i've got a complex antenna setup including a device used to switch one
linear amplifier among 2 antennas.
the antenna setup is not suitable to my needs.
simple setup is too simple, expert setup is almost ok, but lack the ability
to use 2 different setup for the same band.
in my opinion the best
V1.18.3 is the latest version of PowerSDR for all FlexRadio SDRs. All of the
current software and documentation is on the FlexRadio home page.
http://www.flex-radio.com/
To see the specific for a release and the software/firmware required, see the
following KB article
vCom is only 32-bit. It will not work with x64 Windows operating systems.
I have tried the serial port software below and I know the Eltima stuff works
-Tim
-Original Message-
From: Scott Myers [mailto:ac...@ameritech.net]
Sent: Sunday, September 20, 2009 9:51 PM
To:
Try a database reset.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dan Eisenman
Sent: Sunday, September 20, 2009 11:26 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] 5000A -FWD wattmeter is not functioning
Of course it is feasible, it is a software defined radio :-)
Add this feature request to the Enhancements database for future consideration.
Remember, you have to be logged in to the support site to add to the
Enhancements database. http://support.flex-radio.com/BugList.aspx?it=f
-Tim
Thanks Tim,
Yes, I have now tried the Eltima package in trial mode and it works. I seem
to have everything functioning, but now I have other issues that I will put
up in another post. It's so easy. Hi hi It is really not that bad, just a
few snags with the new 64 bit OS.
Scott AC8DE
My ham shack consists of a Flex-3000, a Tokyo Hy-Power HL-1.2Kfx
Amplifier, Palstar AT-Auto tuner, G5RV dipole, Heil Pro-Set IC Headset
(using recommended cabling), and a Dell PC running XP. I am using
PowerSDR 1.18.2.
The vast majority of the time, everything works great, including my use
You might look at the power overdrive protection in DDUtil.
73
Neal Campbell
Abroham Neal Software
www.dxbase.com
www.abrohamnealsoftware.com
www.sdrsystems.com
(540) 242 0911
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to ca...@dxbase.fogbugz.com
Gary, I use a THP 1.5KFx with a F3K and went thru my share of
teething troubles. It turned out that my mic (from a nice Yamaha
headset) was overdriving the F3K, I reduced my mic gain to 0 and
adding an attenuating resistor in series with the mic.
I have never fiddled with the ALC settings, I
I had the identical problem on my 5000A. Flex has it for the second time now.
Tried exactly the same things u did to fix it, with the same results.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
On Mon, Sep 21, 2009 at 9:07 AM, Gary Robertson
groberts...@austin.rr.com wrote:
Any suggestions?? Has anyone using a Tokyo Hy-Power amplifier had success
with other drive, Mic Gain, or ALC settings? Should I change some other
settings on my Flex-3000? Thanks beforehand for your help and
My wattmeter has been showing a zero output for weeks now too. V. 18.1,
Windows XP, fire wire.
I renamed the old database and let it rebuild a new one, but it still shows
zero.
N8KJG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
You radio should come with the latest firmware already loaded.
The current Firewire driver is v3.4.2.6300
http://support.flex-radio.com/Downloads.aspx?id=292
The current Firmware for the FLEX-5000 is 1.3.0.8
http://support.flex-radio.com/Downloads.aspx?id=287
The current version of PowerSDR is
Hello:
I am running the FLEX 5000C. Using the dummy load tonight while we are
having thunderstorms. A good time to do a little tweaking.
Can someone give me some good setting for the following:
EQ, Leveler, Lev Gain, ALC, and ALC Comp
When I set the mic to close to 0 and I look
Hi Joe
The mixer menu is where you can change the mic settings. The various tabs of
the setup menu have the rest, its fun to go poking thru them and see whats
there!
73
Neal Campbell
Abroham Neal Software
www.dxbase.com
www.abrohamnealsoftware.com
www.sdrsystems.com
(540) 242 0911
Amateur
Help, Flexers:
With my Flex 5K with current firmware, driver and SDR:
When I transmit on CW I hear a drop-out on the CW sidetone approximately
every two seconds.
The length of the drop-out is about the length of a dit at 25 WPM. At
slower speeds, it sounds like a crackle in the audio but
Joe,
We can provide some starting points, but you are really going to have to listen
to the monitor or better yet your own signal in a separate receiver (with a
wide filter) for achieving audio that sounds like yourself.
1. Rule #1 - Set the TX Meter to MIC and NEVER allow any setting you make
Neal,
Yes, it is fun to poke around and I have done so. I still do not see the
setting area for the one's I mention in the email. I am sure they are their
but I seem to be overlooking them.
Of course, it does not help that I am legally blind. I do have a 40
monitor which helps some.
18 matches
Mail list logo
