On Wed, 2008-05-07 at 23:16 -0600, rtwas wrote:
> Hello,
>
>
> Jon Elson wrote:
>
> >
> > Remember that the tooling is a major expense on
> >these machines, a rack of NMTB 40 holders and collets is worth a
> >LOT more than most older machines.
> >
> >
> NTMB 40 for cnc? I thought these were
I've done that.
On Wed, 2008-05-07 at 21:53 -0400, John Kasunich wrote:
> John Kasunich wrote:
> > Ray Henry wrote:
> >> Sounds like you are saying you want me not to teach this class.
> >>
> >
> > (off list)
> > Hi Ray:
> >
>
> Damn.
-
Hi Ed
I've twisted Roland's arm just enough to get extra tables. I'm hoping
we'll have enough for all of the EMC crowd. Got any ideas about layout
in the space?
Rayh
On Tue, 2008-05-06 at 14:08 -0400, Ed wrote:
> Ray Henry wrote:
> > Hi Dale
> >
> > I'll be bringing a few computers that I wa
Hi all,
I get the following error when trying to manually do a loadrt of motmod:
Insmod: error inserting
/usr/realtime-2.6.24.16-rtai/modules/emc2/motmod.ko:-1 unknown symbol in
module.
This is the error when using ubuntu 8.04, but I get essentially the same
error under 6.06. It can be easily re
You can check dmesg for the symbol missing..
the source for motmod is in emc2/src/emc/motion/*.c|h
It gets built from a couple of files..
Anyways, if it works by running emc2 then the module is fine, and you're
missing something (dmesg will shed lights there)
Regards,
Alex
- Original Messag
Eric H. Johnson wrote:
> Hi all,
>
> I get the following error when trying to manually do a loadrt of motmod:
>
> Insmod: error inserting
> /usr/realtime-2.6.24.16-rtai/modules/emc2/motmod.ko:-1 unknown symbol in
> module.
>
> This is the error when using ubuntu 8.04, but I get essentially the s
Dave,
I live in Lenexa Kansas a suburb of Kansas City. I hopped to go to the EMC
CNC workshop in IL however around that time I have a prior engagement with
my wife. If I would go she would kill me and the machining hobby would be
out the window. I might go next year. Is there anyone else in KC
Alex, John,
Ok, it is obvious now. The missing symbols were kinematicsType,
kinematicsInverse, and kinematicsForward, which all are defined on the
subsequent line when exported with halcmd save. Specifically:
loadrt trivkins
Thus one can't do a halcmd save and then load the saved text with halcmd
Eric H. Johnson wrote:
> Alex, John,
>
> Ok, it is obvious now. The missing symbols were kinematicsType,
> kinematicsInverse, and kinematicsForward, which all are defined on the
> subsequent line when exported with halcmd save. Specifically:
> loadrt trivkins
>
> Thus one can't do a halcmd save a
Hi all,
I'm using an m5i20 card with the hostmot5_4eh.bit configuration that
allows PWM at 50 kHz.
I have to reload the fpga configuration after each bootup of the machine
with 'sudo m5i20cfg hostmot5_4eh.bit 0'
In my HAL files I use the m5i20 driver without loading the default
(wrong, in my
Dave Engvall wrote:
> I didn't (don't) know any better so I consider the Mazak ATC as
> pretty standard in complexity.
> Some of those on the horizontals must be simpler since they change
> tools in 2 sec or so.
>
The Mazak Micro 5 has a part that swings the holder 90 degrees
from the plane
Witek GB wrote:
> Dave,
>
> I live in Lenexa Kansas a suburb of Kansas City. I hopped to go to the
> EMC CNC workshop in IL however around that time I have a prior
> engagement with my wife. If I would go she would kill me and the
> machining hobby would be out the window. I might go next ye
On Thu, 8 May 2008, Anders Wallin wrote:
> Date: Thu, 08 May 2008 15:57:49 +0300
> From: Anders Wallin <[EMAIL PROTECTED]>
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] having to reload fpga config on m5i20 on every bootup?
Hi All,
I was getting concerned about hotel reservations for the fest,
so I started checking. The economy does not seem to have
depressed the rates.
Having at the Econo Inn and the Americas Best in past years,
I decided to go slightly upscale. These two do offer the best
rates and while they are
Peter C. Wallace wrote:
> On Thu, 8 May 2008, Anders Wallin wrote:
>
>> Date: Thu, 08 May 2008 15:57:49 +0300
>> From: Anders Wallin <[EMAIL PROTECTED]>
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
>> To: "Enhanced Machine Controller (EMC)"
>> Subject: [Emc-users] having to reload fpg
Steve,
I plan on spending a week at the fest. My first year.
Which weekend is better to be at the fest? Or what days are best to be at the
fest?
Thank you
Dale
Steve Stallings <[EMAIL PROTECTED]> wrote:
Hi All,
I was getting concerned about hotel reservations for the fest,
so
I guess that answers that question. :)
Very kewl stuff btw.
Robert W.
Kirk Wallace wrote:
>On Wed, 2008-05-07 at 23:16 -0600, rtwas wrote:
>
>
>>Hello,
>>
>>
>>Jon Elson wrote:
>>
>>
>>
>>> Remember that the tooling is a major expense on
>>>these machines, a rack of NMTB 40 holders and
I'm not in Kansas but I'm in south east Missouri, Poplar Bluff to be exact.
John
On 8 May 2008 at 8:29, Witek GB wrote:
>
> Dave,
>
> I live in Lenexa Kansas a suburb of Kansas City. I hopped to go to the
> EMC CNC workshop in IL however around that time I have a prior
> engagement with my wif
Dale Ertley wrote:
> Steve,
> I plan on spending a week at the fest. My first year.
>
> Which weekend is better to be at the fest? Or what days are best to be at
> the fest?
>
> Thank you
> Dale
>
The second weekend.
The workshop officially runs from Monday to Sunday. Some of u
John Kasunich wrote:
>Peter:
>
>Does a warm boot reset the FPGA and/or the bridge chip?
>
>
It appears to, at least on the 5i22.
- Steve
-
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this
>>
>
> Peter:
>
> Does a warm boot reset the FPGA and/or the bridge chip?
Usually the BIOS generates a PCI reset at warm start,
this will reset the FPGA...
>
> Regards,
>
> John Kasunich
>
> -
> This SF.net email is sponsore
>
> Message: 7
> Date: Thu, 08 May 2008 17:26:40 -0600
> From: "John Thornton" <[EMAIL PROTECTED]>
> Subject: Re: [Emc-users] Buying used CNC machine - what to look for??
> To: "Enhanced Machine Controller (EMC)"
>
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain; charset=US-ASC
Can comedi drivers be used for EMC? If not, would it be hard to convert one to
a HAL driver?
Dave
-
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's sti
Hello!
What did I said bad or what recommend bad/stupid ideas?
If one got happy when I burned down my encoder with 24 V, thank you to
saying that.
It really looks educational and helpful.
What did I said or proposed was wrong???
Sorry if I cause trouble.
Aram
> Ray Henry wrote:
>> Sounds li
Hi all,
Just wanted to express my thanks to all the developers and others
that have helped with the latest release
of emc.
I started at about 11:00 am this morning to update my 2.0.0 to the
latest release.
Installed Live off the CD then did the updates (which took about 1.5
hours). I swear e
Hi Aram,
RS-274NGC as far as I can tell just doesn't provide for special
functions. It does provide G01, G02, G03. Anything else is programmed
by using that facility and programming externally. A few
manufacturers have provided splines specially coded within their
version of the interprete
26 matches
Mail list logo
