> From: jp@hotmail.com
> To: emc-users@lists.sourceforge.net
> Date: Thu, 13 Dec 2012 21:07:40 +0100
> Subject: Re: [Emc-users] linear scales Heidenhain
>
>
> Dear Viesturs,
>
>
> Thanks for your reply. I m sure that these linear scales from Heide
values upto 16.
Tim
Sent from my BlackBerry® wireless device
-Original Message-
From: Thomas J Powderly
Date: Fri, 14 Dec 2012 15:13:49
To: Enhanced Machine Controller (EMC)
Reply-To: "Enhanced Machine Controller \(EMC\)"
Subject: Re: [Emc-users] linear scales Heidenhain
On 14 December 2012 21:13, Thomas J Powderly wrote:
> it's 'sorta like a resolver' :)
> and EXE boxes are expensive ( i got a set of 4 but i use them :| )
Sounds like an easy enough job for the AtoD on an Arduino.
Basically like my Arduino Resolver convertor (abandoned) without the
sine-wave ge
t;> From: viesturs.la...@gmail.com
>> Date: Thu, 13 Dec 2012 19:49:44 +0200
>> To: emc-users@lists.sourceforge.net
>> Subject: Re: [Emc-users] linear scales Heidenhain
>>
>> 2012/12/13 jean-paul coninx:
>>
>>>
>>> Dear emc users,
>&
> Subject: Re: [Emc-users] linear scales Heidenhain
>
> 2012/12/13 jean-paul coninx :
> >
> >
> > Dear emc users,
> >
> > I am an owner from a maho mhc 700c with a heidenhain tnc 135 controller.
> > The controller doesn t work any more.
> > I hav
: [Emc-users] linear scales Heidenhain
>
> On 13 December 2012 17:39, jean-paul coninx wrote:
>
> > I am an owner from a maho mhc 700c with a heidenhain tnc 135 controller.
> > The controller doesn t work any more.
> > I have read something about retrofitting. The
On 13 December 2012 17:39, jean-paul coninx wrote:
> I am an owner from a maho mhc 700c with a heidenhain tnc 135 controller. The
> controller doesn t work any more.
> I have read something about retrofitting. The most people use the Mesa cards
> in combination with Linuxcnc. For already a few
2012/12/13 jean-paul coninx :
>
>
> Dear emc users,
>
> I am an owner from a maho mhc 700c with a heidenhain tnc 135 controller. The
> controller doesn t work any more.
> I have read something about retrofitting. The most people use the Mesa cards
> in combination with Linuxcnc. For already a few
Dear emc users,
I am an owner from a maho mhc 700c with a heidenhain tnc 135 controller. The
controller doesn t work any more.
I have read something about retrofitting. The most people use the Mesa cards in
combination with Linuxcnc. For already a few years (no time like everyone) I a
bough