Hello,
I'm considering buying a Flex-1500, but somebody here has complained about
the audio.
I don't know if that is a user-problem, newbie that don't know how to
configure it right, or if the audio amplifier used in it is bad, or
broken.(?)
I would require a flat audio curve within the SSB
I finally had my SDR-1000 up working with Win764bit on a Toshiba laptop, and
a special driver for the USB-cable.
I worked very nice for a while.
Then suddenly my USB-cable was dead!
(Maybe caused by thunder. But everything else in shack was ok.)
Now my SDR-1000 is useless without that cable.
Well! I have never done ANYTHING so dumb (since yesterday)
Bob
Sent from my iPad
On Jul 31, 2011, at 7:29 PM, Neal Campbell abrohamn...@gmail.com wrote:
I sincerely am not meaning to make fun of Greg but this is an example of my
method of problem analysis!
I always assume that the most
On Mon, Aug 1, 2011 at 1:45 AM, Stig Rasmussen la4...@online.no wrote:
Hello,
I'm considering buying a Flex-1500, but somebody here has complained about
the audio.'
The audio on mine is fine. This does seem to be an isolated case.
I don't know if that is a user-problem, newbie that don't
Hi all,
I have been working on this one for a while!
I am pleased to announce that I have a small, low-cost system designed
especially for Flex-1500 users that costs $499.99. This system comes in a
very small case thats only 13 x 9 x 5. It has a dual core N525 Atom
processor running at 1.8GHz,
Stig,
I have been very impressed with the Flex-1500s audio system accuracy.
Because the direct-conversion signal goes directly into a CODEC to be
digitized, there is no string of IF and AF amplifiers to affect the signal.
From the CODEC, the digitized signal goes via USB to the PC at a maximum
OK all you Flex Guru's, here's what I would like to do. I would like to
run HRD and Bob's S meter at the same time. The problem I am having is they
can't share the same virtual com port. In Power SDR I assign a virtual com
port created in Comm0Comm to Cat Control. If I use the Comm0Comm
-Original Message-
From: Gary Shriver
Sent: Monday, August 01, 2011 11:44 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Running HRD Bob S Meter
OK all you Flex Guru's, here's what I would like to do. I would like to
run HRD and Bob's S meter at the same time. The problem I
Gary
Based on what you have posted DDUtil or DataDecoder will do the trick nicely
for you.
It is a great package.
Keith
On 8/1/11 2:44 PM, Gary Shriver gshri...@charter.net wrote:
OK all you Flex Guru's, here's what I would like to do. I would like to
run HRD and Bob's S meter at the
I have had the probl;em of not being able to relink my flex to my
computer after sutting down the system. I had to reinstale the drivers
and program. II was runnig a Gatway with windows 7. I installade a new
1394 a/b port card. And that cleared up that problem. Now my flex
dosen't tranmitte.
Try doing a factory reset of the database. It is the button at the bottom left
hand corner of the Setup screen.
-Tim
---
Sent from my iPhone with typos included at no extra charge.
On Aug 1, 2011, at 9:38 PM, n0...@cox.net wrote:
I have had the probl;em of not being able to relink my flex
11 matches
Mail list logo