So back for a bit, and have decided to get the D525MW w/1GB of RAM.
Placing order in the morning. I completely forgot about this
CF-to-IDE option, and will prob look into it later, but for now I'm
anxious to get something up and running. Incremental dev ;)
FWIW, I have 16 2.5 drives
2011/7/4 Peter C. Wallace p...@mesanet.com:
In HostMot2, outputs are inverted by
setting the invert_output attribute of the proper GPIO bit.
Got stuck with this - how do I specify that I want to invert direction
bit of a particular stepgen? That is not a GPIO bit and I do not see
any related
Hello, gentlemen!
I am trying to add pyvcp button that would move the machine to
particular position;
For that I have:
1) in INI file I wrote:
[HALUI]
MDI_COMMAND = G0 G53 X100 Y100
2) xml file, where I specified the text and name of halpin
3) postgui HAL file that links pyvcp pin to
On 5 July 2011 15:17, Viesturs Lācis viesturs.la...@gmail.com wrote:
What am I missing here?
Possibly [HAL] HALUI = halui
--
atp
Torque wrenches are for the obedience of fools and the guidance of wise men
--
All of
On Tue, 5 Jul 2011, Viesturs L?cis wrote:
Date: Tue, 5 Jul 2011 17:11:34 +0300
From: [UTF-8] Viesturs L?cis viesturs.la...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject:
On 5 July 2011 15:11, Viesturs Lācis viesturs.la...@gmail.com wrote:
Got stuck with this - how do I specify that I want to invert direction
bit of a particular stepgen? That is not a GPIO bit and I do not see
any related pin anywhere in HAL
Look in the dmesg output from when the hm2 driver
Ok, thanks!
Unfortunately I was on a very short time, so I left it with minus
sign before scale parameter in INI file. It seems that it works that
way too.
Viesturs
2011/7/5 andy pugh bodge...@gmail.com:
On 5 July 2011 15:11, Viesturs Lācis viesturs.la...@gmail.com wrote:
Got stuck with this
Hello, folks!
I got the BIOS version that is on the D525 board.
I also ran a short latency test.
Few days ago I was asked if I could add that to wiki page. I would
gladly do that, but...
Which page should I post it in?
This one?
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Latency-Test
I tried
2011/7/5 Viesturs Lācis viesturs.la...@gmail.com:
I got the BIOS version that is on the D525 board.
I also ran a short latency test.
By the way, which latency do you have?
My D525MW shows up to 18000 with 2 glxgears running for several hours.
Even base period 35000 results in realtime delay
I have to admit that I was able to run latency test for a short time interval.
Max jitter was 7300 ns.
Nevertheless I am running it with a 0,75 ms servo period, which gives
update interval of 1,33 kHz and I have never had any messages about
realtime delays.
The machine has 7i43 board, which runs
On 5 July 2011 20:56, Andrew parallel.kinemat...@gmail.com wrote:
My D525MW shows up to 18000 with 2 glxgears running for several hours.
Even base period 35000 results in realtime delay message (with 3000 ns
driver timings). I'm very disappointed.
Do you have isolcpus set? That might help. My
Oh yes, I have isolcpus=1!
No special hyperthreading disabling though.
Viesturs
2011/7/6 andy pugh bodge...@gmail.com:
On 5 July 2011 20:56, Andrew parallel.kinemat...@gmail.com wrote:
My D525MW shows up to 18000 with 2 glxgears running for several hours.
Even base period 35000 results in
2011/7/6 andy pugh bodge...@gmail.com:
On 5 July 2011 20:56, Andrew parallel.kinemat...@gmail.com wrote:
My D525MW shows up to 18000 with 2 glxgears running for several hours.
Even base period 35000 results in realtime delay message (with 3000 ns
driver timings). I'm very disappointed.
Do
Could you guys please explain isolcpus and hyperthreading? Are these in
the BIOS? What should these be set at for a D510MO?
Much thanks!
Jim
-Original Message-
From: Andrew [mailto:parallel.kinemat...@gmail.com]
Sent: Tuesday, July 05, 2011 4:26 PM
To: Enhanced Machine Controller (EMC)
2011/7/6 James Louis james.lo...@gastechnology.org:
Could you guys please explain isolcpus and hyperthreading? Are these in
the BIOS? What should these be set at for a D510MO?
Much thanks!
Jim
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TroubleShooting#The_isolcpus_Boot_parameter
Thanks for the explanation. I have two D510MO (Sherline stepper lathe and PPMC
servo mill) and I will change them both.
Cheers,
Jim
-Original Message-
From: Andrew [mailto:parallel.kinemat...@gmail.com]
Sent: Tuesday, July 05, 2011 4:54 PM
To: Enhanced Machine Controller (EMC)
Subject:
On 7/5/2011 5:26 PM, Andrew wrote:
2011/7/6 andy pughbodge...@gmail.com:
On 5 July 2011 20:56, Andrewparallel.kinemat...@gmail.com wrote:
My D525MW shows up to 18000 with 2 glxgears running for several hours.
Even base period 35000 results in realtime delay message (with 3000 ns
2011/7/6 Dave e...@dc9.tzo.com:
On 7/5/2011 5:26 PM, Andrew wrote:
2011/7/6 andy pughbodge...@gmail.com:
On 5 July 2011 20:56, Andrewparallel.kinemat...@gmail.com wrote:
My D525MW shows up to 18000 with 2 glxgears running for several hours.
Even base period 35000 results in realtime delay
18 matches
Mail list logo
