Hi
I am trying to create my own homing sequence on the A axis in Gmoccapy.
Is there a way to set the "homed" signal to true once I have done my
sequence?
Regards
Marius
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sou
On Mon, Aug 30, 2021 at 3:23 PM Marius wrote:
> I am trying to create my own homing sequence on the A axis in Gmoccapy.
> Is there a way to set the "homed" signal to true once I have done my
> sequence?
i don't think so, i have added "set-homed" pins to joints for that
purpose a few years ago to
Hi Marius,
Are you driving your A axis with steppers or servos? What are you using as
the physical home switch?
You can always fool the homing sequence at least into some extent. I wanted
to use servos in open loop but that was incompatible with homing with
index. So I bypassed the home switch fo
I meant to say FED no feeded. Some verbs I forgot LOL.
El lun, 30 ago 2021 a las 22:25, Leonardo Marsaglia ()
escribió:
> Hi Marius,
>
> Are you driving your A axis with steppers or servos? What are you using as
> the physical home switch?
>
> You can always fool the homing sequence at least into
On 2021/08/31 03:25, Leonardo Marsaglia wrote:
Hi Marius,
Are you driving your A axis with steppers or servos? What are you using as
the physical home switch?
You can always fool the homing sequence at least into some extent. I wanted
to use servos in open loop but that was incompatible with h
Pretty sure you can do this where you set the home position at homing. (So
it doesn't move). The k&t homes to 38",34"',24 respectively.. it sets
those positions but doesn't then move anywhere else.
On Tue, Aug 31, 2021, 2:04 AM Marius wrote:
>
> On 2021/08/31 03:25, Leonardo Marsaglia wrote:
>
-
From: Sam Sokolik
Sent: Tuesday, August 31, 2021 7:56 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Force homed signal
[EXTERNAL EMAIL] Be sure links are safe.
Pretty sure you can do this where you set the home position at homing. (So it
doesn't move). The k&t ho
esday, August 31, 2021 7:56 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Force homed signal
[EXTERNAL EMAIL] Be sure links are safe.
Pretty sure you can do this where you set the home position at homing. (So it doesn't move).
The k&t homes to 38",34"',24
(EMC)
Subject: Re: [Emc-users] Force homed signal
[EXTERNAL EMAIL] Be sure links are safe.
On 2021/08/31 14:46, Todd Zuercher wrote:
> Pretty sure all you need to do is set your home position equal to your home
> offset in your ini file, then the machine will not command a move when homing