On Thu, Jul 26, 2012 at 12:39 PM, Jon Elson wrote:
> Whenever somebody has an "Axis no longer runs on my system" problem,
> that is the
> first thing that comes to mind, either video card or the drivers for it.
Although I should have realized the problem was video related because
Tkemc ran, I knew
Dave Keeton wrote:
> Jon,
>Thanks for looking into this but I have it working now. By the
> way, The Axiom card is a Digital I/O card supported by HAL. I was kind
> of surprised that everyone assumed that it was a video card.
Whenever somebody has an "Axis no longer runs on my system" probl
On Sat, 2012-07-21 at 18:22 -0500, Jon Elson wrote:
> Kent A. Reed wrote:
> > Rather, I'd have to ask what else was changed when the Axiom card was
> > installed? Call me an ornery cuss, but I suspect changes were made to
> > configuration files that interfere with Axis starting.
> >
> Well,
Kent A. Reed wrote:
> Rather, I'd have to ask what else was changed when the Axiom card was
> installed? Call me an ornery cuss, but I suspect changes were made to
> configuration files that interfere with Axis starting.
>
Well, a very easy way to test it is to try to run glxgears. That may
Eric Keller wrote:
> I'm guessing it has something to do with the real-time system not starting,
> but who knows? In general, being able to diagnose using dmesg first
> requires that one get used to seeing the output of dmesg.
>
OK, well, to us LinuxCNC insiders, Axis not starting is different
On 7/21/2012 5:24 PM, Dave Keeton wrote:
> ...
>
> Sorry if I caused such an uproar just asking a simple question! GEEEZ
> Guys! Just kidding.Yes I should have given more info as I knew
> better being a service tech for CNC machines myself. Sorry, it wont
> happen again! Turns out that long bef
On Sat, 2012-07-21 at 17:02 -0400, Kent A. Reed wrote:
> On 7/21/2012 12:38 PM, Dave Keeton wrote:
> > All,
> >I installed a Axiom ax5214h card in my control. Since doing this
> > the Axis GUI will not start up in my config. TKEMC runs fine. Any help
> > would be appreciated.
> >
> > Dave
>
On Sat, 2012-07-21 at 17:45 +0100, andy pugh wrote:
> On 21 July 2012 17:38, Dave Keeton wrote:
> > All,
> > I installed a Axiom ax5214h card in my control. Since doing this
> > the Axis GUI will not start up in my config. TKEMC runs fine. Any help
> > would be appreciated.
>
> Probably a g
On 7/21/2012 12:38 PM, Dave Keeton wrote:
> All,
>I installed a Axiom ax5214h card in my control. Since doing this
> the Axis GUI will not start up in my config. TKEMC runs fine. Any help
> would be appreciated.
>
> Dave
>
>
Dave:
You've got a lively side-bar exchange going among Andy, Er
On 21 July 2012 18:45, Kent A. Reed wrote:
> Errm. Dave said "Since doing this..." which suggests Axis used to start
> but doesn't start now that he has installed the Axiom card.
I was rather assuming that the Axiom card was a graphics card...
But if Axis doesn't start, but TKlinux does (assumi
On Sat, Jul 21, 2012 at 3:31 PM, Kent A. Reed wrote:
>
> Agreed. It's also my first response to a problem. I haven't done my
> homework to figure out what messages to expect from a balky Axis setup.
> I figured the moment I said "check dmesg output" someone would ask what
> to look for, so I didn'
On 7/21/2012 2:57 PM, Eric Keller wrote:
> On Sat, Jul 21, 2012 at 1:45 PM, Kent A. Reed wrote:
>
>> Rather, I'd have to ask what else was changed when the Axiom card was
>> installed? Call me an ornery cuss, but I suspect changes were made to
>> configuration files that interfere with Axis starti
On Sat, Jul 21, 2012 at 1:45 PM, Kent A. Reed wrote:
>
> Rather, I'd have to ask what else was changed when the Axiom card was
> installed? Call me an ornery cuss, but I suspect changes were made to
> configuration files that interfere with Axis starting.
>
> Logic dictates that if the computer i
On 7/21/2012 12:45 PM, andy pugh wrote:
> On 21 July 2012 17:38, Dave Keeton wrote:
>> All,
>>I installed a Axiom ax5214h card in my control. Since doing this
>> the Axis GUI will not start up in my config. TKEMC runs fine. Any help
>> would be appreciated.
> Probably a graphics card or op
On 21 July 2012 17:38, Dave Keeton wrote:
> All,
> I installed a Axiom ax5214h card in my control. Since doing this
> the Axis GUI will not start up in my config. TKEMC runs fine. Any help
> would be appreciated.
Probably a graphics card or opengl issue, there are possible solutions
to both
All,
I installed a Axiom ax5214h card in my control. Since doing this
the Axis GUI will not start up in my config. TKEMC runs fine. Any help
would be appreciated.
Dave
--
Live Security Virtual Conference
Exclusive
16 matches
Mail list logo