I think my reply tops yours, Kirk. I did not reply.
Chuck, AA5J
Stewart Haag wrote:
LET'S SEE ANYONE TOP THIS REPLY
- Original Message -
From: Kirk K6KAR
To: 'Stewart Haag'
Sent: Sunday, May 10, 2009 3:06 PM
Subject: FW: [FlexRadio] Re: Flex-3000 Limited TX Bandwidth
From:
Pete,
I had that same problem over and over until I broke down and bought a
parallel port card. Anyone want to buy a USB to parallel cable for the
SDR-1000?
I will make you a deal.
73
Chuck AA5J
n3evl wrote:
When running my SDR1000 using the usb-parallel adapter I've noticed
the USB
a file here
via this reflector - or even if that's OK with Flex.
Good luck.
Terry WB4JFI
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz]on Behalf Of Chuck Mayfield
Sent: Wednesday, February 18, 2009 8:55 PM
Cc: FlexRadio Reflector
I note that FRS is introducing new radios that have an IEEE 1394
interface between the computer and the transceiver. Will Linux drivers
be developed? The current IEEE1394 driver situation seems to me to be
very difficult, if even possible, to configure. In fact, I have not
been able to get
Duffy wrote:
I was wondering why the post from Luis Cupido CT1DMK replied he was
using a sdr1000 like hardware when asked if his problem, asked
here, was a 1000 or a 5000 radio. Went over to the Yahoo Wonder Radio
(sdr1k indian clone) site and guess what. Here is Luis postin about
his
SDR-1000, 100W, ATU, USB I/F CABLE, PARPORT CABLE, EDIROL FA-66 $1500
+POSTAGE, OR BEST OFFER
SAVE POSTAGE IN DALLAS AREA BY PICKUP. QRZ GOOD.
CHUCK AA5J
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
For the last few days, had problems with PA calibration first using the
test branch version. Not sure which revision.
Then today after another svn update I noticed lower than normal power
output. Tried an 80m PA Calibration, advanced mode. Seems like same
failure as previously with test
I have been trying to get my FA-66 working in Ubuntu 8.10. Here is
where I get stopped:
I am trying to use this procedure:
Now let’s compile freebob. Get the sources from the SVN repository (the 1.0
stable
branch):
svn co https://svn.sourceforge.net/svnroot/freebob/trunk/libfreebob
Ken wrote:
Is there any place on the flex site that details or lists the differences or
pages that changed between the latest release of the manual and the last
one? I'd hate to have to print out another copy of the complete manual to
stay current with the latest.
Thanks,
Ken - N8KJG
Tim Ellison (W4TME) wrote:
QST to all Flexers,
The FLEX-5000 Owner's Manual v1.14.0 is now available for download. This
version of the manual contains all of the updates for PowerSDR 1.14.0
including updates related to the new Firewire device driver.
SDR-1000 users should use this manual
Ray, K9DUR wrote:
I have recently issued 2 updates to my SDRDataTransfer.exe utility.
v1.5.0 -- Added a check to see if PowerSDR is running. If it is,
SDRDataTransfer issues a warning message telling you to close PowerSDR
then exits.
Thanks, Ray. I appreciate the idiot-proofing Hi
FWIW, here is my cw setup:
SDR-1000, 100W, ATU, Edirol FA-66, Power SDR v1.14.0 SVN 2425
external keyer, keying key jack on rear, using ring, (tip open)
Setup
Audio: Buffer Size 512, Sample Rate 96000
Display: Panascope mode, Time 1
DSP: CW RX: 4096, TX: 256
Break In Enabled, Delay 10 ms
Ray, K9DUR wrote:
New setup data for the SDRDataTransfer.exe utility is now available for
PowerSDR v1.14.0 for SVN #2428.
If you have SDRDataTransfer.exe version 1.4 (highly recommended), all you
need to do is select Update Setup Data from the File menu.
If not, you can go to
Ray, K9DUR wrote:
Chuck,
Simply resize the main PowerSDR window to cover the RX2 controls. With the
mouse over the bottom edge of the main PowerSDR window (the cursor will
become a vertical double-headed arrow when the mouse is in the correct
position), hold down the left mouse button drag
Lee A Crocker wrote:
Grab the bottom of the screen and pull it up until it disappears
73 W9OY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Ray, K9DUR wrote:
Chuck,
Simply resize the main PowerSDR window to cover the RX2 controls. With the
mouse over the bottom edge of the main PowerSDR window (the cursor will
become a vertical double-headed arrow when the mouse is in the correct
position), hold down the left mouse button drag
Chuck Mayfield wrote:
Ray, K9DUR wrote:
Chuck,
Simply resize the main PowerSDR window to cover the RX2 controls. With the
mouse over the bottom edge of the main PowerSDR window (the cursor will
become a vertical double-headed arrow when the mouse is in the correct
position), hold down
All the links on the reflector to articles in the KB are Broken! Is
there a way that you can fix the obvious problem that most previous
reflector posts containing links are now essentially worthless?
Also, the e-mail address to which these posts are sent and received is
not recognized at
searching for
KC articles. And as previous noted, logging on to the KC is not required to
access its content.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chuck Mayfield
Sent: Wednesday, September 03, 2008 6:30 PM
To: FlexRadio List
Neal Campbell wrote:
Hi Guys,
Just a few observations:
1. Tim, who manages this, isn't an employee of Flex and I can testify
that the boy works many hours a day at his paying job in addition to
the time that he donates to us in operating our radios better
2. The new Knowledge Center was a
Hey, guys
I have made a discovery, I had previously tried using an external keyer
with the same crappy keying waveform that I get on the dots using the
internal keyer.
Lo and behold, I moved the keying signal from the dot (tip) to the dash
(ring) and the keying waveform is great. Don't have
Jim Lux wrote:
And..
right now, I believe Flexradio has a no new features sort of policy
in place while they try and get to the 2.0 revision.
And I, as a happy SDR1k owner/user support that position. The SDR1K is
what it is and any changes in PowerSDR that increase its capabilities
and
Ray, K9DUR wrote:
Chuck,
You not only have to add a record for the frequency you want to label, but
you also have to split the range of frequencies that the labeled frequency
is in into 2 separate records so that they do NOT include the labeled
frequency.
Thanks, Ray.
73, Chuck AA5J
Tim Ellison wrote:
I believe the OO tool is mucking up the Access database. Obviously it is
truncating the precision of the field value which is probably why you are
receiving the error. The data is there, but OO is not showing it.
Maybe if you can provide a detailed band plan for digital
Gerald Capodieci wrote:
Fan Noise made irrelevant may sound like wishful thinking. But, mine effected
me only on transmit since I use head phones. My Heil C5 mic picked up the
sound of all fans and any other noise in the house. All seems well after I
tinkered with the PA Gain Settings. My
Joe - AB1DO wrote:
Hi Chuck,
I have seriously considered separating the hardware from the software
and, as you suggest, producing a hardware manual and a common software
manual. However, there are a lot of subtle interactions between the
hardware and the software and, in fact, a fair
Tim Ellison (W4TME) wrote:
The updated FLEX-5000 Owner's Manual is now available for download from the
FlexRadio Systems web site. It is aligned with the 1.12.0 version of
PowerSDR.
You can access it using the following URL:
http://support.flex-radio.com/Downloads.aspx?id=183
It is a 3
Dudley Hurry wrote:
Chuck,
The parallel port address on a PCI card should be a 4 digit number,
so you will have to manually type it into the Setup menu for the 1K..
To find that address go to Windows Device Manager = Ports (Com LPT)
= your new LPT port right click on the new LPT =
This FRS-recommended Dell Dimension E520 has no parallel port and no
serial port.
That makes it pretty much incompatible with SDR1K IMO.
I have gotten tired of the USB disconnects that occur several times per
hour of operation. So,
I bought a PARALLEL-PCI card from the Web. It is made by Lava
All of a sudden, WWV shows up at ~2.511, 5.022, 10.044 MHZ.
tried deleting the database and wisdom.
restarted 1.12 and same thing.
Can not calibrate frequency.
Using ver 1.10.4, DDS Offset was 3125.
dds offset has been reset to zero.
Using ver 1.10.4, DDS Offset was 3125.
changing it makes no
I am confused. Perhaps someone here can help straighten me out.
On page 12, concerning the parallel cable, I see this statement:
These are called RS-232 cables by some manufacturers.
Is that correct? RS-232 is a serial protocol and I know that the pin
diagram of RS-232 and parallel cables are
://www.cablesnmor.com/index.asp?PageAction=VIEWPRODProdID=123
http://www.infinitecables.com/pop/cb_pr-aa1-6.htm
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chuck Mayfield
- AA5J
Sent: Tuesday, April 29, 2008 9:11 PM
To: FlexRadio List
Subject
Does anyone on this reflector use the FA-66 with Linux?
Need help setting up driver.
73
Chuck AA5J
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
If I set the sound card buffer size below 2048 my cw keying becomes erratic.
sampling at 192k, edirol fa-66.
Does that make any sense to you gurus?
THANK YOU IN ADVANCE
Chuck AA5J
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Mike,
How does 'FREE' work for you? Ubuntu 7.1 is easy to use. Kubuntu is
almost the same as Windoze for the user. It comes with Thunderbird,
Firefox, Open Office and many more applications. If you have
broadband internet you can download Ubuntu 7.1, or if not, the folks
at Ubuntu will
I had problems keying my SDR1k until I connected tip and ring
together. I tried with just tip and ground and ring and ground and
both were flaky.
Chuck AA5J
At 09:15 AM 12/25/2007, Gerald Youngblood \(FlexRadio Systems\) wrote:
Hi Mike,
I know that customers are using straight keys and
Have been off the air with SDR for awhile. Today updated to SVN 1780.
wizard. calibrate PA all is well
had a Qso on lsb, seemed ok.
went to CW. dits worked ok. dahs not at all, the no sound and no pwr
out.
went back to 10.1 and everything works as expected with that release.
Chuck AA5J
Anyone know how to make the SDR-1000 scan the listed ALE frequencies?
Will HFALE do it?
TIA,
Chuck AA5J
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link:
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070122/7f12bfa6/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
Larry wrote:
Bob, you're one dummy that we couldn't do without! Thanks
The only question I have about it is ... does it follow that the rolloff
would get better with a slower sampling rate? It was originally noticed with
the Edirol card in the 192 khz sample rate setting and when the sample
I downloaded the trial versions of VAC 4.03 and Mixw 2.17. Installed
them and got them running with my SDR-1000. Unfortunaltely, without
warning, an SSB signal saying Trial every four seconds or so seems to
be mixed with the digital output and apparently with the tranmitted
output. I was not
UH-OH! There I go again, barking up the wrong tree. I am still
dissapointed that an apparently unadvertised software trap caused me to
transmit SSB on a non-SSB frequency, even if it was for a very short
transmission. When I saw the SSB-wide signal in the PowerSDR display
along with the
At 09:59 AM 12/20/2006, A.R.S. - W5AMI wrote:
On 12/20/06, Eric Wachsmann [EMAIL PROTECTED] wrote:
After listening to the wave file, I would tend to believe that what you
described (swapping subbands around) is exactly what they are doing. I
definitely couldn't find any way to make any
I tried searching the TT site using various combinations of the
(un-specific) cite you made.
For us other dummies, would you mind providing a link?
-AA5J
At 12:21 AM 12/18/2006, [EMAIL PROTECTED] wrote:
AGC Optimized (optomized,sic) for what ?
Pretty soon I am going to be forced to re-quote
What is the correct cable to plug the PR-40 into the FA-66?
TIA and 73,
Chuck - AA5J
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link:
Thank you, John and Tim.
73,
Chuck AA5J
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage:
46 matches
Mail list logo