I have started to play around with EDM. The intention is to make an
EDM "grinder" to profile tool steel and possibly carbide cutting tools
using CNC-turned profiles.
At the moment I am using a cobbled-together XY table with a couple of
STMBL drives.
One of the STMBL analogue inputs is used to meas
Andy,
I have been experimenting with EDM long time ago, say 25 years. I used a
simple RC-circuit together with a "soft" transformer (ca.1.5 mm air gap)
in order to forgive for the shorts and save fuses. All was mounted on my
drill press. I gave up when I realized that without a controlled
tran
On Sunday 31 January 2021 08:28:13 andy pugh wrote:
> I have started to play around with EDM. The intention is to make an
> EDM "grinder" to profile tool steel and possibly carbide cutting tools
> using CNC-turned profiles.
>
> At the moment I am using a cobbled-together XY table with a couple of
On 01/31/2021 07:28 AM, andy pugh wrote:
I have started to play around with EDM. The intention is to make an
EDM "grinder" to profile tool steel and possibly carbide cutting tools
using CNC-turned profiles.
I think that it shows promise, but only partly works.
I am using a 50R resistor and a
On 01/31/2021 07:28 AM, andy pugh wrote:
I have started to play around with EDM. The intention is to make an
EDM "grinder" to profile tool steel and possibly carbide cutting tools
using CNC-turned profiles.
A fancy commercial (and patented) EDM system was described
by a tech who worked on them
On Sun, 31 Jan 2021 at 16:06, Jon Elson wrote:
> I made a simple EDM for tap burning type jobs a long time
> ago. It used something like 36 V DC, 30 Ohm resistor and a
> selection of oil-paper capacitors of 1, 2, 4 and 6 uF or
> so.
A common thread here seems to be that my 1000uF electrolytic i
There might be some gems in this video? I have an interest (presently on hold)
to make a wire edm so have been collecting information etc.
https://www.youtube.com/watch?v=9IWWa0xCd04&t=9s
There is also a Polish forum where someone describes their power supply as well
as details on how they use
Another source of information about pulse generator design:
https://langfordw.pages.cba.mit.edu/desktopWEDM/electronics/
https://www.cnc.info.pl/drazenie-metoda-domowa-moje-proby-t11692-20.html
(Google translate helps here:-))
Again, my focus is on wire EDM but there must be similarities
Ger
Andy,
Check out this page:
http://mikesworkshop.weebly.com/a-spark-erosion-apparatus.html
Also Model Engineer's workshop had a 4 part series on building one. I'll go
through my archives and see if I can find them. I'm pretty sure I had all 4.
An online search doesn't pinpoint which issues.
J
HI Andy,
There's also this.
https://www.cnczone.com/forums/general-edm-discussion/
Many links are broken though. And the Yahoo group on EDM is gone and it
doesn't look like it was migrated to groups.io.
John Dammeyer
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
>
Issue 168, Oct 2010 is the first installment
Gerrit
-Original Message-
From: John Dammeyer [mailto:jo...@autoartisans.com]
Sent: January 31, 2021 1:31 PM
To: 'Enhanced Machine Controller (EMC)'
Subject: Re: [Emc-users] EDM from scratch
Andy,
Check out this page:
http://mikesworkshop.we
Rats. I'm missing #169 for some reason.
The series I was thinking about was in issues #57..#60 and with addendums in
#64 and #68. The #68 issue discussed dielectrics safe for the home workshop
and the liquid mentioned may still be available in the UK.
John Dammeyer
> -Original Message
Issues 1 - 163 might be available on some of the darker areas of the
internet if you can't find them legally. A quick check at the Jolly Roger
one lists them.
Dave
On Sun, Jan 31, 2021 at 2:36 PM John Dammeyer
wrote:
> Rats. I'm missing #169 for some reason.
>
> The series I was thinking abou
Problem solved.
-Original Message-
From: John Dammeyer
Sent: January 31, 2021 2:35 PM
To: 'Enhanced Machine Controller (EMC)'
Subject: Re: [Emc-users] EDM from scratch
Rats. I'm missing #169 for some reason.
The series I was thinking about was in issues #57..#60 and with addendums
Ok. I found the config/python script I was working on... Late 2014..
Boy. I will put them up somewhere tonight..
On Thu, Jan 28, 2021, 9:36 PM Gene Heskett wrote:
> On Thursday 28 January 2021 21:12:31 Bari wrote:
>
> > On 1/28/21 4:55 PM, Gene Heskett wrote:
> > > That's not the video I saw,
15 matches
Mail list logo