/upgrade with RAID arrays
(most importantly one on /)? I even used the patch for 9.0 and RAID on /, hoping that
might do the trick, but nothing.
I've been using 9.1 on another machine, and it's pretty good. I don't know why it just
doesn't want to install on this machine.
Thanks,
gikoreno
looking everywhere on the net for this, but I only saw people
having the same question, and no answers.
I am sure that there are lots of people who would be interested in knowing how to do
that too.
Thanks in advance,
gikoreno
___
Join Excite! - http
solution may be more elegant
though.
Hope this helps,
gikoreno
--- On Fri 03/21, Arnold Troeger [EMAIL PROTECTED] wrote:
From: Arnold Troeger [mailto: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Fri, 21 Mar 2003 17:35:49 +0700
Subject: [expert] Where are libacl.so.1 and libattr.so.1?
I've just
like this:
hda+hdb in RAID1 = md0
hdc+hdd in RAID1 = md1
md0+md1 in RAID0 = md3 == /var
Which one is better, and why (latency, throughput, etc)?
Thanks a lot in advance
gikoreno
___
Join Excite! - http://www.excite.com
The most personalized
the RAID Howto, and it's in Appendix C, but I am wondering if there
isn't another way of doing so that I can use while installing Mandrake.
Thanks,
gikoreno
___
Join Excite! - http://www.excite.com
The most personalized portal on the Web
for any advice on the matter,
gikoreno
___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
easily fill a
10 gig hard drive streaming a video to your hard disk, but I could be wrong.
I will need about 10 minutes of video... Available are 12GB on a RAID 0 and 10GB on a
RAID 5. Hopefully it will be enough.
gikoreno
___
font size=2 face
of course)... The editing of the video is less of an issue right now. Once done
editing, I want to be able to play it back for the VHS tape recorder to record it.
Thank you very much in advance, and I appreciate any help you could give me.
gikoreno
Dear all,After having had an extremely stable system for a while now (MDK 9.0), I stupidly played around with the BIOS' power management features, and the system locked. So I had to hard reboot, and changed them back to what they were, thinking all would be fine...They system locked up again,
Hey David,
So you know if your patch was incorporated as an update for MandrakeUpdate?
If it wasn't it'd be nice if it did.
gikoreno
> You get the same "-1" by using webmin to create a userid. I
> posted a
> python patch for this several months ago.
>
>
partitions XFS, msec level 5,
kernel-secure-2.4.18.8, or the normal kernel 2.4.18, etc... that has quota running the way expected (as a user)?
Thanks
gikoreno
--- On Mon 07/29, Bryan Whitehead < [EMAIL PROTECTED] > wrote:
From: Bryan Whitehead [mailto: [EMAIL PROTECTED]]
To: [EMAIL PR
links:
http://marc.theaimsgroup.com/?l=linux-xfs=101697728801467=2
http://marc.theaimsgroup.com/?l=linux-xfs=101701227031491=2
http://marc.theaimsgroup.com/?l=linux-xfs=101701969005112=2
http://marc.theaimsgroup.com/?l=linux-xfs=101902864819725=2
Do you think they might have anything to do wi
Thanks Todd,
I'll keep that in mind (hadn't thought about it).
gikoreno
--- On Sun 07/28, Todd Lyons < [EMAIL PROTECTED] > wrote:
From: Todd Lyons [mailto: [EMAIL PROTECTED]]
To: [EMAIL PROTECTED]
Date: Sat, 27 Jul 2002 23:33:29 -0700
Subject: Re: [expert] how to acknowledge c
on an XFS filesystem).
Thanks in advance for the reply,
gikoreno
Join Excite! - http://www.excite.comThe most personalized portal on the Web!
if this is already fixed in MDK 8.2 (in which case I am experiencing something different), but from what those links say, it's exactly the same symptoms...
gikoreno
--- On Sun 07/28, Larry Sword < [EMAIL PROTECTED] > wrote:
From: Larry Sword [mailto: [EMAIL PROTECTED]]
To: [EMAIL PRO
g correct, I'd like to be able to acknowledge them, and not get them again (if there is a change a second time, I will know, else I might just ignore cause I thought it was my initial change).
How do I do that?
Thanks in advance:
gikoreno
Join Excite! - http://www.excite.comThe most personalized portal on the Web!
the docs), but they all seem to imply that it should be possible to run the quota command as a user and get the proper result. An edquota is supposed to work every time...
My third and last question is that I would like the quota info to be displayed for each user when they log on through ssh. How
SGI's site (and in the docs), but they all seem to imply that it should be possible to run the quota command as a user and get the proper result.
My second and last question is that I would like the quota info to be displayed for each user when they log on through ssh. How do I make that happen?
stop the dhcpd server altogether from running on that interface. Let me know if this is the case, as it'd be interesting to know.
Cheers,
gikoreno
--- On Sun 07/21, Jason Guidry < [EMAIL PROTECTED] > wrote:
From: Jason Guidry [mailto: [EMAIL PROTECTED]]
To: [EMAIL PROTECTED]
Date: Sun,
Hey,
I found this article very useful:
http://www.mandrakesecure.net/en/docs/msec.php
So the command would have to be executed as root:
msec -o log=stderr
So to change to level 3 you would type
msec -o log=stderr 3
I hope that helps.
gikoreno
--- On Thu 05/02, David Rankin
ting from localhost). I looked at the logs during the change.
Please help! Thank you in advance!
gikoreno
--- On Thu 03/28, Rob Gillen <[EMAIL PROTECTED]> wrote:
> If you aren't sure which kernel you are using, trying running 'uname
> -r' on the command line. You are using the secure kernel if it turns up
> 2.4.18-6mdk-secure. If msec doesn't change it, then it may have been an
>
ever HAD to reboot).
That's why I was thinking it may be something with permissions of whether a program can or cannot use certain hardware (/dev/sg0 in this case).
I have no clue...
Is there any very detailed document explaining what changes happen when switching security levels in msec?
Hi everyone,
I just checked the newbie and expert lists, and couldn't find anything that answered this question...
I just installed Mandrake 8.2, but kept my previous Mdk 8.1 /home partition. I used to have xsane working, and I ran scannerdrake and I can't seem to get the scanner working
a normal partition rather than a RAID?)
3.- Should I make /tmp RAID 0 too? I left it like that to keep some sort of symmetry on both drives, but maybe it's not needed, and I could rearrange and make it a RAID0 too?
Ok, thank you very much in advance for your advice.
gikoreno
Want to
--- On Fri 03/08, <[EMAIL PROTECTED]> wrote:
> On Fri, 8 Mar 2002, gikoreno wrote:
>
> >
> > DISK 2:
> > SWAP 128MB
> > /usr 5GB RAID0 XFS 2nd
> > /usr/local 5GB RAID0 XFS 2nd
> > SWAP 128MB
> > /var 5GB RAID0 XFS 2nd
> >
Excellent.
Thanks again!
--- On Sun 02/17, Hoyt <[EMAIL PROTECTED]> wrote:
> On Sunday 17 February 2002 11:53 am, you wrote:
>
> >
> > If I wanted/need Win2K, or another version of Linux/BSD, to run in a
> > window, then the full vmWare is the only way to go. Quite noticeable
> >
Hello everyone,
I was wondering if anyone has managed to install Win4Lin AND VMware on the same Kernel (the updated Mandrake 8.1 kernel), success or not, what things break, things that I need to be carefull about, and any info that I could get from someone who went through it.
Thanks for
There is Ximian Gnome for Mandrake 8.1, and it comes with Mozilla 0.9.7 . It's an overkill just to get mozilla, but it also updates other software.
I don't know if that helps.
--- On Feb 1, 2002, =?iso-8859-1?q?Steve=20Kieu?= <[EMAIL PROTECTED]> wrote:
>
> Hi
>
> I am looking for
Hi all,
I am running Mandrake SNF on a Pentium (I) with 16MB of RAM.
I believe I have 8MB of RAM free while no client computer is connected.
The FW/NAT is connected to my cable company on one hand, and to 3 client
computers on my home network on the other.
Recently I realized I am getting
Hello everyone:
I was wondering if anyone had found a workaround to enable the RAID 0 on the
Abit KT7A-RAID motherboard. I'm running MDK 7.2 .
Thanks in advance,
Gikoreno
___
Send a cool gift with your E-Card
http://www.bluemountain.com
through the same problem? Does anyone have a solution?
Gikoreno
___
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
32 matches
Mail list logo
