eable solution at a low cost. We could replace this motor
yearly for a long time, for the cost of the other solution.
Thanks again - Andy Evans (Oregon, USA)
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/lis
ir cooling, and they seem to add size. We can do liquid and use filtered coolant. Also, the duty cycle is rather low, currently about 40 seconds every 15 minutes. Thank you!
//
Andy//
--
Andy Evans
Evans Precision Tooling Incorporated
541.990.2122
__
not to purchase the $12K solution.
Thank you!
Andy Evans
Evans Precision Tooling Incorporated
541.990.2122
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
https://portland.craigslist.org/grg/tls/d/huge-shoda-cnc-router-funac/6310723057.html
--
Andy Evans
Evans Precision Tooling Incorporated
541.990.2122
--
Check out the vibrant tech community on one of the world's
getting it done sooner. I'll also consider the idea of bringing in
sales/consultation, as it could be considerably less time, trouble and
cost compared to hard-knocking it. Thanks again!
Andy Evans
Evans Precision Tooli
ise and lower arm to load/unload part fixture nest
Rotate the arm to index part
Still probably need grip/release
Hmm. More to chew on! Much appreciated!
Andy Evans
Evans Precision Tooling Incorporated
--
Check out the vibr
002" or so accuracy. The fixture will do some
self-aligning of the part as it is clamped. Does anyone have any
recommendations and sources for a suitable robot?
Thanks again!
Andy
------
Andy Evans
Evans Precision Tooli
cons
of having a second instance of L-CNC running the robot, and how to have
one controller or the other slave?
Can anyone point to examples of these or possibly other ideas?
Thanks!
Andy Evans
Evans Precision Tooling Incorporated
Oregon USA
check out www.kudupoint.com
Andy Evans
Evans Precision Tooling Incorporated
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.lin
Gene, have you ever looked into
http://www.harveytool.com/
My go-to for those types of cutters. Also, have you considered
contouring your outside radius with a ball cutter and small stepovers?
Andy Evans
Evans Precision Tooling Incorporated
On 10/18/2015 1:06 AM, emc-users-requ
ou have any ideas to fire up my enthusiasm, or any interest
in acquiring the machine? I live in Oregon. The unit is on a pallet
and weighs around 2000 lb. I move things like this by renting a
drop-bed trailer and rolling it on and off with a pallet jack.
--
Andy Evans
Evans Precision
11 matches
Mail list logo