Does anyone use the Xylotex 3 or 4 axis board?
As I understand it all on has to do is plug the parallel cable into
the board and wire up the motors and power supply.
Is there any other all in one cards for steppers?
I noticed that on the EMC2 Supported Hardware page that the Gecko
drives are
I'm using a xylotex 3-axis board. I'm pretty happy with it so far. For
whatever reason, my machine moves reliably at higher speeds (70ipm
instead of 40ipm) in half-step mode than 1/8 step mode, though most
people seem to prefer using the board in 1/8 step configuration.
The connections are very
John Thornton wrote:
Does anyone use the Xylotex 3 or 4 axis board?
Sure, I use a Xylotex 3-axis board for testing things. It is
suitable for Sherline sized machines (NEMA23 motors).
As I understand it all on has to do is plug the parallel cable into
the board and wire up the motors and
On Sunday 09 September 2007, John Thornton wrote:
Does anyone use the Xylotex 3 or 4 axis board?
As I understand it all on has to do is plug the parallel cable into
the board and wire up the motors and power supply.
I have a 3 axis that works great. And I at the time had to build a patchbox
