On Sat, 07 Nov 2009 12:40:36 -0600, you wrote:
Just wondering if the G0 speed can be faster then the max feed rate speed.
On all CNC machines I have run (that use Fanuc, Mit, etc controls)
the rapid speed was much faster then the max feed rate speed, like 2
or 3 times.
Yes, that's normal?
2009/11/8 Steve Blackmore st...@pilotltd.net
On Sat, 07 Nov 2009 12:40:36 -0600, you wrote:
Just wondering if the G0 speed can be faster then the max feed rate speed.
On all CNC machines I have run (that use Fanuc, Mit, etc controls)
the rapid speed was much faster then the max feed rate
On Sun, 8 Nov 2009 10:25:46 +, you wrote:
If the G0 speed is higher than max G1 feed rate, wouldn't that mean that
your machine can handle higher speeds than configured?
???
No.
The G0 speed is set in firmware, or configuration files to the maximum
speed your machine can move reliably,
2009/11/9 Steve Blackmore st...@pilotltd.net
On Sun, 8 Nov 2009 10:25:46 +, you wrote:
If the G0 speed is higher than max G1 feed rate, wouldn't that mean that
your machine can handle higher speeds than configured?
???
No.
The G0 speed is set in firmware, or configuration files to
Just wondering if the G0 speed can be faster then the max feed rate speed.
On all CNC machines I have run (that use Fanuc, Mit, etc controls)
the rapid speed was much faster then the max feed rate speed, like 2
or 3 times.
On a step/dir system it is probably not possible but on a servo
machine
2009/11/4 许军 sed...@163.com
emc2 always appear joint 0 following error
You set the speed on the first G0-line: G0 Z50 F3000 (Goto Z 50 with the
Feed of 3000 units/min). Then the speed will be remembered for the rest of
the G0-lines.
The joint 0-error is something different, EMC2 thinks one
许军 pisze:
emc2 always appear joint 0 following error
You must provide more info to help you.
regards,
Michael
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify
On Wed, 04 Nov 2009 09:12 +0100, Sven Wesley svenne.d...@gmail.com
wrote:
2009/11/4 许军 sed...@163.com
emc2 always appear joint 0 following error
You set the speed on the first G0-line: G0 Z50 F3000 (Goto Z 50 with the
Feed of 3000 units/min). Then the speed will be remembered for
2009/11/4 John Kasunich jmkasun...@fastmail.fm
G0 is a rapid traverse move and always goes at the speed determined by
the ini file limits. It is NOT affected by an F value in the g-code.
The F only sets the feed rate for G1, G2, G3, and other cutting moves.
John Kasunich
You're right
emc2 always appear joint 0 following error
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best,
10 matches
Mail list logo
