On 2016-11-02 19:49, Peter C. Wallace wrote:
> No, normally the as delivered 7I90HDs are EPP/EPP, but they can be
> propgrammed
> with any firmware on request
Yes, Ok!
> Note: I have not tried the RS-422 programming for a while, I will test when I
> get a chance
OK, thanks!
Matsche
--
"In
On Wed, 2 Nov 2016, W. Martinjak wrote:
> Date: Wed, 2 Nov 2016 18:23:54 +0100
> From: W. Martinjak
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] 7i90HD programming
>
> On 2016-11-02 17:
On 2016-11-02 17:59, Peter C. Wallace wrote:
> and RS-422
> require special hardware)
Hooking into this point.
Do you have a good instruction for flashing with rs422?
Is rs422 working at delivery state of the 7i90?
Thanks
Matsche
--
"In der Wissenschaft siegt nie eine neue Theorie,
nur ihre
On Wed, 2 Nov 2016, Chris Albertson wrote:
> Date: Wed, 2 Nov 2016 09:12:46 -0700
> From: Chris Albertson
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] 7i90HD programming
>
ation files via the EPP interface."
- Original Message -
From: "Chris Albertson"
To: "Enhanced Machine Controller (EMC)"
Sent: Wednesday, November 2, 2016 12:12:46 PM
Subject: Re: [Emc-users] 7i90HD programming
OK so some new computers have obsolete ports that are
On 11/02/2016 09:12 AM, Chris Albertson wrote:
> OK so some new computers have obsolete ports that are not supported by the
> software that comes with them.
PCIe parallel port cards are commonly available and inexpensive.
Contrary to the PCI cards, it seems the NetMOS based cards are the ones
th
On 11/02/2016 11:12 AM, Chris Albertson wrote:
> So there is no why out of needed an old printer port interface? That
> means finding an old PC. It there no why to flash the card using (say)
> JTAG? The printer port is long obsolete.
>
>
No, you can get PCI and PCIe parallel port cards at j
achine Controller (EMC)"
> Sent: Tuesday, November 1, 2016 9:01:40 PM
> Subject: Re: [Emc-users] 7i90HD programming
>
> On Tue, Nov 1, 2016 at 4:36 AM, W. Martinjak wrote:
>
> > As I have written:
> >
> >The bit files are in:
> >
> >
esday, November 1, 2016 9:01:40 PM
Subject: Re: [Emc-users] 7i90HD programming
On Tue, Nov 1, 2016 at 4:36 AM, W. Martinjak wrote:
> As I have written:
>
>The bit files are in:
>
> 7i90/configs/hostmot2/
>
> You need one of the 7i90_spi*.bit files.
> The
On Tue, Nov 1, 2016 at 4:36 AM, W. Martinjak wrote:
> As I have written:
>
>The bit files are in:
>
> 7i90/configs/hostmot2/
>
> You need one of the 7i90_spi*.bit files.
> Then you have to flash the card on your printer port with
>
I've been following this because I think I
On Tuesday 01 November 2016 10:38:04 Gene Heskett wrote:
> On Tuesday 01 November 2016 07:36:35 W. Martinjak wrote:
> > As I have written:
> >
> >The bit files are in:
> >
> > 7i90/configs/hostmot2/
> >
> > You need one of the 7i90_spi*.bit files.
>
> And from the descriptions it
On Tuesday 01 November 2016 07:36:35 W. Martinjak wrote:
> As I have written:
>
>The bit files are in:
>
> 7i90/configs/hostmot2/
>
> You need one of the 7i90_spi*.bit files.
And from the descriptions it looks like any of them will do as I can
restrict the loadrt line to what I w
On Tuesday 01 November 2016 05:34:34 andy pugh wrote:
> On 1 November 2016 at 03:18, Gene Heskett wrote:
> > Surveying my system, thinking I can probably program this 7i90HD
> > right on this machine from its unused parport,
>
> You almost certainly want to use Mesaflash.
Which brings up a quest
As I have written:
The bit files are in:
7i90/configs/hostmot2/
You need one of the 7i90_spi*.bit files.
Then you have to flash the card on your printer port with
sudo ./mesaflash --verbose --epp --device 7i90 \
--addr 0xd010 --addr_hi 0xd000 \
--write configs/ho
On 1 November 2016 at 03:18, Gene Heskett wrote:
> Surveying my system, thinking I can probably program this 7i90HD right on
> this machine from its unused parport,
You almost certainly want to use Mesaflash.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for th
Greetings everybody;
Surveying my system, thinking I can probably program this 7i90HD right on
this machine from its unused parport, I go traipsing into:
/lib/modules/3.16.0-0.bpo.4-amd64/kernel/drivers/spi, and find I have a
choice of 3:
spi-bitbang.ko spi-butterfly.ko spi-lm70llp.ko
Now, s
16 matches
Mail list logo
