and at the other end of the spectrum, k8zoa has gone the extra mile..
http://www.cliftonlaboratories.com/z1203_dc_power_coupler.htm
for those of us who go the 'other way'..some good ideas, even if you dont
buy it..
73, w5xz, listening to the noise on 160m
--- On Tue, 5/18/10, Tim Ellison
Interesting reading
http://www.ece.vt.edu/swe/lwa/memo/lwa0135.pdf
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bret Mills
Sent: Monday, May 17, 2010 11:19 PM
To: k...@verizon.net; 'Peter Scheller'; 'flexra...@fl
Look here for idea's on a power inserter,
http://www.hamuniverse.com/wx9dxmfj4712.html
Even simpler and less expensive you can find a old UHF TV mast mount
amplifier which come with a power inserter with 75 ohm connector, just
dissemble it and install a BNC in place of the F connector and RG58 pi
Steve,
Try with your antenna on RX1 In, make sure that you change the Antenna
menu to RX1 Input, if the signals are ok there, you will need to send
in to Flex for repair. Let me know directly at supp...@flex-radio.com
if the results, but if the receiver comes back to life.
73,
Dudle
Sunday afternoons @ 1800 UTC on 14.329 is one time and place.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of racer
Sent: Monday, May 17, 2010 9:44 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Flexers on the
Tim responded
No this is not a feature of the vu5k and the board is feature complete.
-Tim
Sent from my iPhone
On May 16, 2010, at 4:18 PM, "Peter
Scheller"mailto:nh...@msn.com>> wrote:
Tim et al,
Is the Flex 5K with V/U modules installed capable of supplying 12VDC
to antenna mounte
Are there spots on the HF band where the flex users hang out?
I have a 5000A on my wish list and would like to gather as much information as
I can.
Thanks
Marv
N0FJP
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/m
I have been using DDUtil to control a THP HL-1.5KFX Amp. I have had the amp
in the Kenwood mode and I'm using the DDUtil Passive listener mode and a
RS232 cable. All has been working well. DDUtil controls the band switching
on the amp with no problem.
Now I will be adding a Palstar AT-Auto tun
My flex 5k was operating fine this weekend. Today it seem to be deaf.
I have swapped antennas and coax. The icom hears just fine on all the
antennas and coax.
Both the main RX and RX2 can't hear outside signals. They can hear the icom
transmitter without an antenna and with the flex on a dummy load
Real open mind
--- On Mon, 5/17/10, Richard W. Solomon wrote:
> There was a Saturday Morning Network
> show wherein one of the
> guests talked about the dangers and pitfalls of Facebook.
>
> It was enough to keep me from trying it
>
> 73, Dick, W1KSZ
>
>
> -Original Message-
> >Fr
Hunter,
Welcome to the group and to the Flex Club.. Lots to learn and new way
of operating a radio, more neat things coming in PowerSDR 2.0
73,
Dudley
WA5QPZ
Hunter Ellington wrote:
Well, as an OF who has genetic deficiencies when it comes to all things
computers, the FLEX-5000A has b
HI HI
-Tim
Sent from my iPhone
On May 17, 2010, at 7:22 PM, "adam grossmyer" wrote:
> Well just having the flex 3000 for a few days I have discovered a
> huge FATAL
> FLAW!!! And I think it needs to be addressed immediately. I now
> notice
> every time I operate this radio how v
Well just having the flex 3000 for a few days I have discovered a huge FATAL
FLAW!!! And I think it needs to be addressed immediately. I now notice
every time I operate this radio how very awful other people are and how
badly they splatter there signals all over the bands HI HI. It's
definitel
Well, as an OF who has genetic deficiencies when it comes to all things
computers, the FLEX-5000A has been a revelation. Once I figured (stumbled) out
how to make it work with my computer, I was, and continue to be amazed with
this radio. I am doubly blessed in that my XYL allowed me to have b
To add to Steve's great comments, make sure you forward 1 port through
your firewall for Skype audio. Then, tell Skype which port that is.
(no, that won't make you a supernode)... Do that at both ends.
Doing that will really reduce your latency to just a normal internet
traffic level.
You
Hi all,
?Iam sorry for using the wrong word (AFFEND) should be 'attend",my sight is not
the best at 80 years old hi hi .
Jack
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio
I'm pretty sure there is a way to make the pix available without becoming a
Facebook member, just never have done it. Perhaps Bob will have a little time
now that Dayton is over (grin…) to see how that is done, and if I find
something to that effect I will pass on.
Facebook is like most anythi
?
Hi ALL,
?the majority of flexers replying,refused to join facebook just to view a very
important video taken at Dayton.
And so do I,is this the only video taken?could there be someone else that can
show video of?their? own taking so we can all enjoy it ?We who did not affend
are waiting with b
Glad you got it working Juan.
Dave
wo2x
--
From: "K4LCD"
Sent: Monday, May 17, 2010 4:42 PM
To:
Subject: Re: [Flexradio] The good news is... Here, everything works!
Hi!
Everything works connected to my Flex 5000A! And I run all these programs
I was operating remote on the Flex net yesterday. I had the same issues if
monitoring a frequency with no activity. A quick TX then RX restored the
receive audio to normal level. I think it may have to do with the auto
leveling of the receive audio in Skype.
Dave
wo2x
--
Here here Tim! And could someone be so kind as to shoot a free V/U
module my way? :-) HI HI!
Michael, W4HIJ
On 5/17/2010 4:45 PM, Tim Ellison wrote:
"What more could this old ham want?"
I'd like some sunspots and high solar flux numbers.
-Tim
-Original Message-
From: flexradio-boun
So cool
Congrats Brian.
On 05/17/2010 07:04 AM, Bob McGwier wrote:
> http://www.facebook.com/album.php?aid=179399&id=827451648&saved#!/photo.php?pid=4257177&id=827451648&fbid=411342171648
>
--
Regards de KC6KGE
Skype flamebait
Monitoring at least one of the following Frequencies if the radio
"What more could this old ham want?"
I'd like some sunspots and high solar flux numbers.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of K4LCD
Sent: Monday, May 17, 2010 4:43 PM
To: flexradio@flex-radio.biz
Subject
Hi!
Everything works connected to my Flex 5000A! And I run all these
programs at the same time.
Using my new Quatro computer with the Windows 7 OS,
With VAC 4.09 Virtual Cables 1 and 2
VSPManager and only three pair of Virtual Serial Ports Activated; the
following programs run perfectly, si
You know, I actually thought about cutting and pasting it into a text
file at one time when it was going on but then I decided it wasn't worth
it to do that anymore than it was worth it for me to keep arguing with
the ignorant misinformed people.
I just let it go and then I came over here an
I feel the same way; would like to see pix but not about to join Facebook.
Pierce W4ZDI
- Original Messge -
From:
To:
Sent: Monday, May 17, 2010 11:28 AM
Subject: [Flexradio] pictures from the dinner
I got a e mail that said I could see the pictures of the flex dinner on
sat. W
io.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
__ Information from ESET NOD32 Antivirus, version of virus
signature
/www.flex-radio.com/
__ Information from ESET NOD32 Antivirus, version of virus
signature database 5122 (20100517) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__ Information from ESET NOD32 Antivirus, version of virus signature
database 5
Agreed. And that's fine if you are the person sharing. But if you are a
person, like many, who do not wish to share - but would
like to view the publicly available content from others who choose only to
publish on Facebook - then the article below shows you
how to become a member of Facebook w
Rob,
I really do not have another option to recommend for robust audio
transport with a decent codec other than Skype.
There is the free TeamViewer remote desktop software package that also has an
audio VOIP connection feature, however I have not tried this out yet. This may
work very well for
The idea behind Facebook is to publish information that you would not mind
others seeing. If one does not want private information seen then I would
not put it on Facebook.
It's all about making sure that the first thing you do is modify the
default privacy settings.
Here is a great article
Hello Steve,
That is correct, I am using Skype for the audio. I will have a look at the
settings for the fix level setting and see if this helps. Is there another
program that will work instead of Skype?
Thank you for this information.
Ken
K3YI
- Original Message -
From: Steve Fl
It's all about making sure that the first thing you do is modify the default
privacy settings.
Here is a great article explaining more about the pitfalls and how to deal with
it.
http://lifehacker.com/5538697/how-to-quit-facebook-without-actually-quitting-facebook
You can also look through sev
Most of the dangers and pitfalls of Facebook are from how one could
haphazardly use it, not from joining it. Bob seems to enjoy it and I'm sure
everyone respects his technical abilities.
73 Ross K9COX
___
FlexRadio Systems Mailing List
FlexRadi
Is that why your suffix is MOX?
I am just worried about a
possible disconnect in the middle of a transmission and the transmitter
being stuck in the keyed position. Any thoughts?
Adam
N8MOX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.
Dear Flexers,
Wow, what a success we had in Dayton this year! It was a tremendous honor
for our team to meet so many of you and to hear how much you enjoy your
radios. You are our number one sales team because you spread the word to
your friends about your enjoyment of our products. We sincerel
There was a Saturday Morning Network show wherein one of the
guests talked about the dangers and pitfalls of Facebook.
It was enough to keep me from trying it
73, Dick, W1KSZ
-Original Message-
>From: Paul - K6HR
>Sent: May 17, 2010 12:39 PM
>To: y...@aol.com, FlexRadio@flex-radio.biz
Same here. I'd love to see them, but joining Facebook is out of the
question.
Paul Delaney
K6HR
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of y...@aol.com
Sent: Monday, May 17, 2010 8:29 AM
To: FlexRadio@flex-radio.biz
Hi guys, once again I have another question for all of you, I hear talk
about remote operations and I am curious, has anyone run into a problem
with the 3000 on a remote setup getting stuck in transmit mode? What I
would like to do is, log into my PC via a little program I like to use
called
Are you using Skype for the audio connections?
I have noticed this audio level effect when using Skype for the remote audio
connection to my PC running PowerSDR.
With the recent latest update to the Skype software this effect has become a
bit more pronounced.
I believe that this is a reaction of
It probably has something to do with the VoIP software you are using since this
behavior has never been reported with PowerSDR by itself.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Rob
Sent: Monday, May 17, 201
Have exactly the same thing here too.
So much so it makes remote voice impossible to use.
The sound hunts up and down after a few minutes just listening.
An OFF/ON resolves itfor a few minutes at least!
Looking fwd to the solution.
Rob
On 17 May 2010 17:32, Stu Phillips wrote:
> Ken,
>
> Di
Ken,
Did you have MultiRx enables and Sync VFO selected at the same time? I
had a similar issue myself some months back - generates similar symptoms
to that you describe below. Took me a while to figure out what I'd
done!
Stu K6TU
-Original Message-
From: flexedge-boun...@flex-radio.bi
I got a e mail that said I could see the pictures of the flex dinner on sat.
Went to look and found out I had to join Face Book. I don't want to do this for
various reasons. Is there any way to see the pictures and be able to put faces
and names ,before I forget who I sat with.
thanks
dale wt4t
On 05/17/10 10:04 am, Bob McGwier wrote:
http://www.facebook.com/album.php?aid=179399&id=827451648&saved#!/photo.php?pid=4257177&id=827451648&fbid=411342171648
Is there somewhere these could be made available without having to sign
in to Facebook? I don't do Facebook.
73
Alan NV8A
Open to the public.
http://www.facebook.com/album.php?aid=179399&id=827451648&saved#!/album.php?aid=179399&id=827451648&page=2
--
(Co)Author: DttSP, Quiktrak, PowerSDR, GnuRadio
Member: ARRL, AMSAT, AMSAT-DL, TAPR, Packrats,
NJQRP, QRP ARCI, QCWA, FRC.
“One must be a fox in order to recognize tra
http://www.facebook.com/album.php?aid=179399&id=827451648&saved#!/photo.php?pid=4257177&id=827451648&fbid=411342171648
--
(Co)Author: DttSP, Quiktrak, PowerSDR, GnuRadio
Member: ARRL, AMSAT, AMSAT-DL, TAPR, Packrats,
NJQRP, QRP ARCI, QCWA, FRC.
“One must be a fox in order to recognize traps,
and
We'd like to see a video - - or at least an audio file.
Stephen Hicks, N5AC wrote:
Bob, the forum was awesome this year -- thanks for organizing it and thanks
to all the speakers for their presentations. The room was jam packed,
literally standing room only and flowing out into the hallway. My
Bob, the forum was awesome this year -- thanks for organizing it and thanks
to all the speakers for their presentations. The room was jam packed,
literally standing room only and flowing out into the hallway. My rough
count was 225 people.
Steve
On Thu, May 13, 2010 at 06:09, Robert McGwier wr
So you're suggesting we cull the old timers? I gave a talk recently about
SDR with live demonstrations - they were converted.
In my talks I always suggest that every club should have a few SoftRocks to
lend to potential SWL's.
For me 'real radio' is homebrew, but I do admire the fine contest
mark
great reference.
or how about 'out of the blue clear sky'one of MY favorites..
--- On Mon, 5/17/10, Mark Lunday wrote:
From: Mark Lunday
Subject: Re: [Flexradio] CW 'dead' 'useless' ??
To: "'Eddie DeYoung'" , flexradio@flex-radio.biz
Date: Monday, May 17, 2010, 3:55 AM
Eddie, I'll kee
51 matches
Mail list logo