I have just bought a new computer and it is loaded with 64 bit Vista. I
figured out the work around for VAC using F8. It would be nice if there was
a signed driver version, but at least I have PowerSDR running now. IS there
another SIGNED driver alternative solution to VAC?
Scott AC8DE
The following is with both receiver 1 and receiver 2 tuned to 1.590 Mhz - a
strong broadcast signal
It seems to me that the antenna module is not properly switching or that
things aren't connected properly inside the radio .
I'm waiting on the tool to allow me to unscrew the cover to
Not that I am aware of and I have been looking for a while now.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Scott Myers
Sent: Saturday, September 19, 2009 9:25 AM
To: FlexRadio@flex-radio.biz
Subject:
I'm waiting on the tool to allow me to unscrew the cover to look but in the
meantime I thought I'd ask the group if there are any thoughts about this.
I use a small screw driver as opposed to the Torx driver.
Make sure the ribbon cable is attached to the HRFIO board and the mini coax
After working with Neal Campbell I was finally able to get VSPD lite (from
him) working and I've found that it has resolved the issue experienced with
Com0COM that caused Ham Radio Deluxe to crash after a few minutes. Thank you
Neal! VSPD lite is available from Neal at a substantial reduction in
Funny. I have been using a mouse wheel for since 2005 to control the frequency
in PowerSDR and it has worked perfectly with the half a dozen or so mice I have
used.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Is it necessary to re-run the receiver calibration tests when upgrading
a 5000 from 1.3.0.6 to 1.3.08?
Thanks
Stu K6TU
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Changing firmware rarely has anything at all to do with the calibration of the
radio. That is usually PowerSDR dependent. And if a calibration is necessary,
you will be prompted to do so from PowerSDR.
If you are not upgrading your version of PowerSDR and just upgrading the
firmware, then no
Hello,
Just curious about the Flexwire audio in specs, is it line leven instead
of mic level? Does it bypass the mic preamp?
Jesse
73
N4BFD
http://www.qrz.com/db/N4BFD
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Line level and it does not use the mic preamp.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jesse N4BFD
Sent: Saturday, September 19, 2009 4:46 PM
Cc: flexradio@flex-radio.biz
Subject: [Flexradio] Flexwire audio in
Since I like to buy locally in Canada I was thinking of getting one of
the following cards for my Mobo Asus M2A74-AM. The board has no PCI-E
slot. They don't list what chipset they use, but it may be TI.
Tiger Direct Canada
1. StarTech PCI1394_4 4-Port FireWire PCI Card with Digital Video
Check out the SIIG, here:
http://siig.com/ViewProduct.aspx?pn=NN-440012-S8
TI chipset.
73
Wayne
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
I use his item #2 in my computer builds, its the TI chip also. It also
includes a low-profile bracket if you are using that type of case.
Newegg sells them for 21.95 I believe.
73
Neal Campbell
Abroham Neal Software
www.dxbase.com
www.abrohamnealsoftware.com
www.sdrsystems.com
(540) 242 0911
FWIW I also use this card from SIIG and it works flawlessly.
Paul Delaney
K6HR
- Original Message -
From: k4...@fastmail.fm
To: Flex flexradio@flex-radio.biz
Sent: Saturday, September 19, 2009 7:11 PM
Subject: Re: [Flexradio] Which Firewire card to buy..
Check out the SIIG, here:
Scott,
Do not know of another option.. You can keep Vista 64 in Test Mode and you do
not need to use the F8 key at boot up.. He tells you in the VAC Help files..
That is the way I run mine.
73,
Dudley
WA5QPZ
Scott Myers ac...@ameritech.net wrote:
I have just bought a new
15 matches
Mail list logo