y part of this message
if you are not the intended recipient.
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Spencer, David H
Sent: Thursday, December 11, 2008 8:14 AM
To: emc-p...@ieee.org
Subject: RE: DIY Equipment and Calibration
Larry,
For EMC calibrations done in house
- phone
858-485-3788 - fax (unattended)
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Derek
Walton
Sent: Thursday, December 11, 2008 8:45 AM
To: Larry Stillings
Cc: emc-p...@ieee.org
Subject: Re: DIY Equipment and Calibration
HI Larry,
was this really required, in 17025
> Larry Stillings
>
> -Original Message-
> From: rehel...@mmm.com [mailto:rehel...@mmm.com]
> Sent: Thursday, December 11, 2008 10:45 AM
> To: emc-p...@ieee.org
> Subject: RE: DIY Equipment and Calibration
>
> I believe that you will also need your calibrating equipment traceable
December 11, 2008 10:50 AM
To: emc-p...@ieee.org
Subject: RE: DIY Equipment and Calibration
One other thing to add to this thread (as we just went through an audit)
is
you will need to write a test procedure for the calibration (preferably
with
pictures of the calibration setup).
Larry Stil
AM
To: emc-p...@ieee.org
Subject: RE: DIY Equipment and Calibration
I believe that you will also need your calibrating equipment traceable to a
National Standards group such as NIST in the US.
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651- 778-6336
Fax: 651-778-6252
in-house built test items, most any ISO17025
test lab which calibrates EMC or similar devices can perform the
calibration.
Regards
David Spencer
EMC Engineer
Xerox Corp.
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of
cmander...@micron.com
Sent: Wednesday,
Group,
When producing EC Declarations of Conformity, it is not usual to include a
statement of the 'built standard' of the equipment as type tested. Indeed this
does not appear to be a requirement listed by EN 17050, listing only the model
number as being required.
Obviously the 'built standar
__
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of
cmander...@micron.com
Sent: Wednesday, December 10, 2008 5:00 PM
To: emc-p...@ieee.org
Subject: DIY Equipment and Calibration
I'm aware of some pe
In message
<44724788633d3042a64174bea5c59f3004bc2...@ntxboimbx21.micron.com>, dated
Wed, 10 Dec 2008, cmander...@micron.com writes:
>1) Has anyone tried to build their own EM Injection clamp?
> If so, were you able to find a ferrite supplier that sold
>half-ring cores?
The prototype w
I'm aware of some people making their own CDN's and LISN's among other things
and I have few questions about that.
1) Has anyone tried to build their own EM Injection clamp?
If so, were you able to find a ferrite supplier that sold half-ring
cores?
2) Is it acceptable to calibrate your
10 matches
Mail list logo