Dave,
I think that you might have missed the point, with VAC, PowerSDR will
deliver the audio to and from the radio directly to the Skype
program... So set the output of PowerSDR to Virtual 2 => Skype
input, Virtual 2, then the input of PowerSDR, Virtual 1, => Skype
output, Virtual 1.
Tim,
thank you for your continued support ,,you truely are the back bone
of this forum,
I'm going to rip the motherboard and cpu P4 ,3gig out of this pc and replace
ithave you any prefference when it comes to motherboards regarding BUS
speeds L2 cache etc etc or is anything new
Under settings-display-refresh rate is a new feature called "Fill Panadapter".
Instead of single line on the panadapter it now will fill everything below the
line with the same color.
Fun to play around with. Sort of like the Icom displays on the 756 series.
Date: Sun, 19 Apr 2009 18:01:08
At 18:15 4/20/2009, Tim Ellison wrote:
This KB article describes how VAC works with PowerSDR
http://kc.flex-radio.com/KnowledgebaseArticle50060.aspx
Reading this helps some, but why would I WANT to run a "sound card
digital mode program "?? What would it do for me???
--
Dave Gomberg, San
Have your tried the Firewire optimizations listed in the Knowledge Base?
http://kc.flex-radio.com/KnowledgebaseArticle50013.aspx
It may not be buffer settings. It may be very long duration DPCs that are
causing the problems. These can be checked with DPCLAT
http://kc.flex-radio.com/Knowledgebas
This KB article describes how VAC works with PowerSDR
http://kc.flex-radio.com/KnowledgebaseArticle50060.aspx
It sounds like you have the sound card incorrectly configured with Skype. It
needs to be a VAC cable.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto
Well I just fixed my own problem by plugging in something into the mic in
jack on the computer. Now I can connect via Skype. Does the VAC supply
audio from the flex to skype or do I still have to do
that via a cable from the audio of the skype to the mic input of the
computer. Because without the
I have had my Flex SDR working with skype with no problems. I just installed
VNC so I could finish up my remote setup and now when I try to connect via
skype it tells me user can only recieve IMS. But if I
Close out the Flex SDR program it will then let skype connect. Any
suggestions???
N4zvn>Ed
__
The area below the noise threshold on the panadapter is filled.
Tim Ellison wrote:
Me thinks it is the Histogram display
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Don Sachnoff
Sent: Sunday, April 19, 2009 7:
I have been trying to get my Imac to work with the SDR 1000, it sort
of works but has audio drop out frequently.
I'm using XP SP2 with the Firewire Hot Fix for the SP2 Pack.
In a word the performance sucks !
I have changed the band width the buffers etc.
Any help would be appreciated.
73
Dan
K8I
Dave,
RX2 can only connect to ANT1 directly unless you are using the RX1 Tap on
the antenna selection.
Gerald
Gerald Youngblood, K5SDR
President
FlexRadio Systems
13091 Pond Springs Rd. #250
Austin, TX 78729
Phone: 512-535-4713
www.flex-radio.com
"Tune in excitement!" (TM)
-Original Mess
What property of the Space Navigator enables it to retain its focus on PSDR???
Could this property be transferred to PSDR enabling other commercially
available and home-brewed input devices to work in the same way.
Keep it simple guystechnically challenged here!!
TIA
David - G4PNX
___
To all,
The fix for CAT not being able to assert PTT (TX), which broke the usability of
a lot of digi mode programs, has been posted to the SVN trunk. This code is
more stable than the SVN test which does contain alpha code.
For those needing this fix, it is recommended that you use the SVN tr
See the Setup Form -> Display Tab on the latest version and try it out.
Eric Wachsmann
FlexRadio Systems
On Sun, Apr 19, 2009 at 6:01 PM, Don Sachnoff wrote:
> What is "fill panadaptor"?
>
> Don - kx9q
>
___
FlexRadio Systems Mailing List
FlexRadio@f
SVN has lots of different sections. Which one are you using. The SVN number
is not associated with a particular section, like the trunk or /branches/test
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Steven Green
I just downloaded the latest SVN Version and imported my 1.16.2
database into it and It will not go into transmit from mixw. I use
my 1.16.2 and all is ok. If I am missing something please let me know.
___
FlexRadio Systems Mailing List
FlexRad
Yes, but that method described below is flawed and does not accurately tell you
what the "actual" speed that the host controller and the Firewire device are
communicating. It just tells you what Windows "thinks" it should be. A lot of
this is dependent on the ohci1394.sys driver.
For determin
yes ok fair comment Tim,,,
same windows install on both pc's that i tried,,
appreciate your help,,,(shopping tomorrow for fresh windows)
i did find something somewhere in microsoft that tells you what speed the
card is doing but my brain is in overload at the mo,,,
http://www.microsoft.com/c
You are sailing in uncharted waters with sea monsters using Win7. I think that
my be the root cause of all the strange behavior you are experiencing.
-Tim
From: Larry da Ponte [mailto:n7bcp.la...@gmail.com]
Sent: Monday, April 20, 2009 2:35 AM
To: Tim Ellison
See my comments in-line below
-Tim
-Original Message-
From: Paul Radge [mailto:pra...@tpg.com.au]
Sent: Sunday, April 19, 2009 11:58 PM
To: Tim Ellison; Flex Radio
Subject: [SPAM] Re: [SPAM] [Flexradio] sdr1000 + wsjt + edirol fa-66,,,your set
up please ?
Hi Tim,
looking f
20 matches
Mail list logo
