On Thursday 29 August 2019 14:23:57 Gene Heskett wrote:
> On Thursday 29 August 2019 13:31:33 Peter C. Wallace wrote:
> > > Yes, you can see page 2 of the 5I25 manual:
> > >
> > > W1 (P2 POWER ) W2 (P3 POWER)
> > > UP UP BREAKOUT POWER ENABLED
> > > DOWN
On Thursday 29 August 2019 13:31:33 Peter C. Wallace wrote:
> > Yes, you can see page 2 of the 5I25 manual:
> >
> > W1 (P2 POWER ) W2 (P3 POWER)
> > UP UP BREAKOUT POWER ENABLED
> > DOWN DOWN BREAKOUT POWER DISABLED
> > (DEFAULT)
>
> Note
On Thursday 29 August 2019 08:40:03 Todd Zuercher wrote:
[...]
> You can't set the 5i25 to supply 5v to the parallel port BOB, it will
> short out the 5v supply. (parallel port BOBs have those pins all
> connected to ground.)
>
Todd is correct, on the SainSmart board, and depending on which pdf
Yes, you can see page 2 of the 5I25 manual:
W1 (P2 POWER ) W2 (P3 POWER)
UP UP BREAKOUT POWER ENABLED
DOWN DOWN BREAKOUT POWER DISABLED (DEFAULT)
Note that you also need to set the 7I76/7I76D in the correct mode:
W2 left = gets 5V
On Thu, 29 Aug 2019, Gene Heskett wrote:
Date: Thu, 29 Aug 2019 12:55:31 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25
On Thursday 29 August 2019 08:40:03 Todd Zuer
On Thursday 29 August 2019 08:40:03 Todd Zuercher wrote:
> -Original Message-
>
> >From: Gene Heskett
> >Sent: Wednesday, August 28, 2019 7:35 PM
> >To: emc-users@lists.sourceforge.net
> >Subject: Re: [Emc-users] Pin files for 5i25
> >
> >On W
-Original Message-
>From: Gene Heskett
>Sent: Wednesday, August 28, 2019 7:35 PM
>To: emc-users@lists.sourceforge.net
>Subject: Re: [Emc-users] Pin files for 5i25
>
>On Wednesday 28 August 2019 15:57:04 andy pugh wrote:
>
>> On Wed, 28 Aug 2019 at 20
On Wednesday 28 August 2019 20:25:52 Peter C. Wallace wrote:
> http://freeby.mesanet.com/5i25_7i76_5abob.bit
>
> 7I76 on P3, Cheap Ebay "5 Axis" BOB on P2
>
Eggselant Peter, just what I wanted. Twice. :)
> Peter Wallace
> Mesa Electronics
>
> (\__/)
> (='.'=) This is Bunny. Copy and paste bunny
http://freeby.mesanet.com/5i25_7i76_5abob.bit
7I76 on P3, Cheap Ebay "5 Axis" BOB on P2
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
___
On Wednesday 28 August 2019 15:57:04 andy pugh wrote:
> On Wed, 28 Aug 2019 at 20:31, Gene Heskett
> wrote:
>
> In looking at what I have, vs what I need, I need a bit file for
> 5i25's
>
> > with a 7i76D driver on P3, and a std parport bob on P2.
>
> There are pre-existing 5i25_g540_7i76.bit
On Wed, 28 Aug 2019 at 20:31, Gene Heskett wrote:
In looking at what I have, vs what I need, I need a bit file for 5i25's
> with a 7i76D driver on P3, and a std parport bob on P2.
There are pre-existing 5i25_g540_7i76.bit and 5i25_7i76_g540.bit files.
(7i76D is the same pinout as 7i76)
--
On Wednesday 28 August 2019 15:13:29 Gene Heskett wrote:
> On Wednesday 28 August 2019 14:48:14 andy pugh wrote:
> > On Wed, 28 Aug 2019 at 17:25, Marius Liebenberg
> >
> >
> > wrote:
> > > Is there a way to build your own bit files?
> >
> > There are at least 2 ways.
> >
> > You can use the
On Wednesday 28 August 2019 14:48:14 andy pugh wrote:
> On Wed, 28 Aug 2019 at 17:25, Marius Liebenberg
>
>
> wrote:
> > Is there a way to build your own bit files?
>
> There are at least 2 ways.
>
> You can use the command-line tools that exist in the LinuxCNC version
> of the Hostmot2
On Wed, 28 Aug 2019 at 17:25, Marius Liebenberg
wrote:
>
> Is there a way to build your own bit files?
There are at least 2 ways.
You can use the command-line tools that exist in the LinuxCNC version of
the Hostmot2 repository:
https://github.com/LinuxCNC/hostmot2-firmware
(Some info in the
On 8/27/2019 1:36 PM, Marius Liebenberg wrote:
Hi all
I need to set a 5i25 up as a dual lpt port. I want to replace my
mill installation with Path Pilot and I need the pin and bit
files to do that.
Does anyone know where I can go look for the files please?
On Tue, 27 Aug 2019 at 20:19, Marius Liebenberg
wrote:
>
> Hopefully last question. There is a load of files there and the names
> makes no logical sense to me. What file should I be looking at please?
pin files have names that either contain the name of the daughter board
they match (7i76
On Tue, 27 Aug 2019, Marius Liebenberg wrote:
Date: Tue, 27 Aug 2019 21:17:19 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25
On 8/27/2019 8:48 PM, Marius Lieben
On 8/27/2019 8:48 PM, Marius Liebenberg wrote:
On 8/27/2019 1:36 PM, Marius Liebenberg wrote:
Hi all
I need to set a 5i25 up as a dual lpt port. I want to replace my
mill installation with Path Pilot and I need the pin and bit files
to do that.
Does anyone know where I can go look
On 8/27/2019 1:36 PM, Marius Liebenberg wrote:
Hi all
I need to set a 5i25 up as a dual lpt port. I want to replace my
mill installation with Path Pilot and I need the pin and bit files
to do that.
Does anyone know where I can go look for the files please?
On Tue, 27 Aug 2019, Marius Liebenberg wrote:
Date: Tue, 27 Aug 2019 20:25:53 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25
On 8/27/2019 1:36 PM, Marius Liebenberg
On 8/27/2019 1:36 PM, Marius Liebenberg wrote:
Hi all
I need to set a 5i25 up as a dual lpt port. I want to replace my mill
installation with Path Pilot and I need the pin and bit files to do that.
Does anyone know where I can go look for the files please?
--
Regards / Groete
Marius D.
On Tue, 27 Aug 2019, Marius Liebenberg wrote:
Date: Tue, 27 Aug 2019 13:36:35 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Pin files for 5i25
Hi all
I need to set a 5i25 up a
Hi all
I need to set a 5i25 up as a dual lpt port. I want to replace my mill
installation with Path Pilot and I need the pin and bit files to do that.
--
Regards / Groete
Marius D. Liebenberg
082 698 3251
___
Emc-users mailing list
23 matches
Mail list logo