FWIW, I am using a small USB board from a guy named Leo Bodnar to read
analog inputs like setpoint potentiometers, it's not used in the servo loop.
These boards seems aimed at gaming and flight simulators but work with
hal_input.
-Original Message-
From: Dave [mailto:e...@dc9.tzo.com]
On ven, 2012-01-13 at 11:15 -0700, s...@highlab.com wrote:
Oh! Try git checkout filename.
Did this way (thanks for suggestion).
I have the same problem, indentation is wrong.
If you open that you can see that in the new part of file, indentation
is correct, but is not in the most of the file.
On sab, 2012-01-14 at 13:51 +0100, Spiderdab wrote:
On ven, 2012-01-13 at 11:15 -0700, s...@highlab.com wrote:
Oh! Try git checkout filename.
Did this way (thanks for suggestion).
I have the same problem, indentation is wrong.
If you open that you can see that in the new part of file,
I am attempting to install emc 2.4.6 on an HP Pavilion t3000 AMD PC.
I have an existing older version, running on an older PC (it wasn't up
to the upgrade).
So, using the old hal ini files, I constructed the new version, adding
loadrt probe_parport to the hal file.
But, I get no output from the
On Saturday, January 14, 2012 10:57:32 AM Bob von Knobloch did opine:
I am attempting to install emc 2.4.6 on an HP Pavilion t3000 AMD PC.
I have an existing older version, running on an older PC (it wasn't up
to the upgrade).
So, using the old hal ini files, I constructed the new version,
On Saturday, January 14, 2012 11:25:33 AM Bob von Knobloch did opine:
On 14/01/12 16:59, gene heskett wrote:
Yes, remove and blacklist the 'lp' driver, it has seized the port and
doesn't share its toys at all well.
Cheers, Gene
OK Gene, but that is what I have already tried (removing
On 14/01/12 17:40, gene heskett wrote:
Well, I see that lp is loaded again here, and it seems to be working. I
don't recall rebooting it since last running emc.
From an lsmod output:
ppdev 5259 0
parport_pc 25637 1
lp 7028 0
parport
Have you updated the install to the latest version of emc2? (just update from
the update manager) I know there was some issues that where fixed in the
printer port detection between the livecd version and current...
sam
On Sat, 14 Jan 2012 18:03:08 +0100
Bob von Knobloch b...@vknobloch.de
On 14/01/12 18:10, sa...@empirescreen.com wrote:
Have you updated the install to the latest version of emc2? (just update
from the update manager) I know there was some issues that where fixed in
the printer port detection between the livecd version and current...
sam
Hmmm, the package
On 1/14/2012 10:32 AM, Bob von Knobloch wrote:
I am attempting to install emc 2.4.6 on an HP Pavilion t3000 AMD PC.
I have an existing older version, running on an older PC (it wasn't up
to the upgrade).
So, using the old hal ini files, I constructed the new version, adding
loadrt
On 14/01/12 18:57, Kent A. Reed wrote:
Bob:
Maybe I'm misreading this but you seem to be saying that the parallel
port works fine with EMC2 (ptest.hal ptest.xml work fine).
If that is so, then the problem lies in your (new) configuration. You
can nail this diagnosis by loading Halscope
On Saturday, January 14, 2012 02:59:38 PM Bob von Knobloch did opine:
On 14/01/12 17:40, gene heskett wrote:
Well, I see that lp is loaded again here, and it seems to be working.
I don't recall rebooting it since last running emc.
From an lsmod output:
ppdev 5259 0
Hi all;
I just spent 2 hours ogling strace output while trying to get this
visolate.jar to do something even if it was to tell me to go away.
What I was doing was looking at the strace output for the first instance of
each library etc that it wanted to open, did a mkdir -p to that location,
13 matches
Mail list logo