In rescue mode type:
mount /dev/hdx -t reiserfs /mountpoint
-Chris
On Wed, 14 Jun 2000, you wrote:
>
>
>
> Hello!
>
> Yesterday I started to install Mandrake 7.1.
> All went correctly until a choosed in the middle of the installation to check
> for PCI devices, ...my system crashed! (freeze
Jason Straight wrote:
> Nevermind, I figured it out. The permissions on /usr/bin/suexec were wrong,
> needed to be suid root.
This has to be the SLOWEST mailing list I have ever seen, anyone know what's up
with that?
--
Sir, I'm afraid your computer has the Microsoft virus that's been spread
Denis HAVLIK <[EMAIL PROTECTED]> writes:
> Because Pixel detests ISA.
is not the only mdk developer who don't like ISA :
--
MandrakeSoft Inchttp://www.mandrakesoft.com
San Diego, CA USA --Chmouel
[EMAIL PROTECTED] said:
> Don't see a point why the Helixupdate should be included in
> distribution.
maybe not everyone has a T1 to the net?
some people (in australia for example) pay for every MB they receive, *and*
have to download over 33.6K modems.
That in itself is a good enough reason
This question pops up now and then--there are web sites
that just plain look bad--grammatical errors and
run-together text or else ? characters where tothers
should be.
Her is the fix.. Not for you but for the unfortunate
authors of the web sites.
http://www.fourmilab.ch/webtools/demoroniser/
Hi
How do I configure the postfix MTA? I am prety familiar with sendmail
after running it on RHL for a long time. Basically, I would like it
to send mails from my [EMAIL PROTECTED] rather that user@localhost. I
would also need functionality to send mail from a web based address,
like say [EMA
Hi folks,
Ive tried compiling the latest version of Gkrellm in Mandrake 7.1 and
7.0. this is version 0.9.10.
It works in 7.0 but not 7.1. 0.9.7 is what was released from the
distribution but it varies a little bit which is why I wanted to
upgrade. Ive even tried to intall binary RPMs from the
the idebus refers to pci/ide bus speed, and it's isn't as same as your
system bus speed. The standard is 33Mhz even on the latest of the latest
motherboards(my company ships machines with Tyan boards that aren't on the
market yet). Normally, if you want to set the idebus, you'd put in:
Your vm gateway shouldn't be set to your linuxbox unless you've configured
ip masquerading/chaining on the linuxbox. Try setting your vm gateway to
whatever that the linuxbox is using for gateway.
John Kim
Linux System Engineer @ ASL - visit us as www.aslab.com
On Tue, 13 Jun 2000, LinuxMan :-)
This is used very sparsely by the mandrake team when there are gaping
security holes one of the nice things about helix gnome is its
update tool, and I'm pretty disappointed if they didn't include it with
the helix gnome updates.
Rich
--- "LinuxMan :-)" <[EMAIL PROTECTED]> wrote:
> hi
> the
Hello,
if i login as root an console 1 and want to switch to another user with
su frank
i get :
bash: /dev/tty1: permission denied
(with Mandrake 7.1)
i tried the same with Mdk7.0 - there is no such message.
bye
--
Andre Steden <[EMAIL PROTECTED]>
On Wed, 14 Jun 2000, you wrote:
> Does a driver exist for the sound card? (The modem I could care less about
AFAIK No driver exists, it works as a soundblaster clone under windows, so that
might help. The 4450, is mostly a windows machine, I have a small 1.2G drive in
it that I use for playing wi
Do you have the DNS servers listed in the /etc/resolv.conf file/
Don
On Tue, 13 Jun 2000, you wrote:
>
> hi all ! :-)
>
> well , here goes :
>
> a am running mandrake 7.1 on my amd 700mhz box , and i have vmware
> installed
> running win2k.
> samba is working just fine
Hi,
There's an article in the Linux-Magazine of february 2000 written by Lou
Grinzo explaining step-by-step how to configure the Millennium G400 Dual
Head. I think that the article can be get-it online in www.linux-mag.com
because is a old magazine. If not you can wait a few months that they
will
Andrew Vogel wrote:
>
> On Tue, 13 Jun 2000 03:24:20 +0300, you wrote:
>
> >I just did a test install of Mandraka 7.1 on a Acer laptop and created
> >the auto install boot disk during that.
> >
> In which option set is the "make auto install disk" feature available? I
> did a normal SERVER insta
On Tue, Jun 13, 2000 at 03:30:50PM +0200, LinuxMan :-) wrote:
> hi all !
>
> when booting lilo i am getting :
>
> li 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
> 04 04 04
> 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
> 04 04 04
>
On Mon, 12 Jun 2000, you wrote:
> Ok, here's the scenario. I'm trying to setup a Linux box here at work.
> What I'm trying to figure out is what I need to do to log into our network
> (WinNT Enterprise). Any thoughts?
--
Check out the samba smb client,
it connects you to win 9x/nt4 shares
On Tue, 13 Jun 2000, you wrote:
> What does "(ext2) is designed properly, so there's no need" mean?
>
> No filesystem can be designed to eliminate fragmentation. If
> you are constantly "churning" on your disk, especially if your
> disk is > 80% full, it *will* become fragged.
>
> Of course,
Olivier,
Hi - have the same video card, same problem after installing Mdk7.1
and using XFree86 4.0 - in the file /etc/X11/XF86config and in the
file /etc/X11/XF86config-4, under the 'Device' section there should be
a line about 'sw_cursor' - uncomment out this line in these 2 files
then restart th
On Tue, 13 Jun 2000, you wrote:
> Since upgrading from 'Drake 6.1, I have been unable to print from my Linux box
> to a printer attached to a Windows machine elsewhere on my network. The printer
> does work, other machines can print to it.
>
I had the exact same problem after doing a fresh inst
Hi,
I need to have an automatic installation of LM7.1 with reiserfs.
I played with the expert-mode and made an auto_install floppy,
I even tried the auto_install.cfg.pl in /root which is the same like
using the expert-mode.
My problems:
- Without kudzu the eth0 interface isn't detected because th
Daniel Woods wrote:
> During the install process, LM7.1 only picked up one of my ethernet
> cards (PCI D-link DFE-1530TX 10/100) which it recognized as a "Realtek
> 8139 10/100 (rt18139)" (I assume that's ok). My regular ISA 3c509 card
> was not recognized, why ?
>
> I want this machine as a fire
By the way, Denis...is it NORMAL to not be able to edit
your COMPLETE comments before submitting them?
I had to re-do my comments three or four times the other
day before I got what I *wanted* because every time I
previewed the comment and then wanted to make changes, my
comment was either incomp
It has been awhile sine I installed it, if I remember correctly this should
prompt you for it.
zpasswd /var/share/zope/access
- Original Message -
From: lnx4fun <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 13, 2000 4:32 PM
Subject: [expert] Zope superuser password
> I
You need to install the apache-suexec RPM.
http://coruscant.netrevolution.com/pub/AES/Apache-Stable/ISPtools/
- Original Message -
From: Jason Straight <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 13, 2000 4:31 PM
Subject: [expert] apache suexec
> What does it take to
This may be what you are looking for...
http://freshmeat.net/appindex/2000/04/24/956600116.html
- Original Message -
From: James <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, June 13, 2000 11:50 AM
Subject: [expert] Backing everything up
> I'm trying
Hmmm... why Kde? It's basically windows98 with more options... QT widget
set is a resource hog...
-Original Message-
From: LinuxMan :-) [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 14, 2000 5:35 AM
To: [EMAIL PROTECTED]
Subject: Re: [expert] Helix-update in 7.1
hi
there is mandrake
Supposedly defragging is unnessecary in Linux. The Ext2 file system doesn't
get fragmented or something. Can anyone confirm/trash this idea?
-Original Message-
From: Thompsson [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 14, 2000 7:38 AM
To: [EMAIL PROTECTED]
Subject: Re: [expert] De
I, too, was impressed, but I find that MDK is too childish... what I mean
is, the GUI is all bubbly and too much like Windows. I suppose I'm just
used to Redhat and Slackware where the GUI is how I want it to be and I can
do what I want - easily.
Once again, just my opinion.
-Original Messag
Civileme wrote:
>
> It is relatively simple to prove that the most efficient method
> of storing information for lookup is to have it sorted (or where
> the individual information objects are large, to have a sorted
> index) and to search the index on a binary basis--that is, look
> in the middl
Hi,
I'm facing an annoying problem here that seems to be trival
but I cannot find any good explanation. I've got fetchmail
running from cron and a .fetchmailrc in my /home directory
set up with 'chmod 0600'. The result is there exists a fetchmail
process for a root and fetchmail for a user wich w
Thanks for all discussion! It sounds an interesting issue.
As I know the function of fsck is different from that of Defrag. Fsck
check the the file system and fix the error. While Defrag optimize the HD
further. CPU, RAM, MB, speed of HD,PCI are important for the overall
performance of comput
Should be under system or show up as a soda can on one of your applet
panels... but then again I've installed helix gnome on about 6-7 different
machines and it seems like the default layout is different on each one
(some have the soda can launcher, some dont, some default in with the
narrow top P
Hello!
Yesterday I started to install Mandrake 7.1.
All went correctly until a choosed in the middle of the installation to check
for PCI devices, ...my system crashed! (freeze).
So I tryied to restart in rescue mode, but my problem is that I choosed the new
reiserFS, and I
´m not able to mo
Asus, ABit, and Gigabyte make the best Athlon boards.
Kerry Waldrip <[EMAIL PROTECTED]> on 06/13/2000 07:27:45 AM
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject:[expert] Hardware Help Request
I have to upgrade! I'm running MD 7.0 on a Cyrix 166 chi
On Tue, Jun 13, 2000 at 03:50:56AM -0700, James wrote:
-> I'm trying to find the best method for backing up my vital files from my
-> server to a writable CD. I am using Mandrake 7.02 and I am wondering if
-> there is a common procedure for backing up things like pop3 mail users,
-> settings, lin
Kerry Waldrip wrote:
> I have to upgrade! I'm running MD 7.0 on a Cyrix 166 chip and an antiquated
> video card. I'm going to purchase an Athlon processor, but have no idea for a
> good motherboard. I'd really appreciate some good suggestions. Not a techie
> just yet. TIA!
Kerry,
CPUAM
Here's some things to check for:
- IP Masquerading is on
- forwarding is on for the address of the virtual machine
/sbin/ipchains -A forward -s 192.168.x.x/24 -j MASQ
where 192.168.x.x is the IP address given to win2k
- Gateway on the win2k vm is set to the vmware IP address (not the
external add
I had to go to the Helixcode.com site and download the
package.. Worked fine..
SAM
--- Richard Kemp <[EMAIL PROTECTED]> wrote:
> Hello all! A couple of questions about Gnome in
> Mandrake 7.1. I know
> the Helix Gnome improvements have been included, but
> I don't see the
> helix-update program.
:~>On Mon, 12 Jun 2000, you wrote:
:~>> Jason Straight <[EMAIL PROTECTED]> writes:
:~>>
:~>> > It's based on fvwm - you'll have to edit the menu files there I believe.
:~>>
:~>> wrong !! see /usr/doc/menu-*/menu.txt for documentation
:~>>
:~>
:~>OK, I worked out that if I make an entry in /usr/
Submitted 13-Jun-00 by Alex V Flinsch:
> On Mon, 12 Jun 2000, you wrote:
> > Jason Straight <[EMAIL PROTECTED]> writes:
> >
> > > It's based on fvwm - you'll have to edit the menu files there I believe.
> >
> > wrong !! see /usr/doc/menu-*/menu.txt for documentation
> >
>
> OK, I worked out th
Nevermind, I figured it out. The permissions on /usr/bin/suexec were wrong,
needed to be suid root.
Jason Straight wrote:
> What does it take to use the suexec wrapper with mandrake 7.1?
>
> simply putting in apache's config the userid I want to run my cgi's
> doesn't seem to work.
>
> It s
Are you using host based networking? If not, and you only have one NIC card,
you should be. Then, within the TCP/IP properties in Vmware, make sure the
default gateway is set to the IP address of your Linux machine...
-Chris
On Tue, 13 Jun 2000, LinuxMan :-) wrote:
>
> hi all ! :-)
>
> well
:~>During the install process, LM7.1 only picked up one of my ethernet
:~>cards (PCI D-link DFE-1530TX 10/100) which it recognized as a "Realtek
:~>8139 10/100 (rt18139)" (I assume that's ok). My regular ISA 3c509 card
:~>was not recognized, why ?
Because Pixel detests ISA.
--
Tue, Jun 13, 2000 at 10:36:46AM -0700 Richard Kemp raðë:
> Hello all! A couple of questions about Gnome in Mandrake 7.1. I know
> the Helix Gnome improvements have been included, but I don't see the
> helix-update program.
>
> Anyone know where this program is in Mandrake 7.1? Also, are there an
:~>As a convenience to this list, I will burn MDK 7.1 onto two CD's at a cost
:~>of $5.50 for my time, my CD-R media, and shipping costs.
:~>
The more the merrier.
:~>If interested, just send me an E-mail requesting my mailing address.
:~>
:~>I'm not trying to make a fortune or get rich. It se
Greetings:
I've had the following problems in trying to install 7.1 on a couple of
notebooks at the office. I've cycled through all combinations of test,
expert and the like hoping to hit a combo that worked, but no luck:
Digital HiNote Ultra 2000, P266: Keyboard/mouse non-functional after
On Tue, Jun 13, 2000 at 06:50:18PM -0500, Ron Johnson, Jr. wrote:
> > > Could any body know there is any utility like Defrag under Windows for
> > > optimization of Hard disk in Mandrake 6.0 or RPM in higher version?
> >
> > No, the Linux file system is designed properly, so there's no need.
>
Civileme <[EMAIL PROTECTED]> writes:
> > On Mon, 12 Jun 2000, you wrote:
> > > Dear all:
> > >
> > > Could any body know there is any utility like Defrag under Windows for
> > > optimization of Hard disk in Mandrake 6.0 or RPM in higher version?
> > >
> > >
> > > Thanks in advance,
> > >
> > >
i dont have zope installed at the moment, but recall it telling me where it was
placed during install. zope creates its own passwrd.
On Tue, 13 Jun 2000, you wrote:
> I have installed the Zope package along with Mandrake 7.1.
>
> What is the default superuser password? I was able to use the roo
Hey Joel,
This does it for me:
chmod a+x /usr/X11R6/bin/imwheel
Mike
Joel Stanley wrote:
>
> Hi folks, I was wondering if someone could help me figure out what might
> be going on with my recent upgraded to 7.1 from 6.0.
>
> I'm at runlevel 3. I log in as root and KDE fires up. Mousewh
Hi folks, I was wondering if someone could help me figure out what might
be going on with my recent upgraded to 7.1 from 6.0.
I'm at runlevel 3. I log in as root and KDE fires up. Mousewheel works
flawlessly.
But, (still at runlevel 3) I log in as a user and KDE fires up. Mousewheel is
broken.
Hi,
I want to run xntpd on my system. What happens is that I have a laptop which
I take offline. When I do that, I usually close the cover and reopen it so I
don't have to go thru the whole boot sequence. I've noticed, though, that
when I do that, xntpd evenntually dies and I have to restart it m
Does a driver exist for the sound card? (The modem I could care less about
as long as I've got ethernet) And was your experience on 7.0 or 7.1?
-David Talbot
At 04:24 PM 6/14/00 -0400, you wrote:
>On Wed, 14 Jun 2000, you wrote:
>> I'm looking at potentially installing linux on an HP Pavilion 64
Yeah, this seems to be the case with the 7.x installations. Just step
past the x configuration section and once done installing and rebooted,
run XFdrake, and it should configure it fine now(using LCD 1024x768,
etc... as monitor setting).
John Kim
Linux System Engineer @ ASL - visit us as www.as
N/M It just looks that way during the test :)
Eric Peters Mail:[EMAIL PROTECTED]
System Admin Network Operations
Inherent Technologies Inc.
office (503)224-6751 ext 224
> -Original Message-
>
On Wed, 14 Jun 2000, you wrote:
> I'm looking at potentially installing linux on an HP Pavilion 6470Z and I
> wanted to know how well Mandrake 7.0 or 7.1 load the hardware. Anyone have
> any install experience with one of these?
Don't know about the 6470Z model, but I had it installed on my 4450.
do a "chmod 4755 /usr/sbin/suexec".
Jean-Michel Dault
[EMAIL PROTECTED]
On Tue, 13 Jun 2000, Jason Straight wrote:
> Date: Tue, 13 Jun 2000 11:31:23 -0400
> From: Jason Straight <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
> Subject: [expert]
Hey gang
I'm sitting here installing 7.1 on my boss's laptop which is a dell inspiron
7000 with an ATI Mach64 w/ 4 megs of memory. but when I choose any lcd panel
or monitor the test screen dose come up but the panel is acting like the
refresh rate is way low (i.e. when you see computer monitors
I'm looking at potentially installing linux on an HP Pavilion 6470Z and I
wanted to know how well Mandrake 7.0 or 7.1 load the hardware. Anyone have
any install experience with one of these?
-David Talbot
Is it possible to buy CDs of Helium in Paris ? Where (FNAC only has the 7.0 PP
until yesterday)...
hi
there is mandrake update from the kde env.
doono about gnomeswitch to kde :-)
At 10:36 13/06/2000 -0700, you wrote:
>Hello all! A couple of questions about Gnome in Mandrake 7.1. I know
>the Helix Gnome improvements have been included, but I don't see the
>helix-update program.
>
>Anyone
Hi Daniel,
THIS IS THE THIRD TIME I'VE RESPONDED TO THIS QUESTIONS
ON THIS EXACT SUBJECT (3c509) IN THE LAST FOUR DAYS.
I HOPE THE MANDRAKE GUYS ARE PAYING ATTENTION.
3com 3c509 is/was one of the most popular NIC's around,
something should be done to address this issue at install time.
Enough w
> > On Mon, 12 Jun 2000, you wrote:
> > > Dear all:
> > >
> > > Could any body know there is any utility like Defrag under
> > Windows for
> > > optimization of Hard disk in Mandrake 6.0 or RPM in higher version?
> > >
> > >
> > > Thanks in advance,
> > >
> > > Wei Quan Tian
> >
You have de
Hi all
I have just installed MDK 7.1 and i most say that
i have never seen better..Ww
Now i can skip my damn Windows 98
And be a real LINUX MAN:)
Thats was all from me
Was that $5.50 Plus Media Plus shipping?
or $5.50 all up?
--
+++
Allen Bolderoff <[EMAIL PROTECTED]>
LNC - Linux, help and commentary http://linux.netnerve.com
CTPC - Caffeine - get it here: http://www.coffee-tea-pots-cup
http://step.polymtl.ca/~ldd/ext2fs/ext2fs_toc.html
Will give you a great insight into the ext2 filesystem
Basically the disk is broken into blocks (logical and physical)
and files are broken into blocks and fragments. When enough
fragments are available at the tail of a file to fill a (logical)
On Mon, 12 Jun 2000 - TK Kim, you wrote:
| Neither.
| I am kinda sick of Netscape, too. I am probably gonna have to pay for
| saying this, but IE5 is a wholelot better browser.
I simply use KDE's file manager to read web pages. kfm does not do all the
tricks the big guys do, but it can
I don't know if there is an Outlook-compatible email program for Linux or
not. However, if you must use Outlook for business reasons, it runs very
nice under WINE.
-Chris
On Wed, 14 Jun 2000, Kikta LCpl Jason M wrote:
> I have two questions. First, where can I get a good driver for a HP
I have two questions. First, where can I get a good driver for a HP
LJ 8000 and a HP LJ 4050T? I can't seem to find them on the HP website.
Second, my organization uses MS Outlook (unfortunately). Is there a client
available that will allow me to access my mail with minimal loss of
Outlook
During the install process, LM7.1 only picked up one of my ethernet
cards (PCI D-link DFE-1530TX 10/100) which it recognized as a "Realtek
8139 10/100 (rt18139)" (I assume that's ok). My regular ISA 3c509 card
was not recognized, why ?
I want this machine as a firewall & IP Masq, web and mail se
> When the CD comes up with the first screen and it says "hit F1
> for help". Try it.
>
> You will find text install/expert mode at your fingertips, and
> also graphic installs where you preset the memory, and yes, even
> how to use the CD as a rescue. I am seeing complaints about
> leaving out
In Mandrake 7.1
"~/.menu/" works only in IceWM?
> -> > On 12 Jun, TK Kim wrote:
> -> > > Neither.
> -> > > I am kinda sick of Netscape, too. I am probably gonna have to pay for
> -> > > saying this, but IE5 is a wholelot better browser.
Actually, the Netscape-package as shipped with helium is quite nice. Just
make sure the required compat-lib
"Brash, Matthew" wrote:
>
> I sent out an email about this before... my Mandrake 7.1 is giving me a
> "Neighbour Table Overflow" message in my console when I either run more than
> one user or if I run X on my machine. (Pentium III 450, 128M, 3DFX Voodoo3
> 3000, SCSI burner and CDROM, 2 HDD...
Kerry Waldrip wrote:
>
> I have to upgrade! I'm running MD 7.0 on a Cyrix 166 chip and an antiquated
> video card. I'm going to purchase an Athlon processor, but have no idea for a
> good motherboard. I'd really appreciate some good suggestions. Not a techie
> just yet. TIA!
It is hard to
I had this problem before. It stemmed from my 7.1 beta install detecting only
half of my video RAM. But this may or may not be your problem. ;)
I edited the XFree86-4 config file by had with the correct amount of RAM and it
worked fine.
-- Stephen
Bonne chance.
On Tue, 13 Jun 2000, you wrote:
Yes, Microtouch works great..
Denis HAVLIK wrote:
>
> :~>Does anyone have a touchscreen driver for mandrake linux or know where i
> :~>could find one? it would really be appreciated. thank you.
>
> It comes with your system...
>
> man XF86Config:
>
> Elographics (Elographi
I have a strange problem, to wit:
With a fresh install of Mandrake(7.0 and 7.1) i can install my Western
Digital 8013 with "modprobe wd" and my sound card with "sndconfig". When I
the reboot for any reason both fail tp come back up, both modprobe and
sndconfig give the message "device busy". This
"Brian T. Schellenberger" wrote:
>
> WeiQuan Tian wrote:
> >
> > Dear all:
> >
> > Could any body know there is any utility like Defrag under Windows for
> > optimization of Hard disk in Mandrake 6.0 or RPM in higher version?
> >
> > Thanks in advance,
> >
> > Wei Quan Tian
>
> No, the Linux
Necrotica wrote:
> There isn't one - at least that I know of. Although the ext2 filesystem is not
> totally completely immune from fragmentation it does much better than any FAT*
> system.
>
> -Chris
>
> On Mon, 12 Jun 2000, you wrote:
> > Dear all:
> >
> > Could any body know there is any utili
I wrote:
> ...
> Did an mdk7.1 install on the problem machine and
> chose XFree 3.3.6 instead since the owner wanted
> less problems. Ho, ho. However, when the machine
> boots mdk, it hangs when X is starting.
> ...
Remembered that we could use the install CD to do
a "rescue" boot. Found that
During the install process, LM7.1 only picked up one of my ethernet
cards (PCI D-link DFE-1530TX 10/100) which it recognized as a "Realtek
8139 10/100 (rt18139)" (I assume that's ok). My regular ISA 3c509 card
was not recognized, why ?
I want this machine as a firewall & IP Masq, web and mail se
On Mon, 12 Jun 2000, you wrote:
> Jason Straight <[EMAIL PROTECTED]> writes:
>
> > It's based on fvwm - you'll have to edit the menu files there I believe.
>
> wrong !! see /usr/doc/menu-*/menu.txt for documentation
>
OK, I worked out that if I make an entry in /usr/lib/menu the application wi
hi all ! :-)
well , here goes :
a am running mandrake 7.1 on my amd 700mhz box , and i have vmware installed
running win2k.
samba is working just fine and the 2 Os's are pinging each other and
sharing files.
i can browse from the vm to Linux but i cannot browse from the vm to
the internet.
i th
> When the CD comes up with the first screen and it says "hit F1
> for help". Try it.
>
> You will find text install/expert mode at your fingertips, and
> also graphic installs where you preset the memory, and yes, even
> how to use the CD as a rescue. I am seeing complaints about
> leaving out
Since upgrading from 'Drake 6.1, I have been unable to print from my Linux box
to a printer attached to a Windows machine elsewhere on my network. The printer
does work, other machines can print to it.
I have Samba 2.0.6 installed (not from rpm) in /usr/local/samba and I have
changed /usr/lib/rh
Check linuxdoc.org, I believe there is a Oracle8i HOWTO.
- Original Message -
From: Irwan Hadi <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 13, 2000 7:55 AM
Subject: [expert] Suggestion
> My friend wants to make a linux server with Oracle 8i, which can be
> accessed fo
Hello all! A couple of questions about Gnome in Mandrake 7.1. I know
the Helix Gnome improvements have been included, but I don't see the
helix-update program.
Anyone know where this program is in Mandrake 7.1? Also, are there any
other automated solutions to grab updated packages and install th
Hi Leonardo
I have two 3c509's and had init problems with both of them
on totally different hardware, so it's not an isolated problem.
Luckily the solution is simple, as root edit your /etc/rc.d/rc.sysinit file.
Goto the line just above the Section for "loading modules for backward
compatibility
hi all !
when booting lilo i am getting :
li 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
04 04 04
04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
04 04 04
04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04
04 04
91 matches
Mail list logo
