Hello, I have been reading and followinghere as others and haven't made a
comment here for a long time. I still own a Flex5000 and used toown a Flex3000
for mobile use. I bought the Flex5000 new when theyfirst came on the market.
Some reason or another I ended up in the secondwave of receiving
Hello,
I tried to search the data base on the subject of Scratchy Audio but I am not
having any luck.
I have a Flex 3000 using XP with an on board firewire. There is no more slots
available to add an extra Firewire card. I am using the 2.0.16 PowerSDR.
This is all used in my truck with a 10
From: FlexRadio Support, Dudley Hurry supp...@flex-radio.com
To: Ken Danser k...@verizon.net
Cc: Flex Radio flexradio@flex-radio.biz
Sent: Fri, December 3, 2010 5:51:12 PM
Subject: Re: [Flexradio] Scratchy Audio
Ken,
You say it works ok with the 5000?Interesting..
You
Floyd
To: Tim Ellison ; Rob ; Stu Phillips
Cc: Ken Danser ; FlexRadio@flex-radio.biz
Sent: Monday, May 17, 2010 12:14 PM
Subject: Re: [Flexradio] [FlexEdge] Receive Audio Via Remote Station
Are you using Skype for the audio connections?
I have noticed this audio level effect when
Hello,
I have a QRO 2500DX and this has always done this with my setup.
I just simply place the transmit toggle switch to standby and then power
down the FLX5000. The reason I do not power down the amp first is because
the tubes need to cool down for a bit before shutting completely down.
Hello,
I have a QRO 2500DX and this has always done this with my setup.
I do run a switching transistor and a small cap in line of the circuit
between the FLX5000 and the amp.
I just simply place the transmit toggle switch to standby and then power
down the FLX5000. The reason I do not
Just commenting toward your first statement:
Maybe you should buy one and use it first and then you will !!! Its that
simple!!!
On Sun, Jan 10, 2010 at 4:34 AM, lazysenior lazysen...@verizon.net
wrote:
Somehow I just aint't getting it?
The Facts as I know them:
1. The spur Problem was
Hello Flex-er!
While listening to both receivers, is it possible to mute the first (main)
receiver and only listen to the 2nd receiver only?
I experience when turning down the volume for the main receiver, it also was
muting out the sound for the 2nd receiver.
I was able to mute the 2nd
Hello All,
I agree on a plug-in GUI, but to set up the PowrSDR to look like an Vintage
rig with tubes or such, then I'll say go buy the real thing! (Nothing Personal!)
Lets make the GUI look like something out of this world (A WoW Factor!)
Maybe something in the order of 3-D. Also the
How small? 7 inch, 10 inch or small as in a 14 inch compared to a 22 inch!
Ken
K3YI
- Original Message
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
To: flexradio@flex-radio.biz
Sent: Friday, August 1, 2008 7:18:42 AM
Subject: [Flexradio] Small VGA MONITORS
I am looking for a small VGA
Hello,
Just a thought from my own experience. I replace my video card with one that
has 1 gig of memory on board the video card itself. The lock ups using web
browsers is not as often.
Maybe with a better video card with more onboard memory then the one I am
using, may even have better
Hello All!
I just installed the new HRFIO 34 board and I am getting the error (RFIO:
error or not present).
I deleted and un-installed all drivers and PowerSDR completely.
I then reinstalled everything back on as usual and I am still getting this
error. I looked in the PDF file on the
out!
- Original Message
From: Tim Ellison [EMAIL PROTECTED]
To: Ken Danser [EMAIL PROTECTED]; Flex Radio flexradio@flex-radio.biz
Sent: Tuesday, July 22, 2008 10:47:24 PM
Subject: RE: [Flexradio] HRFIO 34
You have to update the EEPROM with the board's new assembly number and revision
Hello,
I am one who usually sits back and watch things unfold and hope to learn from
this reflector without making to many statements.
Also I personally understand your concerns about any issues with the Flex5000.
But I must say, if you are holding out because of a few issues that not
Hello,
I don't see anyone stating to click the Stop button before powering down or
exiting out of PowerSDR!!!
I think everyone means to say it, but it isn't being written! So be sure to
hit that Stop button first, then exit out of PowerSDR!!!
Ken
K3YI
Still loving my SexyFlexy5000a!
Wow! I was always told to hit the Stop button first!!! Thank you Eric!!!
Ken
K3YI
Still loving my SexyFlexy5000a!
- Original Message
From: Eric Wachsmann [EMAIL PROTECTED]
To: Ken Danser [EMAIL PROTECTED]; Flex Radio flexradio@flex-radio.biz
Sent: Thursday, May 29, 2008 6:39:26 PM
Hello,
Having the 5000A, I was looking at the 5000C on the Flex site. Curiosity
caught my attention on the down loading of software for the 5000C. How does
one load any software onto the 5000C. Is it all done by networking? The idea
is to use it as a radio, but if the software gets
Hello,
Does anyone know why the Headphone Monitor does not work in AM?
I would like to monitor my audio while transmitting on AM.
Thanks,
Ken
K3YI
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hello,
First let me say thank you for all of those who participate answering my
questions! I sometimes don't follow up with thank you only emails, but all is
appreciated and everyone here as always are doing a great job, so (Thank you
Very Much!)
My new questions: First a few more words!
Hello,
Can someone tell me if the future transverters will work on FM up in the FM
portion of the band, or is it only going to work for SSB weak signal
communications?
Thank you,
Ken
K3YI
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Their had been a recent email that had gone out about reporting PowerSDR
issues. I may be wrong and please correct me one way or another, but is this
still the place to discuss bugs and other issues with PowerSDR?
Anyway for now, I am glad to report that the recent second file that was sent
Don,
It happens here too. I just exit PowerSDR, hit the Blue button to turn off
the rig. Wait a few seconds, then hit the Blue button again to turn on.
Wait a few seconds, and then click onto PowerSDR. It is best to wait a few
seconds before starting up PowerSDR after hitting the Blue
What Chris has mentioned may be true for others as well.
I may have stumbled onto something that relates to Chris' statement.
Let me start by stating that I had never had an issue with the receiver locking
up until two months ago.
I heard of others having this problem, but I did not pay to much
Same here. Running the Flex 5000 with Intel 2 duo 2.4 processor w/ 4 gigs of
ram on an XP-pro machine.
David Gardner [EMAIL PROTECTED] wrote: Downloaded the new firmware 1.1.10,
SVN 2000, keyed and unkeyed radio
with MOX many times(30) no drop out of receive, until joining a QSO
then after
24 matches
Mail list logo
