I read in !emc-pstc that John Woodgate j...@jmwa.demon.co.uk wrote (in
o03flmaungp8e...@jmwa.demon.co.uk) about 'EN 61010-1 2001 and
IEC61010-3', on Fri, 29 Mar 2002:
OK, in UK you need to find a trade association or similar non-commercial
body such as a learned society to sponsor your membership
I read in !emc-pstc that Andrew Wood andrew.w...@landinst.com wrote
(in e49d8b319a2fd5119e2808002bc33c591c8...@landuk1.landinst.com) about
'EN 61010-1 2001 and IEC61010-3', on Fri, 29 Mar 2002:
Apologies. Although I used my address in the original posting, I omitted it
from my reply.
Hence you
-Original Message-
From: John Woodgate [SMTP:j...@jmwa.demon.co.uk]
Sent: 28 March 2002 16:41
To: emc-p...@majordomo.ieee.org
Subject: Re: EN 61010-1 2001 and IEC61010-3
In the USA, I suppose you have to find someone who is a member of the
USNC TAG for SC62A
I read in !emc-pstc that Andrew Wood andrew.w...@landinst.com wrote
(in e49d8b319a2fd5119e2808002bc33c591c8...@landuk1.landinst.com) about
'EN 61010-1 2001 and IEC61010-3', on Thu, 28 Mar 2002:
Thanks for the reply.
..The matter should be referred back to IEC SC62A so
Thanks for the reply.
..The matter should be referred back to IEC SC62A so that
the error can be
corrected..
How does a mere mortal go about such an excercise?
best regards
Andy.
This e-mail and its contents may be confidential,
|
+=+
-Original Message-
From: Andrew Wood [mailto:andrew.w...@landinst.com]
Sent: Thursday, March 28, 2002 2:20 AM
To: 'emc-pstc'
Subject: EN 61010-1 2001 and IEC61010-3
All
I have a question regarding interpretation of section 6.10.2 Fitting of
non-detachable MAINS supply cords
in EN 61010-1
I read in !emc-pstc that Andrew Wood andrew.w...@landinst.com wrote
(in e49d8b319a2fd5119e2808002bc33c591c8...@landuk1.landinst.com) about
'EN 61010-1 2001 and IEC61010-3', on Thu, 28 Mar 2002:
So bottom line is: is my understanding of the current requirements of
EN61010-1
6.10.2 correct?
I
All
I have a question regarding interpretation of section 6.10.2 Fitting of
non-detachable MAINS supply cords
in EN 61010-1:2001.
Cord anchorages shall meet the following requirements
a)...d)
e) A compression bushing shall not be used as a cord anchorage unless it has
provision for
8 matches
Mail list logo