I would think most industrial vfd's would work in conjunction with a mesa
card that has +- 10V.
On Tue, Jul 10, 2012 at 2:01 PM, wrote:
> hi
> is there proven spindle drive for fanuc spindle motor?
> machine is working good but in case of problem i think it will be
> better replace whole old fan
.
The most common problem are the capacities on the power stage board. It's
actually an easy fix if your handy with a soldering gun.
Just assuming you have a machine with a broken VFD.
Gabe
On Jul 11, 2012 6:42 AM, "andy pugh" wrote:
> On 11 July 2012 12:22, Gabriel Willen
Hey Viesturs,
I have successfully done this twice, its fairly simple. I would be more
than happy to help you through it. Including a homing process. I would
suggest only using glade for the User Interface, not to handle any time
based commands. Found this out very quickly. Its really easy to
Hey everyone, its been a while since i have been on the IRC or checked my
email for that matter. I was wondering if anyone will be attending IMTS in
two weeks?
Gabe
--
Live Security Virtual Conference
Exclusive live event
There are a few 150v volt drives out there or drives that run on 110v.
Leadshine, motionking, are two I come up with off the top of my head. I
would be leery though for those I have seen, seem to be drives with switch
mode power supply built in and are rather bulky. Make sure that the output
vol
Looks good, but for that price might as well buy a 7i39 and go with servos.
On Aug 29, 2012 4:47 PM, "andy pugh" wrote:
> On 29 August 2012 18:55, jeremy youngs wrote:
> > Probably meant for elson or wallace but here it is anybody know where
> > to source reasnobly priced drives that will go to
I thought you all would get a kick out of this, but i designed my sprinkler
system controller using Gladevcp & a few custom hal components. I doubt
this was in mind when EMC2 was being made but i figured hey what the heck.
I have 9 zones. I bought 9 <
http://www.vegetronix.com/Products/Soil-Mois
Gabe
On Sun, Sep 2, 2012 at 7:59 AM, Gene Heskett wrote:
> On Sunday 02 September 2012 08:47:42 Mark Wendt did opine:
>
> > On Sat, Sep 1, 2012 at 8:44 PM, Gabriel Willen
> wrote:
> > > I thought you all would get a kick out of this, but i designed my
> >
Well I made pretty good progress on this program this weekend. Essentially
its one of many parts i'm making to make LinuxCNC setup a more user
friendly experience. The Mach3 user's won't have anything to say about
setup when im finished. I plan to build a LinuxCNC Main gui with seperate
applica
start something new.
Gabe
On Tue, Sep 4, 2012 at 8:23 AM, andy pugh wrote:
> On 4 September 2012 14:51, Gabriel Willen wrote:
> >
> > <
> >
> https://plus.google.com/photos/108420335892310746315/albums/5784211124086428513
> >>
>
> This seems ambitious, bu
hat's a whole seperate topic.
Gabe
On Tue, Sep 4, 2012 at 12:44 PM, andy pugh wrote:
> On 4 September 2012 16:24, Gabriel Willen wrote:
> > As long as it challenges me then i will stick with it
>
> Well, this is a challenge.
> How are you interrogating the components
Well i ruined it,
I looked it up immediately and read the wiki and it spoiled the ending...
there was no warning. Guess i won't be buing it. By the way haven't seen
you on the IRC you still out of the country?
Gabe
On Sat, Sep 8, 2012 at 4:22 AM, andy pugh wrote:
> Rather off-topic, but I th
So i did some remastering to the live cd of linuxcnc 2.5, also made a lite
version using Xfce4, this version has only the bare minimum to run LCNC..
I added the Linuxcnc tux logo to the installer, I also modified the
plymouth splash to use the Tux LinuxCNC logo on boot. For a live .iso
only, i di
ash cards instead without difficulty.
>
> I think I would have a hard time finding CF cards smaller than 4 gigs now.
>
> I was at Walmart recently and they were clearancing Sony 4 gig USB stick
> drives for $2.00 each!
> BTW, the Sony stick drives I got for $2 are really fast!
>
&
Welcome,
you will find plenty of support from this group!
Gabe
On Oct 16, 2012 7:26 AM, "John Thornton" wrote:
> Mark,
>
> Welcome to the fun.
>
> Also check out the resources in the forum and the wiki site.
>
> John
>
> On 10/16/2012 6:57 AM, Mark Brown wrote:
> > Hello everyone,
> >
> > I jus
I have successfully used Dmm tech servos with linuxcnc, but it was with the
older drive before the dyn3, I can vouch for the motor's though, they are
very well built, quite and durable. I actually spoke with the lead engineer
at IMTS this year. I made it a point to go there. Don't be fooled by th
Should be relatively easy using pycairo for the graphics. You can use gtk
drawing area and Cairo.create to make the widget.
On Dec 23, 2012 7:21 PM, "Gene Heskett" wrote:
> Greetings;
>
> Never having played with very much xml, I am wondering how it might be
> possible to make a round tachometer
Merry Christmas everyone hope everyone is healthy, and has a wonderful new
year
Gabe
On Dec 25, 2012 8:17 AM, "Gene Heskett" wrote:
> On Tuesday 25 December 2012 09:11:56 Jim Wilkin did opine:
>
> > Merry Christmas and a Happy New Year
> > from Canada.
> > James wilkin
>
> Either my memory
I decided to write a rt component that queues Linux signal SIGRTMIN on pin
state changes. I finished it up last night and have been running it
through some test today and it seems to be working incredibly well. The
advantage of this is to remove the polling overhead on the python gui. Now
the gu
I was wondering if i could lock linux cnc. I want to prevent the operator
from being able to minimize or accidently close emc2.
Thanks in advanced
Gabe
--
Better than sec? Nothing is better than sec when it comes to
monit
Thank you! I love the support that surrounds LinuxCnc.
Gabe W
--
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
Sorry for any misspelled words, I'm writing this from my phone with limited
time.
I understand just about everything when it comes to 3 phase motors with the
exception of one thing. Voltage, I can't figure out why servo motors run
on such high voltages. I have searched and searched for an explen
I understand the formula for power, and i realize its all that matters.
Watts are watts no matter what the volts or amps are. I also know that a
bldc motor and asynchronous motor are very similar. That's why I'm curious
how the cogging In a bldc motor don't affect it being a servo. If I could
bu
Finally some educated answers, this mailing list is really coming through!
I have a 660W 48v 15A Bldc motor, using this drive
http://www.sei-automation.com/products/Brushless/BLDC-5015A.html laying
around. I started thinking about trying to set it up as a servo, see how
it would do, Get a 1000cpr
http://www.wemotec.net/products/controller-modules/WT-SC25-Servocontroller.html
does
anyone know anything about this?
Thanks
Gabe
--
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell Yo
What do you guys think about using one of these to drive a BLDC or AC Servo
motor? http://www.fairchildsemi.com/products/discrete/spm/index.html...
seems like they have a good selection.
Gabe
--
Better than sec? Nothing is
I don't know if I'm miss understanding the bldc Hal component. I have a 3
phase half bridge driver ic that uses cmos, or ttl as inputs. So I
configured bldc with q for encoder, h for halls, and B for 6 bit inverting,
and 6 for output signal. Is it supposed to generated sinus pwm signals on
the o
Excellent that is what I figured.
Thanks
Gabe
On Apr 26, 2012 8:02 AM, "Viesturs Lācis" wrote:
> 2012/4/26 Gabriel Willen :
> >
> > Is it supposed to generated sinus pwm signals on
> > the outputs or is this a middle man for another price of hardware that
> &g
12 8:35 AM, "andy pugh" wrote:
> On 26 April 2012 13:01, Gabriel Willen wrote:
>
> > Is it supposed to generated sinus pwm signals on
> > the outputs or is this a middle man for another price of hardware that
> > would generate the pwm.
>
> No, bldc doesn
!!WARNING RAMBLING BELLOW!!
I know you haven't heard much from me, but I have been using linuxcnc for
two years now, both industrial and hobby use. I have been taking for
granted those who have made and still make this a great free resource with
excellent support.
So this is my formal thank
Andy,
Yes i have seen that video, i actually commented on it asking for the
sketch. I haven't heard from him though so i assume he either doesn't want
to share it or hasn't checked the comments yet.
Gabe
On Thu, Apr 26, 2012 at 10:48 AM, andy pugh wrote:
> On 26 April 2
ndy,
> >
> > Yes i have seen that video, i actually commented on it asking for the
> > sketch. I haven't heard from him though so i assume he either doesn't
> want
> > to share it or hasn't checked the comments yet.
> >
> > Gabe
> >
I used a small stepper motor hooked to an arduino for a jog wheel. Being
that steppers are 200 teeth it makes it easy to feel each rotation to the
next tooth. I can dig up the program if your interesred.
Gabe
On Jun 15, 2013 5:50 PM, "andy pugh" wrote:
> On 15 June 2013 19:47, Charles Steinkueh
33 matches
Mail list logo