x
>
>
> -Tim
>
>
> -Original Message-
> From: Len Morris VE3FJB [mailto:lmor...@lenmar.net]
> Sent: Sunday, July 25, 2010 9:10 AM
> To: Tim Ellison; FlexRadio@flex-radio.biz
> Subject: Re: [Flexradio] 2.0.6 help.
>
> Thanks Tim and Dudley, it was the mixer, mic
Dave,
The starting with PowerSDR 2.0.x , the firmware is uploaded to the
radio via a firmware loader that is now inside the FireWire driver.
You will need to select the radio that you using by going into "Browse"
and select the latest version in that directory and the actual
.bin fil
Subject: Re: [Flexradio] 2.0.6 help.
Thanks Tim and Dudley, it was the mixer, mic was not selected.
Do either of you know if there is a 2.x manual yet? Way too many features in
2.0.6 that I am sure I could use.
Thanks again.
Len
- Original Message -
From: "Tim Ellison"
To: "Le
ent: Sunday, July 25, 2010 12:05 AM
Subject: RE: [Flexradio] 2.0.6 help.
Did you import a PowerSDR 1.18.6 database into PowerSDR 2.0.6?
Also did you perform the firmware update to version 2.0.1.2 after updating?
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:fl
Len,
Make sure that the Mixer at the top of the console, just like in
1.18.6 is set to mic, urned up to the top, and you may have to raise
the mic gain from the default of 10.Put your TX meter in Mic to see
the audio coming through. Oh an another thing, you might want to
make sure
: Saturday, July 24, 2010 9:53 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] 2.0.6 help.
Hi, I need a hand here. I have a Flex3k, worked just fine with 1.8.6.. I
upgraded to 2.0.6 and all seems to work, except SSB TX. I can get a 100 watts
out in CW, but no output in SSB, it appears there is no
Hi, I need a hand here. I have a Flex3k, worked just fine with 1.8.6.. I
upgraded to 2.0.6 and all seems to work, except SSB TX. I can get a 100 watts
out in CW, but no output in SSB, it appears there is no audio driving the TX. I
have gone through the setup, and can't see anything that would tu
7 matches
Mail list logo
