Chris Radek escribió:
> On Mon, Feb 02, 2009 at 02:02:51AM +0100, Arnold Riter CNC wrote:
>
>> The threading are incorrect, so I've been looking to what can be wrong,
>> and I find that the "motion.spindle-revs" not correspond with the reality.
>> When there is only 1 to 5 revolution the value
On Mon, Feb 02, 2009 at 02:02:51AM +0100, Arnold Riter CNC wrote:
>
> The threading are incorrect, so I've been looking to what can be wrong,
> and I find that the "motion.spindle-revs" not correspond with the reality.
> When there is only 1 to 5 revolution the value is almost correct, but
> whe
If the encoder position in hal generally tracks the correct position but
gets worse over multiple revolutions, I would look to problems outside
the PC. For instance, if the problem is not present when you turn the
spindle by hand, then it could be noise from the spindle motor coupled
into the enco
Hi
I've been trying to configure my lathe for threading and I think I'm
missing something.
I have the 5i20+7i33 mesa card + servos + 100 lines encoder attached to
the spindle
The threading are incorrect, so I've been looking to what can be wrong,
and I find that the "motion.spindle-revs" not c
