You need to "Save" your transmit profile after you set you desired power
setting.. The output power is retained in each Transmit profile..
73,
Dudley
WA5QPZ
k...@vhfdx.com wrote:
Speaking of power, I was playing around with transmit profiles tonight
and every time I change to a different pro
Speaking of power, I was playing around with transmit profiles tonight and
every time I change to a different profile the transmit power resets to
50%. Is PWRSDR supposed to do this? Can it be overridden? V1.18.0
At 12:02 PM 6/1/2009 -0500, you wrote:
Art
I'm not sure why yours is doing tha
One could certainly do it, but is it not the start of the path to
madness? Imagine if you needed a dongle for PSK31, one for RTTY,
one for WSJT etc.
Personally I'd rather to see the SDR community advance the Free (as
in freedom) state of the art than support solutions that are
implemented i
Marty,
I believe the XVTR option for the Flex-3000 is all external, so getting a
DownEast Microwave unit, with the 10 MHz reference option ("A 32" board)
should keep you without drift. I know some folks locally using that (with a
traditional IF) on 10 GHz and no drift...
73,
Ed
WB0VHF
At 09
But it doesn't preclude the use of D-STAR. (and there is D-STAR data without
voice)
There's a number of efforts where the AMBE chip (a lot of state-of-art
technology crammed into a little chip) is being used to decode and encode
D-STAR signals in a manner completely consistent with the open sour
See my comments in-line below
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of N4PY2
Sent: Monday, June 01, 2009 8:06 PM
To: flexradio@flex-radio.biz
Subject: [SPAM] [Flexradio] Just received my Flex 5000A
I just re
OK, so proprietary was the wrong description. The original specification is in
the public domain, developed by JARL as you noted. It specifies the AMBE 2020
codec. Apparently only one company has seen fit (or gone through the trouble)
to develop a CODEC to fit the standard. The codec is *not
I just received my F5K today. It arrived in fine shape and I have it all
setup. I noticed a couple of things that surprised me. One in particular
is I have a PC audio amp plugged into the pwr-spkr jack. This is working
fine for speaker audio. But, when I plug headphones into the headphone
Correction - D-STAR is NOT Proprietary. It is an open standard developed by the
JARL.
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Monday, June 01, 2009 11:08 AM
To: Jim Madden; flexradio@flex-radio.bi
Dave,
I assume that you've already tried adjusting the AGC-T control, narrowing
the filter, using the other DSP options like the Noise Reduction (NR) and
the Noise Blankers (NB and NB2). The preamp should be in the Pre setting
(as opposed to Off or Attn) for weak signal work.
Eric Wachsmann
Fle
Simon,
If you're using CAT, you may want to have a look at the CAT Dictionary that
K5KDN has put together. I think he keeps the latest copy on SVN, but he
could probably send you one directly if you asked nice.
Eric Wachsmann
FlexRadio Systems
On Sun, May 31, 2009 at 11:36 AM, Simon (HB9DRV)
Ed,
There is no internal command the PW-1 understands to turn it on/off I'm
aware of. I think you would have to use another piece of software and relays
and or something made to switch power on/off. I know some of the guys
running remote stations are doing this, but I can't advise what.
73,
Steve
I see that DDUtil says it has the ability to change the bands on the ICOM
PW-1 amplifier as the 5000 changes bands. But is there a way to turn the
amplifier on and off remotely? Any suggestions..
N4zvn>Ed
___
FlexRadio Systems Mailing List
FlexRadio@flex
At this time, all people who ordered Flex 3000 and 5000 full color high
resolution operating manuals at Dayton should have been them delivered to
you by USPS. If for some reason you believed you ordered a manual and
haven't received it, please drop me an e-mail, or visit my web site.
Please include
Mark et al.,
If you are running DDUtil 1.7.2 or later and have the Auto Drive feature
enabled and haven't set any barefoot power settings then it's probably
DDUtil setting the power to its default setting of 100 watts. You can
disable this feature on the Amps tab. To see a discussion of this featu
Interesting?
I just noticed that mine is also defaulting to max power when I click
through the bands and registers within a band?
Mine never did that before. Another interesting point is that I have not
updated my PowerSDR software in a few months. I wonder if DXLabs or DDUtil
is sending the comma
AWG Packet engine
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ted
Sent: Monday, June 01, 2009 12:56 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] vhf/uhf digital modes and repeater operation
What is "
Thanks,
That is how mine used to operate. Can't figure out what got changed. Perhaps my
database is corected, will try a new one.
73,, Art
From: FireBrick
To: w8...@yahoo.com; flexradio@flex-radio.biz
Sent: Monday, June 1, 2009 1:02:33 PM
Subject: Re: [Flexr
Art
I'm not sure why yours is doing that.
I have a different drive for almost every band.
I set them so that I max at exactly a KW when using the amp.
I can click through the progression of buttons on Band-HF and watch the
drive change with each selection.
And unless I change the drive level
Hi Les
I have setup HRD/DM780 perfect running here for my SDR1000 systems.
Think there is no BIG difference to the F3000 which I orderd Oct. 2008
and am still waiting
for. So if I can be of any help, call.
73 Chris HB9BDM
___
FlexRadio Systems
What is "AWG software" ?
Ted
NX6C
From: Tim Ellison
To: Jim Madden ; "flexradio@flex-radio.biz"
Sent: Monday, June 1, 2009 8:07:51 AM
Subject: Re: [Flexradio] vhf/uhf digital modes and repeater operation
Yes, it will have tone support in an upcoming version o
Bob,
It is a Dell Inspiron 530 with a Q8200 processor with quad core
technology runing Windows XP Pro SP3. It has 4GB of ram. AMD Radeon
HD3450 PCI-Express video card. It has a separate 1394a plug in firewire
card but I do not know the manufacturer or chipset. I am running 2
monitors. The computer
Art,
I can't answer your question, but you can control the power on each band
using DDUtil. Go into settings and check the bands you want to set the
power then go into Amps and set the power by band. Use the PTT button to
change power settings. This is how I am running pretty betty and
controlli
Marty
I *think* JT65B in WSJT software is limited by the filter width, which is a
maximum of 600 Hz either side of the center frequency. I am looking at it
right now, and that's what it looks like to me. Maybe a question for the
WSJT yahoo group?
Mark Lunday
WD4ELG
wd4...@arrl.net
http://wd4el
Pwr out always defaults back to 100 when changing bands. vs 1.16.2, 1.18.0, and
pretty betty. What do I have set incorrectly ?
Thanks,
Art K8JK
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/li
Yes, it will have tone support in an upcoming version of the software.
D-Start is proprietary.
You should be able to interface a TNC to the radio. I suspect that you can do
it virtually too, but the AWG software will have to change to support separate
sound card instances for TX and RX.
-T
The FLEX-5000 Service Manual is only available for free to original purchasers
of the FLEX-5000. It can be purchased from the FlexRadio On Line Store. The
FLEX-3000 Service Manual has not been released yet.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexr
Hi All,
I'm thinking about getting a 2 meter transverter to hook up with my
Flex-3000. I've read reports of some models of transverters drifting too much
during transmit for use in EME. Any suggestions/recommendations about which
transverters are suitable for SDR EME work?
One more quic
I'd like to know if the forthcoming vhf/uhf add-on for the 5000 will support
repeater operation and if so, how will pl tones be implemented.
Also, are there thoughts about using the new add-on with the digital modes
such as D-star, APRS, etc.
Thanks very much
Jim
KD7GND
_
For those weak signal DXers out there, what AGC settings are you finding
effective for the high dynamic gain requirements encountered on 6M? Does
it change with the NB on? Just starting to use my 5000 and also starting
to get the first 6M openings of the year and I have found that the NB
appe
NZ8J wrote:
I've had the Flex for almost 30 days now and have really enjoyed it for
the most part. For one thing, as a cw only operator I am not fond of
the loud mechanical T/R relay used in the 5K. After a lot of searching I
was able to find a set of headphones (thanks to John N3WT) that keeps
Hi,
I'm a new member of the reflector. I' thinking to purchase a 3K or 5K, Could
some one can send me a schematic diagram even service manual?
I want to study it and decide purchase which one.
73!Hsu
___
FlexRadio Systems Mailing Lis
Tim
You're a goner
73 W9OY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: ht
try deleting the database and reinitialize the radio. There is a button in the
first screen of the setup form down at the bottom that will do this
automatically
It sounds to me like a relay is not switched to where it should be, even though
it works on the dummy load
73 W9OY
_
John,
That is one of those inscrutable error messages provided by Microsoft & is
designed to provide absolutely the least useful information possible.
When you click on the error message window, which program closes, VoiceKeyer
or PowerSDR?
73, Ray, K9DUR
-Original Message-
From: flexra
After my first successful run with VoiceKeyer it has gone on the blink
with an error splash screen. "An unconditional exception has occured in your
application." Boy is this getting tuff.
Any help would be much appreciated, have made many changes in buffer settings
with no joy at a loss now.
> Probably an old portable
>AM radio would work as well finding those 8 or 15kHz multi-
>harmonic signals.
If you haven't got an old AM radio get yourself one of these
http://www.winradio.com/home/erd.htm
I've had one for years, its easy to use and excellent for tracking down rfi
problems. Anyon
I am still experimenting TX without success on my flex3000, scratching
my head !, please help !.
Some more informations :
- my pb is (probably) not related to the ATU (which is in the bypass
mode so not sollicited for the tests)
Flex3000, Powersdr 1.18.0, 96k 1024, nothing connected to
38 matches
Mail list logo