On 24 June 2012 15:21, Ralph Stirling wrote:
> Andy, I am not using a 7I39, but can work with that pinout fine.
There are two styles of 3-pwmgen. The firmwares with TP in their name
have 6 pins per PWM (complementary high-side and low-side drive, with
a gap to prevent shoot-through) whereas the
nhanced Machine Controller (EMC)
Subject: Re: [Emc-users] bldc hal file example?
2012/6/22 Ralph Stirling
> I have my prototype linear motor assembled and ready
> to test tomorrow. I'm trying to figure out how to connect
> everything in hal, and seem to be missing some pieces of
> t
2012/6/22 Ralph Stirling
> I have my prototype linear motor assembled and ready
> to test tomorrow. I'm trying to figure out how to connect
> everything in hal, and seem to be missing some pieces of
> the puzzle. I want to use a 7I43 to generate the PWM
> signals with the bldc component. I'd l
On 22 June 2012 04:38, Ralph Stirling wrote:
> Andy or Peter (or anybody else), would you have an example
> ini and hal file for generating 3-phase waveforms open loop
> with a 7I43? Do I need a different firmware for 3-phase,
> or can the standard SVST4_12 in conjunction with the bldc
> compone
2012/6/22 Ralph Stirling
> I have my prototype linear motor assembled and ready
> to test tomorrow. I'm trying to figure out how to connect
> everything in hal, and seem to be missing some pieces of
> the puzzle. I want to use a 7I43 to generate the PWM
> signals with the bldc component. I'd l
I have my prototype linear motor assembled and ready
to test tomorrow. I'm trying to figure out how to connect
everything in hal, and seem to be missing some pieces of
the puzzle. I want to use a 7I43 to generate the PWM
signals with the bldc component. I'd like to run open loop
for my initial t