Although they recommend against it, you can actually edit the grub.cfg file
just as you previously edited the menu.lst file. If you subsequently do
update-grub, your changes will be overwritten.
Neil
On Sun, Dec 19, 2010 at 10:43 PM, Erik Christiansen dva...@internode.on.net
wrote:
On Sat,
On Sat, Dec 18, 2010 at 04:49:35PM -0500, Dave Christman wrote:
On 12/18/2010 4:05 PM, andy pugh wrote:
On 18 December 2010 20:55, Kirk Wallacekwall...@wallacecompany.com wrote:
A common problem with the install script is that the original Linux will
boot instead of real time Linux.
It
On 12/17/2010 3:18 AM, Viesturs Lācis wrote:
2010/12/17 Dave Christmanmail4da...@gmail.com:
On 12/15/2010 8:45 AM, Jeff Epler wrote:
On Tue, Dec 14, 2010 at 04:48:39PM -0500, Dave Christman wrote:
I get an error every time I open axis with a machine that is configured
in stepconfig in inches.
On 18 December 2010 18:36, Dave Christman mail4da...@gmail.com wrote:
CNC EMC2 was not to be found under the Applications pulldown menu
What happens if you type emc at the command prompt?
--
atp
Torque wrenches are for the obedience of fools and the guidance of wise men
On 12/18/2010 1:51 PM, andy pugh wrote:
On 18 December 2010 18:36, Dave Christmanmail4da...@gmail.com wrote:
CNC EMC2 was not to be found under the Applications pulldown menu
What happens if you type emc at the command prompt?
I am not very familiar with Ubuntu or unix. If you mean from the
2010/12/18 Dave Christman mail4da...@gmail.com:
On 12/18/2010 1:51 PM, andy pugh wrote:
On 18 December 2010 18:36, Dave Christmanmail4da...@gmail.com wrote:
CNC EMC2 was not to be found under the Applications pulldown menu
What happens if you type emc at the command prompt?
I am not very
On 12/18/2010 3:14 PM, Viesturs Lācis wrote:
2010/12/18 Dave Christmanmail4da...@gmail.com:
On 12/18/2010 1:51 PM, andy pugh wrote:
On 18 December 2010 18:36, Dave Christmanmail4da...@gmail.com wrote:
CNC EMC2 was not to be found under the Applications pulldown menu
What happens if you
On Sat, 2010-12-18 at 15:36 -0500, Dave Christman wrote:
On 12/18/2010 3:14 PM, Viesturs Lācis wrote:
... snip
Save the file, right click and in permissions and mark allow
execution of file or something similar. Then doubleclick on it - it
should ask for Your password and automagically
On 18 December 2010 20:55, Kirk Wallace kwall...@wallacecompany.com wrote:
A common problem with the install script is that the original Linux will
boot instead of real time Linux.
It should be possible to see which kernel has booted with
uname -r
If you don't see -rtai at the end of the
On 12/18/2010 4:05 PM, andy pugh wrote:
On 18 December 2010 20:55, Kirk Wallacekwall...@wallacecompany.com wrote:
A common problem with the install script is that the original Linux will
boot instead of real time Linux.
It should be possible to see which kernel has booted with
uname -r
On 18 December 2010 21:49, Dave Christman mail4da...@gmail.com wrote:
The response to uname -r from the terminal window is 2.6.32-26 generic.
What is a grub, and how do I beat it up?
Grub is the boot utility which chooses the kernel to start up with.
You can probably press a magic key at
2010/12/17 Dave Christman mail4da...@gmail.com:
On 12/15/2010 8:45 AM, Jeff Epler wrote:
On Tue, Dec 14, 2010 at 04:48:39PM -0500, Dave Christman wrote:
I get an error every time I open axis with a machine that is configured
in stepconfig in inches.
[...]
EMC2 - 2.3.0
version 2.3.0 is quite
On 12/15/2010 8:45 AM, Jeff Epler wrote:
On Tue, Dec 14, 2010 at 04:48:39PM -0500, Dave Christman wrote:
I get an error every time I open axis with a machine that is configured
in stepconfig in inches.
[...]
EMC2 - 2.3.0
version 2.3.0 is quite old (20 months or so) and its version of
I get an error every time I open axis with a machine that is configured
in stepconfig in inches.
Works fine when I config machine in mm.
What am I doing wrong?
The error is:
EMC2 terminated with an error. When reporting problems, pleas include
all the information below in your message.
On Tue, Dec 14, 2010 at 04:48:39PM -0500, Dave Christman wrote:
I get an error every time I open axis with a machine that is configured
in stepconfig in inches.
[...]
EMC2 - 2.3.0
version 2.3.0 is quite old (20 months or so) and its version of stepconf
had a large number of bugs. Please
On 12/14/2010 02:48 PM, Dave Christman wrote:
I get an error every time I open axis with a machine that is configured
in stepconfig in inches.
Works fine when I config machine in mm.
What am I doing wrong?
The error is:
Thanks for sending out the error message! Many programs - including
On 15 December 2010 14:34, Sebastian Kuzminsky s...@highlab.com wrote:
So the reason it won't start up is that it can't find the ini file you
specified.
How do we specify an ini file? I have never quite figured out if it is
derived from the folder name, whether the startup dialogue scan for
On 12/15/2010 07:42 AM, andy pugh wrote:
On 15 December 2010 14:34, Sebastian Kuzminskys...@highlab.com wrote:
So the reason it won't start up is that it can't find the ini file you
specified.
How do we specify an ini file? I have never quite figured out if it is
derived from the folder
On 15 December 2010 15:41, Sebastian Kuzminsky s...@highlab.com wrote:
There are three ways that I know of to pick the config file:
shell emc
Start the pickconfig config picker.
Presumably this lists all ini files in the config tree?
Depending on how Dave is starting EMC2, it would seem
andy pugh wrote:
On 15 December 2010 15:41, Sebastian Kuzminskys...@highlab.com wrote:
There are three ways that I know of to pick the config file:
shell emc
Start the pickconfig config picker.
Presumably this lists all ini files in the config tree?
Depending on how Dave
On 12/11/2010 02:56 PM, Dave Christman wrote:
I get an error every time I open axis with a machine that is configured
in stepconfig in inches.
Works fine when I config machine in mm.
What am I doing wrong?
While making further changes and experimentation, I noticed that any
file that I
As Jeff already said your version is pretty old.
The bug (space within filename) is part of stepconf, and has been fixed a
long time ago. You should _really_ upgrade your emc2 version. Especially
since you are starting fresh, so you won't have to bother with config
changes from version to
I get an error every time I open axis with a machine that is configured
in stepconfig in inches.
Works fine when I config machine in mm.
What am I doing wrong?
--
Oracle to DB2 Conversion Guide: Learn learn about native
On 12/11/2010 02:56 PM, Dave Christman wrote:
I get an error every time I open axis with a machine that is configured
in stepconfig in inches.
Works fine when I config machine in mm.
What am I doing wrong?
If you don't tell us what the error is, it's very, very hard for us to
guess what's
24 matches
Mail list logo