Hi Alan,
You are not mentioning the UCB form where you tell the application what
bits you want activated.
The first two entries are dedicated to the V/U module,
Be sure to press the FlexWire button on that form.
And you must select each bit that you want activated for each band.
You can get to
While cleaning I also found a PCI Firewire card. This is not PCI-E
Let me know if anyone is interested, I'll let it go for a small price
plus shipping.
Email off list.
Thanks,
Phil K3TUF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hi,
I have made the transition to ethernet for my radios and have a PCI-E
Firewire adapter card and a 10 foot Granite Digital cable available.
Is anyone interested?
If so, please reply off list.
Thanks,
Phil K3TUF
___
FlexRadio Systems Mailing List
Actually this needs to go to Steve, K5FR who writes DDUTIL.
Phil K3TUF
On 10/23/2014 7:37 AM, Tim Ellison, W4TME wrote:
Send BCD questions to Phil, K3TUF. His e-mail is his name @ his-call.com
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Hi,
What are the best settings to have quick cw, unfortunately I had to
switch to a radio with knobs during the DX contest, was missing the
first symbol. Tried some settings, but couldn't get it under the
pressure of the contest.
Using 2.3.5 on W7 machine with i7 processor and tons of ram.
Don,
I use it for switching transverters and through DDUTIL you can switch HF
antennas as well.
It simply needs a PCA9555A chip on the I2C port.
I put together a little peripheral for this purpose. I documented it at
k3tuf.com/FW.html
73,
Phil K3TUF
Emory,
You have all you need in the transverter to get levels set correctly.
It's the right way to go, drive your transverter at 0 dbm.
All of my transverters are driven with low power.
Check your DEMI manual, all of the level settings are documented there.
73,
Phil K3TUF
I was asked today and didn't have an answer regarding the preamp button.
What controls the state of the on and off in the window? There is a
situation where the on is displayed but the display is faded. Change
band and the on is displayed but it is in increased intensity.
What governs the
Can someone outline the procedure for operating split outside of the
width of the radio.
For instance. DX on 14.145 and TX on 14.255
I do have RX2, but feel dumb not being able to set this up.
Thanks
Phil K3TUF
___
FlexRadio Systems Mailing List
I have begun to update the website with information on VHF transverter
interfaces for the FlexWire port.
See k3tuf.com and choose FlexWire Information
Thanks,
Phil K3TUF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Just a quick note to say that there is now a custom driver for Flex
Radios available for the N1MM logging software.
Go to N1MM.com for the latest update. Thanks go out to the tireless
efforts of John, K3CT for the programming and to Flex for providing the
resources to get this finished.
73,
Regarding the selections in the settings menu.
What happened to audio gain in the double click category?
only available in the single click drop downs.
thanks
Phil K3TUF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
You can get band data out via the DDUTIL utility
There currently is a way to get band data for VHF and above bands
through the XVTR form and the FlexWire port.
Soon, (next version) there will be HF band data out the FlexWire port.
I have an interface board that decodes the I2C from the
I have several beta test positive results so I am now ready to take
orders for the daughter board for the UCB.
This will take FlexWire instructions from the 5000, 3000 or 1500,
although I have not had it tested on a 3000.
Currently PowerSDR only sends instructions out the FlexWire port for
Bob,
Sorry I missed one of your emails.
How are you driving your UCB from DDUTIL? What is the physical
connection to the board?
I am driving my UCB directly from the I2C port on the Flex, otherwise
known as the FlexWire port with the addition of a single I2C chip which
will soon be available
I have a 5000A with antenna tuner available for sale. $2300 shipped conus.
Contact Phil K3TUF at this email or call 717-721-6262
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Just to alleviate any panic that might have been brewing, I am selling a
spare F5K in anticipation of getting a 1500 for roving use.
My need for multiple 5K's has been eliminated by the addition of a
nearby (front yard) rotating Rohn 55 tower. Now all of my antennas are
within large feed line
Does anyone have an SDR-1000 usb/parallel adapter they want to sell?
Phil K3TUF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
What can I do to eliminate sounding scratchy on 160 when driving an
amplifier? The 1/4 wave vertical is over a hundred feet from the house
where the radio is and presents at minimum a 1.2:1 vswr. No signs of rf
in the shack at all. This occurs while using CW. The amp is a QRO 2500.
Even if
Thanks Mike,
That made the difference.
Phil K3TUF
Mike Penkas wrote:
It didn't work for me with WDM so switched to MME and it took off.
Mike WA8EBM
- Original Message - From: Phil Theis p...@k3tuf.com
To: 'Tim Ellison' telli...@itsco.com; flexradio@flex-radio.biz
Sent: Sunday
Now that I have the interface working I have another question on
frequency calibration.
The skimmer frequency readings are not consistent with the actual
frequency, they appear to be about 8-10KHz higher than the actual frequency.
I do not have SR on, so that is not the cause.
Any info to head
Using the KB article to set up CW Skimmer Configuration using VAC Direct
I/Q I get the error invalid device
Using 5000 and 1.19 of PowerSDR
Any thoughts?
thanks,
Phil K3TUF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Yes, and I tried an earlier version; trunk.
Same results. PowerSDR only on. VAC is set up with two cables and
Configuration is as in the KB article.
The error is PortAudio Error; Invalid Device.
any more thoughts appreciated.
Phil K3TUF
Did you start PowerSDR and enable VAC before staring
both cables to Cable Range.
-Tim
-Original Message-
From: Phil Theis [mailto:p...@k3tuf.com]
Sent: Sunday, September 06, 2009 8:38 PM
To: Tim Ellison; flexradio@flex-radio.biz
Subject: CW Skimmer and PowerSDR
Yes, and I tried an earlier version; trunk.
Same results. PowerSDR only
Where can I get a power connector for the 5000? Does anyone know the
molex (or other) part number?
Thought the cable might be an option, but not to be found.
thanks
Phil K3TUF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Hi Basil
what other radio were you going to use? or were you thinking of using
rx2 as the second radio?
I am working toward the same configuration, but with the current state
of the software I believe you are going to need two radios and two sound
cards for full low band SO2R.
Check the N1MM
I'm on a mountain working the contest and I brought along my 5000a for
the 144 station.
I'm using test branch (I know, a mistake) svn 3065 and can't get back to
earlier branch.
What I am experiencing is intermittent gain. I need to run fast agc.
What happens is the gain doesn't come back all
I am having an issue getting this configuration to work.
VAC is set up and PowerSDR is setup.
I am receiving just fine.
But when I go to transmit I do not get tx audio. Radio keys ok.
Also, the receive takes about 15 seconds to recover.
Thoughts please,
Phil K3TUF
-radio.biz] On Behalf Of Phil Theis
Sent: Thursday, June 11, 2009 1:05 PM
To: Tim (W4TME); flexradio@flex-radio.biz
Subject: [Flexradio] WSJT and PowerSDR using VAC
I am having an issue getting this configuration to work.
VAC is set up and PowerSDR is setup.
I am receiving just fine.
But when I go
a fairly good job of helping you figure out how to
make sure the sound card interface is setup correctly
http://kc.flex-radio.com/KnowledgebaseArticle50362.aspx
I would check this first.
-Tim
-Original Message-
From: Phil Theis [mailto:p...@k3tuf.com]
Sent: Thursday, June 11, 2009 1:52 PM
Please don't buy another room at Dayton till my prepaid room is taken.
Super 8 Englewood, just off rt 70 and only minutes from Hara.
$305 for Thursday, Friday and Saturday nights prepaid.
Email me,
Phil K3TUF
___
FlexRadio Systems Mailing List
Contact me,
Phil K3TUF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base:
I just wanted to run this by the group. You are in a contest and
calling cq. Many operators don't call you on your frequency.
Just like the second right click brings up red cross hairs to click tune
the second receiver, wouldn't it be nice to have an additional right
click say bring up green
Is there a simple way to mute RX1 to allow listening to RX2? I've been
sliding the AGC-T down, but there must be a better way.
Phil K3TUF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
My default is using PowerSDR on Flex5000.
I assisted a friend with an Ozy Janus SDR1000, now I can't get the
instance to stop erroring and get back to the 5000 useage.
What can I do short of losing the db?
thanks
Phil K3TUF
___
FlexRadio Systems
Before I put this in for feature request I wonder if it's already there.
Several times during the contest last weekend I ended up entering a
wrong value thinking my focus was in the logging program and sent the
flex off into never never land losing valuable time finding where I was
again.
I'd
Can I run multiple instances of PowerSDR on the same computer?
What is the impact of changing radios per instance of PowerSDR?
Will it sense the sn change and replace the eeprom data?
Just checking before I try.
thanks
Phil K3TUF
___
FlexRadio
Before I put this in the request bin I'd like to see if either the
feature is already available or if it is attractive to others.
When in the heat of a contest it is possible to be in the wrong focus
and start typing a call or number (or whatever) intending the keystrokes
for a logger, but
that hitting the escape key resets the frequency to what it was
originally, assuming of course that you have not hit the enter key yet ;o))
Does this solve your problem, hopefully?
73,
Army - AE5P
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Phil Theis
I have separate 160 meter antennas coming into both RX1 and RX2. I'd
like to receive on the same frequency on RX2 and transmit on the Main radio.
What are some tricks to mute RX1? I have tried dropping the AGC
threshold and increase the squelch, but I'm sure there's a better way
that I'm
I just started getting the following message on startup:
PABridge Checksum ERROR
DB: DFEEPROM: DI Calculated: DF
v1.15.0 SVN:2460
1.2.2.4
no changes for weeks, then the error.
any assistance would be appreciated.
Phil K3TUF
___
FlexRadio Systems
Can any one release information about the 1500? This seems like the
prefect Microwave IF radio, low power and works with PowerSDR.
Phil K3TUF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Jim,
I also paid early and have 5000a serial number 9. I have been using my
5000 on the microwaves since the day I got it. The 5000 has the
connectors to go to a Downeastmicrowave (or other) intermediate
transverter and on to microwaves up to 10G.
Even though the transverter from Flex will
That did the trick, thanks,
Phil
Dudley Hurry wrote:
Phil,
I wonder if it is the UAC, User Account Control in Vista.. I turned
mine off by going to Control Panel = Users Accounts= Turn on/off UAC
= uncheck UAC.Then reboot.
73,
Dudley
WA5QPZ
Phil Theis wrote:
I use Processor
Thanks Eric,
For the record, the issue was .net not installed.
Phil
Eric Wachsmann wrote:
Phil,
I don't think Vista will show you the found new hardware screen if you
already have the drivers installed. If you are talking to the FLEX-5000
Control Panel, then the driver is installed and is
Greetings,
I have a 5K that is working fine with an older computer. My newer computer
which has worked just fine for several months has now developed a driver issue.
At this point the symptom is that when installing the driver, and at the point
of restarting the computer and expecting to find
Thanks for the tips.
Found gadgets.
Running PowerSDR as administrator causes the cpu indicator to appear.
Thanks,
Phil K3TUF
- Original Message -
From: Philip Covington [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: FlexRadio@flex-radio.biz; Robert McGwier [EMAIL PROTECTED];
Phil Theis
Just got a vista machine going. Before I blow it away and put XP on it, I
thought I'd try it out.
powersdr installed like a breeze and the radio appears to work fine, but the
CPU indicator is gone.
What's up?
thanks
Phil K3TUF
-- next part --
An HTML attachment was
I have seen some post regarding contesters and the flex radio.
What do you do about focus of the applications?
How do you switch between the logging program and the radio (flex) program.
This demands a quick poke over to the mouse.
Are there any pc aftermarket products that would enable the focus
Can anyone pass along any successful tricks to minimizing the junk at -11KHz?
I know it's dc hum, but what has worked for folks out there?
thanks
Phil K3TUF FN10we
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
50 matches
Mail list logo