On Sat, Oct 19, 2002 at 07:47:08AM -0500, David Loszewski wrote:
> I have two different cards on my Netfinity 5000 server, a pci Netgear
> FA311 (showing up as a NatSemi (sis0), and the onboard network card
> which seems to have an AMD chipset (pcn0). If I have the onboard
> ethernet card enab
On Fri, 18 Oct 2002, TheGlenMann wrote:
> In windows I have a printer HP LaserJet 6L, with the correct driver, using
> standard TCP/IP port 192.168.1.205 (where I have FreeBSD/LPD). The port is
> set as LPR and the Queue name is hp6LServ. The windows machine does
> communicate with LPD, but...
>
From: "Daniel Inzirillo" <[EMAIL PROTECTED]>
To: "Freebsd-Questions" <[EMAIL PROTECTED]>
Sent: Friday, October 18, 2002 9:59 PM
Subject: Can't get to Internet - Tinker with /etc/hosts?
> I have two machines connected to a router using DHCP.
> One is a freshly installed FreeBSD 4.7, the other one
On Fri, Oct 18, 2002 at 10:59:07PM -0400, Daniel Inzirillo wrote:
> I have two machines connected to a router using DHCP.
> One is a freshly installed FreeBSD 4.7, the other one runs Linux.
> They can ping each other.
> I can access the Internet from the Linux machine, but not from FreeBSD.
> On st
I downloaded the following from gnome.org "bonobo-activation-1.0.3.tgz" and
gunzipped then untarred it and changed to the resulting directory.
When I ran `./configure` it got through most checks fine, except for the
pkg-config ones near the end. Here is the output:
"... checking for pkg-config..
I have this motherboard and have not seen any problems. If you are seeing
problems I'd suggest tweaking your bios a bit... That always helps me...
Ken
On Fri, 18 Oct 2002, Simon1 wrote:
> As a follow up to my initial post:
>
> A brand new board, with new memory, and a new processor failed to fix
On Fri, 18 Oct 2002 04:51 am, Matthew Seaman wrote:
> > The author also has FVCool, a CPU cooling utility. It
> > reduces my CPU temp by 14 or 15 degrees C (from 46 to
> > 32 or 31). Again, it's native and easy to install.
> > (BTW, yes I do have CPU_SUSP_HLT in my kernel options.
> > This util
Hi,
I've tried to buildworld for 4.7-R on two different 4.6.2-R-p2 machines.
Both fail as follows. Source was downloaded separately for each machine
10/18/20 using
release=cvs tag=RELENG_4_7
Am I missing something? Any suggestions?
Thanks,
Riley
Always do right. This will gratify some peo
I tried to connect two machines with a parallel cable. Some
configuration files are as follows:
In file /etc/rc.conf, add following lines:
inetd_enable="YES"
hostname="pc1.myhome.org"
ifconfig_lp0="inet 192.168.1.1 192.168.1.2 netmask 255.255.255.0"
In file /etc/hosts, add the following line:
On Sat, 19 Oct 2002, Karen LaPaugh wrote:
> Date: Sat, 19 Oct 2002 00:18:12 +
> From: Karen LaPaugh <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: UNIX operating system
>
>
> Are there any limitations to this system? How much does it usually cost an
> individual?
>
FreeBSD is fre
I am trying to debug a boot time kernel panic. This is completely new
territory for me and I need some help. I'm taking this one step at a
time, the first step is to get a crash dump.
This is a repeateable panic which occurs when I boot from my windows
partition to my FreeBSD partition. Once
on public server
i run:
portsentry
tripwire
swatch
arpwatch
- Original Message -
From: "Redmond Militante" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 18, 2002 7:40 PM
Subject: favorite security software
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsub
From: "Karen LaPaugh" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 18, 2002 7:18 PM
Subject: UNIX operating system
>
> Are there any limitations to this system? How much does it usually
cost an
> individual?
>
Hi, Karen last is first, first is last.
FreeBSD is free.
Adult Listings!
On Fri, 2002-10-18 at 19:18, Karen LaPaugh wrote:
>
> Are there any limitations to this system? How much does it usually cost an
> individual?
$0.00 for ALL.
No.
Please read http://www.freebsd.org/
--
Larry Rosenman http://www.lerctr.org/~ler
Phone: +1 972-414-9812
Are there any limitations to this system? How much does it usually cost an
individual?
_
Unlimited Internet access for only $21.95/month. Try MSN!
http://resourcecenter.msn.com/access/plans/2monthsfree.asp
To Unsubscribe: se
As a follow up to my initial post:
A brand new board, with new memory, and a new processor failed to fix the
problem. This newest board comes from a different supplier & etc & etc. I'm
currently installing Win2k on the system to see if it has the same problems.
I'm still seeing that the cards a
Where can I get list of all supported internal modems on FreeBSD(-4.7) ?
I try to use Pentagram Omen modem (vendorid=0x11D4 deviceid=0x1805 ?=?
Motorola SM56 PCI Speakerphone Modem) without positive results
Thanks
Grzybowski Rafal
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscrib
Saturday, October 19, 2002, 1:40:42 AM, you wrote:
RM> do people have any favorite security software that they always run in addition to
ipfw or ipfilter?
Dear Redmond,
My favorite firewall is ipfilter. Mainly because it doesn't run in
userland like ipfw does. This makes it a bit faster becau
Errata and addenda for the Complete FreeBSD, third edition
Last revision: 2 August 1999
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
com
Errata and addenda for the Complete FreeBSD, second edition
Last revision: 21 June 1999
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
co
How to get the best results from FreeBSD questions.
===
Last update 3 September 1999
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that at least one o
Ooops forgot the list...
--- Begin Message ---
Instead of replacing the NIC can't he just use the "link" address family
option in ifconfig to assign a different MAC address so that it appears to
be a different machine?
flagg# ifconfig fxp1
fxp1: flags=8802 mtu 1500
ether 00:30:48:11:b
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hi
just wanted to get people's opinions -
i'm probably going to configure ipfw on a new box. this box is a combo web/ftp/mysql
box.
do people have any favorite security software that they always run in addition to ipfw
or ipfilter?
thanks for
I have two different cards on my Netfinity 5000 server, a pci Netgear
FA311 (showing up as a NatSemi (sis0), and the onboard network card
which seems to have an AMD chipset (pcn0). If I have the onboard
ethernet card enabled at all and have an active cable connected to it
and restart the comp
- Original Message -
From: "dweinberg1" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 18, 2002 8:04 PM
Subject: hi i am having a problem with my sound and with my cdrom drive
working.
> Hi i added 'device pcm' to my kernel and for some reason my sound is
> showing
On Wed, 16 Oct 2002, Bryce Newall wrote:
> > I checked on vgrind and only the Makefile has changed in the last
> > year. I wonder if you have corrupted sources for it. You could always
> > cd /usr/src/usr.bin/vgrind and try rebuilding it and see if that
> > helps. Otherwise, I would remove everyth
Hi i added 'device pcm' to my kernel and for some reason my sound is
showing up on the system when i type 'dmesg | grep pcm" i made the device
nodes in /dev for snd0 and i setup the mixer so that the volume is up on X
windows i can hear the speakers humming but when i try and play a .wav fil
Hello,
My server seems to execute dump everyday at 3:01 every day (there is
no cron job that calls this job) and it allways exits with this error (when I
run dump by hand it give me the same error ( /kernel:pid677 (dump),
uid 0: exited on signal 11 (core dumped). I am using FreeBSD Release
4.6
On Fri, 18 Oct 2002, John Bleichert wrote:
> Date: Fri, 18 Oct 2002 18:36:59 -0400 (EDT)
> From: John Bleichert <[EMAIL PROTECTED]>
> To: Matthias Trevarthan <[EMAIL PROTECTED]>
> On Fri, 18 Oct 2002, Matthias Trevarthan wrote:
> > Date: Fri, 18 Oct 2002 16:30:41 -0400
> > From: Matthias Trevartha
MIKE wrote:
Hello again.
If you want to add it to the KDE panel, first find out where it is
(type 'which ymessenger' in a terminal to find out). Then
right-click on the panel, not on the gear button, until the popup
menu appears. Choose Add->Special Button->non-KDE application and
use the in
On Fri, 18 Oct 2002, Matthias Trevarthan wrote:
> Date: Fri, 18 Oct 2002 16:30:41 -0400
> From: Matthias Trevarthan <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: FreeBSD C/C++ Development Environment
>
> Howdy.
>
> I'm a Windows C/C++ DirectX developer turned FreeBSD systems administrat
At 1:12 PM -0400 10/18/02, TheGlenMann wrote:
Docs on the subtleties on LPD seem to be in short supply. It looks
like the PAGEPROTECT thing breaks the whole system, then the cannot
rename seems to be Windows trying again to send the file...
How can I determine what is wrong? I suspect that permis
On Fri, Oct 18, 2002 at 03:59:41PM -0600, MIKE wrote:
> Fire up KDE. Create an icon for /usr/local/bin/ymessenger or just use
> the Run... dialog.
>
> so, here's where I am stuck. How do I start the program.
It's a common question for folks new to Unix. Yes, you've been spoiled
by MS. :)
Se
in message <[EMAIL PROTECTED]>,
wrote Nick Jennings thusly...
>
> On Fri, Oct 18, 2002 at 01:44:47PM -0400, Fuzzy wrote:
> >
> > cvsup to RELENG_4_7
> > make buildworld
> > make buildkernel KERNCONF=POOHSN
> > make installkernel KERNCONF=POOHSN
> > reboot to singleuser
> >
> > while booted single
On Fri, 2002-10-18 at 14:37, John Bleichert wrote:
> On Fri, 18 Oct 2002, David Smithson wrote:
>
> > Date: Fri, 18 Oct 2002 12:33:46 -0700
> > From: David Smithson <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Subject: question: sending to stdout AND file
> >
> > Hi all.
> >
> > This questi
Hi,
I have an iomega "predator" external (usb) cd-rw drive. Has anyone had success
using this or any other usb cd-rw drive with freebsd?
(please include me on the reply, as I am not subscribed to the list)
Thanks,
Mark
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-ques
> One way is to use the tee command, e.g.:
>
> [johnnyb@zappa johnnyb]$ ls | tee listing.txt
>
> will send the results of the ls command to STDOUT and also to the file
> listing.txt.
# man script
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the bod
On Fri, Oct 18, 2002 at 03:36:51PM -0400, Joe Marcus Clarke wrote:
> On Fri, 2002-10-18 at 14:44, Nick Jennings wrote:
> >
> > On my various linux machines, oaf-slay works fine, however on my BSD
> > box I get the following error:
> >
> > su-2.05b# oaf-slay
> >
> > Can not open directory /usr
At 12:33 PM 10.18.2002 -0700, David Smithson wrote:
>Hi all.
>
>This question is not specifically FreeBSD related.
>
>How do I redirect output to a file *and* stdout simultaneously. My
>particular want is to view the output of a script while also logging the
>output to a text file.
>
>Thanks for y
I've been a Linux user for years but I just installed FreeBSD for the
first time last night. It's on a machine that I want to use as a
firewall, so I started building a custom kernel (with IPFIREWALL, etc.
enabled) from the straight-out-of-the-box 4.7-RELEASE sources. I got
the following erro
I recently inherited a very old Compaq Presario which I decided to put
FreeBSD on. The network card is a generic 10/100 card (it's so generic the
company name isn't anywhere on the card OR in the manual), but searching
google on the model number turns up a Windows and Linux driver and some DOS
rea
The tee command does the job. Thanks!
- Original Message -
From: "Dirk-Willem van Gulik" <[EMAIL PROTECTED]>
To: "David Smithson" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, October 18, 2002 12:35 PM
Subject: Re: question: sending to stdout AND file
>
> > How do I redirect
In message <[EMAIL PROTECTED]>,
Chris Ptacek writes:
>I had a process whose state under top was listed as devbuf.
>This process seemed to be stuck and I was unable to kill it.
>I ended up rebooting the box to reset it.
>
>None of the man pages (TOP, PS) list the devbuf state.
>What is it and wha
On Fri, 18 Oct 2002, David Smithson wrote:
> Date: Fri, 18 Oct 2002 12:33:46 -0700
> From: David Smithson <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: question: sending to stdout AND file
>
> Hi all.
>
> This question is not specifically FreeBSD related.
>
> How do I redirect output t
On Fri, 2002-10-18 at 14:44, Nick Jennings wrote:
> Hi All,
>
> I am using evolution 1.0.8, and it has a tendency to not completely die
> when you close it (various processes still run in the background).
>
> The oaf-slay command is what is used to take care of this. For instance
> when you n
> How do I redirect output to a file *and* stdout simultaneously. My
> particular want is to view the output of a script while also logging the
> output to a text file.
Check out tee(1),
man tee
Dw.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions"
In the last episode (Oct 18), Mike Thompson said:
> I'm interested in setting up two FreeBSD systems in a very simple
> clustering type configuration around centralized external SCSI
> storage devices for hardware redundancy. The specific configuration
> I'm thinking about is shown in the simple d
Hi all.
This question is not specifically FreeBSD related.
How do I redirect output to a file *and* stdout simultaneously. My
particular want is to view the output of a script while also logging the
output to a text file.
Thanks for your time.
--
David Smithson - Systems Administrator
Custom F
On Fri, 2002-10-18 at 14:44, Nick Jennings wrote:
> Hi All,
>
> I am using evolution 1.0.8, and it has a tendency to not completely die
> when you close it (various processes still run in the background).
>
> The oaf-slay command is what is used to take care of this. For instance
> when you n
I'm interested in setting up two FreeBSD systems in a very simple
clustering type configuration around centralized external SCSI storage
devices for hardware redundancy. The specific configuration I'm thinking
about is shown in the simple diagram below:
+---+ +--+ +---
Matt Smith <[EMAIL PROTECTED]> writes:
> The business-as-usual practice would be to not run -Stable, but rather
> run a -Release. -Stable, although more stable than -Current, should not
> be run in business-production, although my hunch is that many small
> environments do.
IMO, the best practic
Hi All,
I am using evolution 1.0.8, and it has a tendency to not completely die
when you close it (various processes still run in the background).
The oaf-slay command is what is used to take care of this. For instance
when you need to modify the evolution data by hand, you must make sure
no
> I don't know if someone has already asked this but what the hell. I
> was just wondering about pgp and sylpheed. I was wanting to set this
> up. I am running FreeBSD 4.6.2 with Sylpheed 0.8.5 which you probable
> already see that. I want to know how to set this up and put it to use.
Install the
y
On Fri, 18 Oct 2002, Bsd Neophyte wrote:
>
> --- Nathan Kinkade <[EMAIL PROTECTED]> wrote:
>
> <...snip...>
>
> > Well, does library expat.4 actually exist? If not, then what version
> > is the expat2 port installing? Assuming that expat2 installs a newer
> > version of the library, you might
On Fri, Oct 18, 2002 at 01:44:47PM -0400, Fuzzy wrote:
>
> I've done
>
> cvsup to RELENG_4_7
> make buildworld
> make buildkernel KERNCONF=POOHSN
> make installkernel KERNCONF=POOHSN
> reboot to singleuser
>
> while booted singleuser
>
> $fsck -p
> $mount -rw /
> $mount -a
> $cd /usr/src
> $mak
--- Nathan Kinkade <[EMAIL PROTECTED]> wrote:
<...snip...>
> Well, does library expat.4 actually exist? If not, then what version
> is the expat2 port installing? Assuming that expat2 installs a newer
> version of the library, you might be able to simply create a link named
> expat.4 and poin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>> (10.18.2002 @ 1044 PST): Fuzzy said, in 1.2K: <<
> I've done
>
> cvsup to RELENG_4_7
> make buildworld
> make buildkernel KERNCONF=POOHSN
> make installkernel KERNCONF=POOHSN
> reboot to singleuser
>
> while booted singleuser
>
> $fsck -p
> $moun
On Fri, 18 Oct 2002, Fuzzy wrote:
>
> I've done
>
> cvsup to RELENG_4_7
> make buildworld
> make buildkernel KERNCONF=POOHSN
> make installkernel KERNCONF=POOHSN
> reboot to singleuser
>
> while booted singleuser
>
> $fsck -p
> $mount -rw /
> $mount -a
> $cd /usr/src
> $make installworld
> mkdir
I have FreeBSD, 4.7 Stable running as a gateway box, with a Debian box
also on the network. The gateway is connected to a Comcast cable modem,
and is running ipfw as a firewall. Both boxes can see/connect each other
and the Internet.
I added a Powerbook, OS X, to the local network, configured /etc
Hi folks,
Where are people sending their sendmail configuration questions these
days? I've read the ratty documentation at sendmail.org and also done
more than my share of searching for answers through search engines.
And the latest revision of the sendmail book published by O'Reilly
was written
On Fri, Oct 18, 2002 at 09:22:15AM -0700, Bsd Neophyte wrote:
>
> --- Nathan Kinkade <[EMAIL PROTECTED]> wrote:
> > On Thu, Oct 17, 2002 at 11:01:09PM -0700, Bsd Neophyte wrote:
> > >
> > > i have problems installing apache.
> > >
> > > i'm getting the following errors eventhough i have expat-1.
On Thu, Oct 17, 2002 at 03:37:50PM -0700, Nick Jennings wrote:
> On Thu, Oct 17, 2002 at 05:03:12PM -0400, Joe Marcus Clarke wrote:
> > On Thu, 2002-10-17 at 17:05, Nick Jennings wrote:
> > >
> > > I had GNOME installed, and just recently upgraded to GNOME 2.0 (after
> > > cvsuping to the latest
Hi all-
I want to be able to print from Windows to LPD running on FreeBSD. I
cannot get it to work (via the print test page option in Windows).
In windows I have a printer HP LaserJet 6L, with the correct driver, using
standard TCP/IP port 192.168.1.205 (where I have FreeBSD/LPD). The port is
se
I had a process whose state under top was listed as devbuf.
This process seemed to be stuck and I was unable to kill it.
I ended up rebooting the box to reset it.
None of the man pages (TOP, PS) list the devbuf state.
What is it and what was the process trying to do?
I am guessing it had somet
On Thu, Oct 17, 2002 at 11:42:29AM -0700, paul beard wrote:
> Bryan Cassidy wrote:
> > Well, I guess no one replied to my e-mail because I didn't have a
> > Subject: or no one knows. I will ask again though just in case
> > something else happened. I use Mozilla as my web browser and when I
> > cli
>
> Hi all,
>
> I have a question related to PPP. I have a FreeBSD -STABLE
> box set up as a gateway to a dial up account with Internode.
>
> I have also 2 Windows boxes with the default gateway set to
> the FreeBSD box.
>
> Question: Is there anyway to set up an Icon on a Windows box
> that
--- Nathan Kinkade <[EMAIL PROTECTED]> wrote:
> On Thu, Oct 17, 2002 at 11:01:09PM -0700, Bsd Neophyte wrote:
> >
> > i have problems installing apache.
> >
> > i'm getting the following errors eventhough i have expat-1.95.4
> installed.
> >
> > --
> > ===> Installing for expat-1.9
List, please correct me if I am wrong:
The business-as-usual practice would be to not run -Stable, but rather
run a -Release. -Stable, although more stable than -Current, should not
be run in business-production, although my hunch is that many small
environments do.
If you are running -Stable, t
On Fri, 2002-10-18 at 10:02, Zeno Lee wrote:
> I have 4.7 RELEASE generic and gdk-pixbuf-0.20 fails to build because
> libjpeg is doubly linked. See message below.
>
> I currently have gdk-pixbuf-0.17 and I'm trying to upgrade to 0.20 because a
> few other gnome ports I want to install are depend
Is it a best practice to include debuging options in a -STABLE tree
kernel?
I have read the following article which suggests that a business-as-
usual practice should be to include debugging options.
>http://www.onlamp.com/pub/a/bsd/2002/03/21/Big_Scary_Daemons.html?page=1
The kernel develope
On Thu, Oct 17, 2002 at 11:01:09PM -0700, Bsd Neophyte wrote:
>
> i have problems installing apache.
>
> i'm getting the following errors eventhough i have expat-1.95.4 installed.
>
> --
> ===> Installing for expat-1.95.4
> ===> expat-1.95.4 is already installed - perhaps an older
# [EMAIL PROTECTED] / 2002-10-18 10:58:13 -0400:
> > > I realize what my problem was. I didn't reboot the system after I
> > > rebuild sendmail. Thanks everyone!!
> >
> > That was pretty lame.
>
> No piling on!
> They feel foolish for missing it already.
> Unsportsman like conduct penalty
This appears to be an issue with not having libintl available on FreeBSD. I
havn't tried these suggestions yet, but I thought I would pass them along.
Is the libintl stuff available through a port?
- Chris
Cut and Paste from another e-mail.
-
>
/usr/local/p
On Fri, Oct 18, 2002 at 04:54:33PM +0200, [EMAIL PROTECTED] wrote:
> I have often wondered about this..
> Surely there must be a way to do it.
Actually, I guess not, they're working on this problem at IETF. Maybe you
could look at this inetrnet-drafts:
draft-ietf-ipsec-nat-reqts-02.txt
Hope it h
On Thu, Oct 17, 2002 at 09:53:45PM -0700, Elite Scholar wrote:
> Environment
> FreeBSD mybox.com 4.7-STABLE FreeBSD 4.7-STABLE #2: Sun Oct 13 16:41:48 PDT 2002
>[EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYKERNEL i386
>
> Description
> Built and installed custom kernel. All seemed to have gone
I'm having some problems with a RAID setup and the network on a new system.
I haven't found anyone mentioning the problems in the searching I've done
(Google, FreeBSD Website, mailing lists). Hopefully someone can get me
pointed in the right direction or tell me what I'm missing (or fix a bug i
I have often wondered about this..
Surely there must be a way to do it.
-D
> -Original Message-
> From: Thomas Spreng [mailto:spreng@;insomniac.ch]
> Sent: Friday, October 18, 2002 11:09 AM
> To: Charles Henrich
> Cc: [EMAIL PROTECTED]
> Subject: Re: IPSEC/NAT issues
>
>
> On Thu, Oct 1
>
> > I realize what my problem was. I didn't reboot the system after I
> > rebuild sendmail. Thanks everyone!!
>
> That was pretty lame.
No piling on!
They feel foolish for missing it already.
Unsportsman like conduct penalty.
jerry
>
> How did you "rebuilt" sendmail? By
[EMAIL PROTECTED] wrote on 10/18/2002 03:24:47 AM:
> That is because of the nature of the FTP protocol. FTP uses
> two separate TCP connections: one for commands (port 21) and
> another one for data (port 20). What's going on when client
> tries to establish the FTP session?
I tried from my off
Try exec gnome-session
On Fri, 2002-10-18 at 08:53, Ronnie Clark wrote:
> I just finished compiling gnome2 from the ports. But
> now how do I start? I added the line "exec gnome" to
> my .xsession and .xinitrc files, typed in startx, and
> got an error saying, "could not find gnome". Is there
> a
I have 4.7 RELEASE generic and gdk-pixbuf-0.20 fails to build because
libjpeg is doubly linked. See message below.
I currently have gdk-pixbuf-0.17 and I'm trying to upgrade to 0.20 because a
few other gnome ports I want to install are depend on it.
Can anyone tell me why libjpeg becomes doubly
On Fri, 18 Oct 2002, Marcio Merlone wrote:
> Date: Fri, 18 Oct 2002 09:28:03 -0300
> From: Marcio Merlone <[EMAIL PROTECTED]>
> To: John Bleichert <[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED]
> Subject: Re: upgrading installed ports after CVSup
>
>
>
> John Bleichert wrote:
> > I've CVSup'd my s
Hello,
yesterday I've downloaded fbsd 4.7 iso and tried to boot on my laptop.
All was going well until the kernel started probing for my ethernet card
(which is SIS 900).
It recognized it as SIS 900 and it said "MII without PHY!" and rebooted.
I've looked around in the mailing list archive and fo
Put this line in your .xinitrc
exec gnome-session
Cheers,
Barry
--
Barry Byrne, IT Manager,
WBT Systems, Block 2, Harcourt Centre
Harcourt Street, Dublin 2, Ireland
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:owner-freebsd-questions@;FreeBSD.ORG]On Behalf Of Ronnie Clark
On Fri, Oct 18, 2002 at 04:45:16AM -0700, Rotaru Razvan wrote:
> Well I just installed FreeBSD release 4.5 through ftp. The problem is
> that /statd/sysinstall did not find the packages I requested on the ftp
> sites (i tried several sites that the installer listed). So now I have
> FreeBSD with X
Hi all,
In the meantime I've found some datapoints. This is a slapper DOS
attack, a linux work which has been modified to kill apaches or
to take them down.
All apaches (also 1.27) are vulnerable. It hammers the server till
all slots are filled, and then the apache server is not able to serve
an
Hello all,
I am running FreeBSD haar038 4.6-RELEASE FreeBSD 4.6-RELEASE
with XFree86-Server-4.2.1_3
I do not use a local client, but only connect with a remote client.
and get the following error:
14:39 #henk# [/home/henk> xdm -debug 1
DisplayManager.daemonMode/DisplayManager.DaemonMode value t
Bwt, please CC to me as I am not on the list,
thanks :-)
Best regards
Rafter
--
Get your free email from www.linuxmail.org
Powered by Outblaze
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
I just finished compiling gnome2 from the ports. But
now how do I start? I added the line "exec gnome" to
my .xsession and .xinitrc files, typed in startx, and
got an error saying, "could not find gnome". Is there
a different syntax?
Thanks in advance,
Ronnie Clark
__
- Original Message -
From: Kris Kennaway <[EMAIL PROTECTED]>
> The checksum mismatch should indicate to you that there was a problem
> downloading the file, or if the distfile has actually changed then the
> port may have already been updated. Update your ports tree, remove
> the distfile
Bryan Cassidy wrote:
Well, I guess no one replied to my e-mail because I didn't have a
Subject: or no one knows. I will ask again though just in case
something else happened. I use Mozilla as my web browser and when I
click a mailto: link it opens Mozilla Mail. Well, I don't want it to
open Mozi
John Bleichert wrote:
I've CVSup'd my system to 4.7 and all is well. Tonight I CVSup'd the ports
tree. Now, a couple quick questions:
Is there an automated way to upgrade all my installed ports, if an
update is available? Or do I just do it manually by remaking them?
Is this a job for portup
I have two different cards on my Netfinity 5000 server, a pci Netgear
FA311 (showing up as a NatSemi (sis0), and the onboard network card
which seems to have an AMD chipset (pcn0). If I have the onboard
ethernet card enabled at all and have an active cable connected to it
and restart the comp
Hello,
Well I just installed FreeBSD release 4.5 through ftp. The problem is
that /statd/sysinstall did not find the packages I requested on the ftp
sites (i tried several sites that the installer listed). So now I have
FreeBSD with XF386 (but no KDE), man pages, info files and several
other stuff
> The bktr supports the 848 family chipset as I recall. I have used the
> Xv extensions made for the GATOS and KATOS projects. They are Linux
> projects, but do some work on FreeBSD as well.
>
> Almost a year ago I had it working with an ATI Wonder which also has an
> BT878 chipset.
Yes..
I hav
> I had the same citrix-ica problems a while back. Reinstalling
> XFree86-libraries
> solved it.
>
> see
>
>http://www.freebsd.org/cgi/getmsg.cgi?fetch=542242+545230+/usr/local/www/db/text/2002/freebsd-ports/20020929.freebsd-ports
Well alright, that sounds plausible. Thanks Karel!
-Will
To
The bktr supports the 848 family chipset as I recall. I have used the Xv
extensions made for the GATOS and KATOS projects. They are Linux projects,
but do some work on FreeBSD as well.
Almost a year ago I had it working with an ATI Wonder which also has an BT878
chipset.
Peter
On Friday 18 Oct
Hellom
I'm trying to get native JDK13 to build but it insists on installing
open-motif and the whole slew of X11 libraries which I don't want to
have running on servers as there's simply no use at all for them on
headless machine standing in a datacenter some 25km from here. So is
there a way to bu
# [EMAIL PROTECTED] / 2002-10-17 07:58:48 -0400:
> On Thu, 17 Oct 2002, Ada Cheng wrote:
> > On Wed, 16 Oct 2002, Dirk Meyer wrote:
> > > Ada Cheng schrieb:,
> > > > I am unable to receive any email send to my box. I am running
> > > > 4.6.2 with sendmail 8.12.6_1.
> > > >
> > > > When I try to s
1 - 100 of 117 matches
Mail list logo
