-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 7/15/2013 11:14 PM, Troy Jacobson wrote:
> I'm looking forward to using the new image, and being able to get a
> monitor and keyboard on the BBB. But I want to get a few prints
> from the printer before making that change, so that wont happen for
>
I'm looking forward to using the new image, and being able to get a monitor
and keyboard on the BBB. But I want to get a few prints from the printer
before making that change, so that wont happen for a few days.
I was having difficulty determining the PID settings for my extruder
heater, mostly g
Am 15.07.2013 um 15:27 schrieb Klemen Dovrtel :
> Hello everybody,
>
> I have the linuxcnc beaglebone black up and running. I tested same simple hal
> setup with led blinking and it works fine. I am impressed :)
>
> I set the base-thread to 100 ns (1ms) - this is what i found in other BB
Hello everybody,
I have the linuxcnc beaglebone black up and running. I tested same simple hal
setup with led blinking and it works fine. I am impressed :)
I set the base-thread to 100 ns (1ms) - this is what i found in other BB
hal configurations which were already loaded on the sd card. I
On Thu, 2013-07-11 at 11:17 -0500, Charles Steinkuehler wrote:
> On 7/11/2013 11:06 AM, Sebastian Kuzminsky wrote:
> > On 7/11/13 06:41 , Charles Steinkuehler wrote:
> >> I'll try this out in a day or two when I'm back home. I have had
> >> several people think the system was broken because the LE
On 7/11/2013 11:06 AM, Sebastian Kuzminsky wrote:
> On 7/11/13 06:41 , Charles Steinkuehler wrote:
>> I'll try this out in a day or two when I'm back home. I have had
>> several people think the system was broken because the LEDs were not
>> blinking...I'm guessing not very many people monitor the
On 7/11/13 06:41 , Charles Steinkuehler wrote:
> I'll try this out in a day or two when I'm back home. I have had
> several people think the system was broken because the LEDs were not
> blinking...I'm guessing not very many people monitor the serial console
> of their BeagleBone. :-/
I think th
On 7/11/2013 2:58 AM, Michael Haberler wrote:
>
> Am 11.07.2013 um 05:40 schrieb Troy Jacobson :
>
>> The machinekit image does not flash the LEDs to show activity.
>> Numbers 3 and 5 are on constantly for that image. That's a mistake
>> I made...
>
> sorry, I should have noted that
>
> In the
d card was rewritten with some default beagle board documentation.
>>
>> Regards
>> Klemen
>>
>>
>>
>>
>>
>> From: Charles Steinkuehler
>> To: Klemen Dovrtel ; Enhanced Machine
>> Controller (EMC)
>> Sent:
;
>
> From: Charles Steinkuehler
> To: Klemen Dovrtel ; Enhanced Machine
> Controller (EMC)
> Sent: Tuesday, July 9, 2013 12:40 PM
> Subject: Re: [Emc-users] Beaglebone LinuxCNC starterkit -> Beaglebone Black
>
>
> On 7/9/2013 3:40 AM, Kle
> From: Charles Steinkuehler
> To: Klemen Dovrtel ; Enhanced Machine Controller
> (EMC)
> Sent: Tuesday, July 9, 2013 12:40 PM
> Subject: Re: [Emc-users] Beaglebone LinuxCNC starterkit -> Beaglebone Black
>
>
> On 7/9/2013 3:40 AM, Klemen Dovrtel wrote:
>> He
.
Regards
Klemen
From: Charles Steinkuehler
To: Klemen Dovrtel ; Enhanced Machine Controller
(EMC)
Sent: Tuesday, July 9, 2013 12:40 PM
Subject: Re: [Emc-users] Beaglebone LinuxCNC starterkit -> Beaglebone Black
On 7/9/2013 3:40 AM, Klemen Dovrtel wr
On 7/9/2013 3:40 AM, Klemen Dovrtel wrote:
> Hello everybody,
>
> I noticed the BeagleBone version of LinuxCNC and decided to try it, but it
> seems i was not paying enough attention - I bought the Beaglebone Black
> instead of Beaglebone.
>
> Is there a simple way to make the Beaglebone Linux
Am 09.07.2013 um 10:40 schrieb Klemen Dovrtel :
> Hello everybody,
>
> I noticed the BeagleBone version of LinuxCNC and decided to try it, but it
> seems i was not paying enough attention - I bought the Beaglebone Black
> instead of Beaglebone.
>
> Is there a simple way to make the Beaglebon
Hello everybody,
I noticed the BeagleBone version of LinuxCNC and decided to try it, but it
seems i was not paying enough attention - I bought the Beaglebone Black instead
of Beaglebone.
Is there a simple way to make the Beaglebone LinuxCNC starterkit work on
BeagleBone Black? Can i use the B
15 matches
Mail list logo