I'm with you Jerry. I have 4 Rb oscillators and only one still runs. I
also have 4 GPSDOs and they all have always worked.
Also, with ThunderBolt GPSDOs, you get to play with Lady Heather, and that's
a real learning experience!
John Stuart, KM6QX
FMT Nut with a
TBolt-B 1.19
TBolt-C 1.39
DEMI 10-4 (with 50 ohm loads on all output ports)
Port A 1.30
Port B 1.32
Port C 1.32
Port D 1.32
These amplitudes range from +11 dBm to + 13 dBm
John Stuart, KM6QX
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Beha
I bought the Splatter View 200 package, which includes an RF-Sampler for
testing your amplifier output.
Highly rated on eHam.net: http://www.eham.net/reviews/detail/8667
John Stuart, KM6QX
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...
the spectrum graph to you directly.
The Flex-1500 used the Texas Instruments TLV320AIC33 CODEC. Here is the
datasheet link so you can see all of the specifications:
http://focus.ti.com/lit/ds/symlink/tlv320aic33.pdf
John Stuart, KM6QX
-Original Message-
From: flexradio-b
.).
What mode would you be using (phone, cw, data)?
John Stuart, KM6QX
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Brian Lloyd
Sent: Monday, May 16, 2011 10:41 AM
To: FlexRadio reflector; flexe...@flex-ra
urement"
wasn't just a job I enjoyed very much, it was a passion!
John Stuart, KM6QX
_
From: geo...@gloria.us [mailto:geo...@gloria.us]
Sent: Monday, April 18, 2011 8:02 AM
To: John Stuart
Cc: FlexRadio@flex-radio.biz
Subject: Frequency Errors in the F5K and F3K
I hav
of the settings in my first paragraph above, when I
'receive' my 10 MHz Rb oscillator signal, I measure a 600.042 Hz audio tone
at the Phones jack.
John Stuart, KM6QX
Lafayette, CA
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@
/Ring "Y" cable so I could plug the headset into the left side and not
short-out the right side.
So I guess I have to replace the adapter's mono plug, with a stereo plug,
with just the tip and sleeve connected. Is this necessary, or is it OK to
run with a mono plug in the Phones
.
John Stuart, KM6QX
Lafayette, CA
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
.
John Stuart, KM6QX
Lafayette, CA
_
From: br...@lloyd.com [mailto:br...@lloyd.com] On Behalf Of Brian Lloyd
Sent: Saturday, December 04, 2010 10:58 AM
To: John Stuart
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Tuning Accuracy for FMTs
On Fri, Dec 3, 2010 at 9:24 PM, J
but still
unsure about how the Spur Reduction function might affect accuracy at
frequencies other than my 10 MHz test frequency.
Now if we could get fldigi's fast and high resolution frequency counter
built into PSDR, , , ,
John Stuart, KM6QX
__
gnal attenuated by 10 dB to eliminate internal 'leakage', and
when splitting it into the Antenna port, I attenuated it down to an S9 or
so.) The NCO IF frequency is another 'unknown' that I will now have to
learn about, , , but that's what hobbies are for!
John Stuart,
tep saw-tooth
like fashion, and can be from +0.357 Hz higher to -0.353 Hz lower than the 1
Hz resolution VFO 'dial' indicates.
John Stuart, KM6QX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.b
13 matches
Mail list logo
