina (301) 362-3021 Pryor McGinnis c...@prodigy.net www.ctl-lab.com - Original Message - From: Mike Morrow To: EMC Society Sent: Thursday, May 11, 2000 12:15 PM Subject: Contact at the FCC for Part 15C > I'm looking for the name of an individual at the FCC w

Re: Antenna factors to be used for NSA measurement

I agree with the guidelines stated. Just wanted to point out a problem I had with VCCI on the last submission for registration of our oats. The initial submission used both horizontal and vertical AF for site attenuation measurements; however, VCCI would only accept horizontal AF for both measure

Re: EMC and product safety split?

I think it is great the way it is. I am interested and involved with all regulatory issues. Pryor McGinnis c...@prodigy.net - Original Message - From: Rich Nute To: Product Safety Technical Committee Sent: Sunday, March 12, 2000 3:15 PM Subject: Re: EMC and product safety split

Re: China Packaging/Crating Requirements

I believe the problem is with wood crating and shipping materials coming out of China. The wood must be treated and certified to be free of insects, etc., so it is cheaper to fab metal pallets than use wood. - Original Message - From: Scott Douglas To: ; Sent: Monday, January 17, 2000

EMC & Product Safety Requirements for ITE in Egypt

Hello All, Does anyone have info, Email Address, WebSite concerning EMC andProduct Safety Requirements for ITE in Egypt? Best Regards c...@prodigy.net www.ctl-lab.com - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.

Re: CFR's

CFR's are available at no charge at http://www.access.gpo.gov/nara/cfr/cfr-table-search.html -Original Message- From: Dick Grobner To: 'emc-p...@ieee.org' List-Post: emc-pstc@listserv.ieee.org Date: Friday, December 17, 1999 2:53 PM Subject: CFR's > >Does anyone out there know if you

Class A or B

purposes. It depends upon where such labs are typically located in Europe. Your opinions would be most appreciated. Best Regards, Pryor McGinnis c...@prodigy.net www.ctl-lab.com

Re: Virus

Pryor McGinnis c...@prodigy.net - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@m

Re: Earth Potential Equalizing

EN 60204-1 Clause 8 covers Equipotential bonding. -Original Message- From: Janne Engström To: emc-p...@majordomo.ieee.org List-Post: emc-pstc@listserv.ieee.org Date: Sunday, November 21, 1999 1:26 PM Subject: Earth Potential Equalizing > >Hi all, > >We are manufacturing heating equipm

Re: impact /probes

Try www.productsafet.com/ -Original Message- From: Dwight Hunnicutt To: EMC PSTC List-Post: emc-pstc@listserv.ieee.org Date: Tuesday, November 16, 1999 4:03 PM Subject: impact /probes > >Mech testers- > >Anyone know of sources for the UL1950 Impact Ball (500g, 50mm dia.)? >(I know of

Re: Is Your Head Clamp CE Marked?

OUCH!! -Original Message- From: Price, Ed To: 'aimee.l.da...@us.ul.com' Cc: EMC-PSTC (E-mail) List-Post: emc-pstc@listserv.ieee.org Date: Monday, November 15, 1999 7:10 PM Subject: RE: Is Your Head Clamp CE Marked? > >Some brains may be grandfathered, but there would still be

Re: Is Your Head Clamp CE Marked?

Grandfather Clause -Original Message- From: Grasso, Charles (Chaz) To: 'aimee.l.da...@us.ul.com' ; Scott Douglas Cc: EMC-PSTC (E-mail) List-Post: emc-pstc@listserv.ieee.org Date: Monday, November 15, 1999 3:55 PM Subject: RE: Is Your Head Clamp CE Marked? > >I hesitate to eve

WorldWide Electrical Guide for Industrial Environment

Does anyone know of a world-wide electrical guide for the industrial environment (i.e., 220V, 440V etc., 2 phase, three phase, etc.)? I have guides for consumer environment but I have not encountered similar guides for industrial environment. Thanks, Pryor McGinnis c...@prodigy.net

Re: shielded enclosure installataion

Check with Bob Yff at Panashield. panashi...@aol.com -Original Message- From: Dave Clark To: emc-p...@ieee.org List-Post: emc-pstc@listserv.ieee.org Date: Thursday, October 07, 1999 2:03 PM Subject: shielded enclosure installataion > >My company has a 12x12 sheilded enclosure that we

Re: IEC 60990 Vs IEC 60950

Nick, I tend to agree with you. The maintaining an up-to-date file of standards from the view point of a test house gets to be a nightmare. -Original Message- From: Nick Williams To: emc-p...@majordomo.ieee.org List-Post: emc-pstc@listserv.ieee.org Date: Tuesday, September 28, 1999 10

UL and CE Mark Acceptance

Hello All, What countries will accept UL Mark without additional testing or marking? Does anyone know of a list of countries other than the EU members that accept the CE Marking without additional testing or marking? Best Regards, Pryor McGinnis c...@prodigy.net - This message is

Re: help (plastics marking)

at called out in the UL report, all was well. This was not a big effort to implement as I remember. Best Regards Pryor -Original Message- From: Ehler, Kyle To: PRYOR MCGINNIS ; Price, Ed ; emc-p...@ieee.org List-Post: emc-pstc@listserv.ieee.org Date: Monday, September 20, 1999 10:27 A

Re: help

I have experienced good results by requesting the Part/Component molder to mold the plastic identification in the part/component. Pryor McGinnis c...@prodigy.net -Original Message- From: Price, Ed To: 'emc-p...@ieee.org' List-Post: emc-pstc@listserv.ieee.org Date: Friday, Se

Re: Status of IRAM ITE cerification?

Hello All, Below is a message I received from IRAM. TO: Mr. Pryor McGinnis Dear Sir: Yes, we have MOU with UL, CSA, ITS. The contact men are: - UL - Jaime Cadena - e-mail: cade...@ul.com - ITS - Paul Moliski - e-mail: pmoli...@itsqs.com - CSA - Gregoire Daniszewski - e-mail: danis

Re: Canadian language requirements

You might try the following websites. www.ic.gc.ca/ www.scc.ca/ Pryor McGinnis c...@prodigy.net -Original Message- From: Aschenberg, Mat To: Emc-Pstc (E-mail) List-Post: emc-pstc@listserv.ieee.org Date: Monday, August 23, 1999 4:02 PM Subject: Canadian language requirements

Re: EN50082-1:1997 & EN55024

You should always start at the lower ESD Level and step up to the higher levels. You cannot skip the lower levels as I have encountered products that pass the higher levels and fail at the lower levels. Pryor McGinnis c...@prodigy.net -Original Message- From: Jim Hulbert To: emc-p

Re: Survey Concerns

I think that goes for all. -Original Message- From: Michael Taylor To: 'J and P Global Acct' ; emc-p...@majordomo.ieee.org List-Post: emc-pstc@listserv.ieee.org Date: Wednesday, August 11, 1999 4:41 PM Subject: RE: Survey Concerns > >Nice try, I still won't give out information relat

Re: new legal issues

I agree that you can't trust everyone to have common sense; however, common sense should be used in drafting Prop 65s. -Original Message- From: Price, Ed To: EMC PSTC List-Post: emc-pstc@listserv.ieee.org Date: Thursday, August 05, 1999 11:42 PM Subject: RE: new legal issues > >Eric:

Re: Labelling - AC/DC Power adapter

Tested to UL requirements is insufficient. The product needs to be UL tested and UL listed. -Original Message- From: sb...@ctlsg.creaf.com To: EMC-PSTC (E-mail) List-Post: emc-pstc@listserv.ieee.org Date: Friday, August 06, 1999 5:06 AM Subject: Labelling - AC/DC Power adapter > > >

Re: IRAM Argentina

You can access the IRAM Web site through http://www.iram.com.ar. The web site lists phone, fax, and e-mail address. Best Regards, Pryor McGinnis c...@prodigy.net -Original Message- From: Barry Esmore To: EMC-PSTC Date: Tuesday, August 03, 1999 5:58 AM Subject: IRAM

Re: US position paper on Harmonics

The attached document should help. -Original Message- From: Chris Olliffe To: emc_p...@ieee.org ; t...@world.std.com List-Post: emc-pstc@listserv.ieee.org Date: Wednesday, July 07, 1999 10:54 AM Subject: US position paper on Harmonics > Recently I recall someone posting a link to a

Re: BCIQ

Compliance Test Laboratories is accreditated with BCIQ Taiwan. Telephone: (864) 843-1604 FAX: (864) 843-1812 E-mail: c...@prodigy.net Contact: Pryor McGinnis -Original Message- From: Gary McInturff To: 'emc-pstc list server' List-Post: emc-pstc@listserv.ieee.org Date: Frida

Re: Question on FCC Class B certifications.

I have tested two different PCs "assembled from FCC Class B compliant components" and both failed with very high amplitudes. -Original Message- From: Cortland Richmond <72146@compuserve.com> To: Kretsch, John ; ieee pstc list List-Post: emc-pstc@listserv.ieee.org Date: Wednesday, Nove

Re: Recommendations for PCs

It depends upon the cabinet construction. Cheap cabinets with soft or thin metal is a problem. -Original Message- From: Wayne Cooke To: emc-p...@ieee.org List-Post: emc-pstc@listserv.ieee.org Date: Thursday, September 03, 1998 9:09 PM Subject: RE: Recommendations for PCs >I find this a

Re: Recommendations for PCs

In our case, you could push down on the cabinet in the center of the top with your hand and change the emissions. Emissions would decrease with hand on top with no pressure. This was cabinet had no fingers or gaskets and the steel was thin compared to other cabinets. -Original Message- F

Re: Conducted Emission test on DC powered Equipment

You are correct; however, if there is a charger to keep the battery charged that plugs into the public utility, conducted emissions test is performed on the charger power cord. This assumes the product may be operated while the battery is being charged. This is my opinion on the subject. -Or

Re: Witness Testing

We do witness testing with UL for UL1950. We haven't gotten into other standards yet. The greatest advantage is the quicker approval. If you send your unit to UL, it sits in a "Q" until its turn. With witness testing, there is no "Q" and UL schedules the testing quickly. If you request an earl

Re: Energy Star (?)

Energy Star is an EPA program for energy saving products. It started out with computers and monitors that go to "sleep" after a period of non-use. Power use during the sleep mode is limited to 30 W for computers. Go to www.epa.gov/energystar.html to learn more about this program. -Original Me

Machinery Stop Modes

I have a client with the following question on stop modes for machinery. I have a VFD which has a RUN input which when closed is configured to command the VFD to follow the DAC speed reference. When open, the VFD is configured to ramp stop. I have this input tied to my overload circuit such t

UKAS/NAMAS

I have a client with electronic controlled flow meters who is in need of testing/certification by a UKAS/NAMAS Accredited laboratory. Because of the flow meter, I believe Weights & Measures plus EMC will be required. Does anyone know of an efficient path for this certification? P

Low Power Transmitter Requirements in Japan

requirements in Japan?  Does VCCI approve this type of device or is it under control of some other agency? Thank you for any assistance you can provide. Pryor McGinnis Compliance Test Laboratories Liberty, SC 29657 Phone:  864 843 1604 FAX:  864 843 1812 Email:  c...@prodigy.net RCIC - http

IFI Chamber Model CC 101

IFI Model CC 101 S/N 352 chamber available for purchase. Sold new in 1989. Measures 142" X 73" X 51", DC to 100 MHz. Contact Alvin McNaughton Phone: (803) 475-5600 or (803) 475-5800 RCIC - http://www.rcic.com Regulatory Compliance Information Center

Positive Guided Relays

His questions is "what are the chances of these EE Control relays being approved?" He does not want to present the circuit to an agency for evaluation without some assurance that these relays are acceptable. Pryor McGinnis Compliance Test Labs c...@prodigy.net RCIC - http://www.rcic.co